Phenolic‐epoxy matrix curable by click chemistry—synthesis,curing, and syntactic foam composite properties

Alkyne functional phenolic resin was cured by azide functional epoxy resins making use of alkyne‐azide click reaction. For this, propargylated novolac (PN) was reacted with bisphenol A bisazide (BABA) and azido hydroxy propyloxy novolac (AHPN) leading to triazole‐linked phenolic‐epoxy networks. The click cure reaction was initiated at 40–65°C in presence of Cu₂I₂. Glass transition temperature (Tg) of the cured networks varied from 70°C to 75°C in the case of BABA‐PN and 75°C to 80°C in the case of AHPN‐PN. DSC and rheological studies revealed a single stage curing pattern for both the systems. The cured BABA‐PN and AHPN‐PN blends showed mass loss above 300°C because of decomposition of the triazole rings and the novolac backbone. Silica fiber‐reinforced syntactic foam composites derived from these resins possessed comparable mechanical properties and superior impact resistance vis‐a‐vis their phenolic resin analogues. The mechanical properties could be tuned by regulating the reactant stoichiometry. These low temperature addition curable resins are suited for light weight polymer composite for related applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41254.     

Oleogels from Glycerol‐Based Lyotropic Liquid Crystals: Phase Diagrams and Structural Characterization

In the course of our studies on structured reverse lyotropic liquid crystals (LLC) as oleogels, a system was designed with the desired physical and rheology properties for cosmetic and pharmaceutical applications. The aqueous phase was partially replaced by glycerol to minimize bacteriological problems and obtain specific rheology characteristics. The constructed phase diagrams are based on ternary mixtures of glycerol monooleate (GMO), decane, water, and glycerol. The main lyotropic mesophase obtained in this study was reverse hexagonal derived from dilution line 8:2 (72 wt% GMO and 18 wt% decane) and 10 wt% water; or water:glycerol (wt ratios 3:1 and 1:1) mixture. It was found that heat‐cool fluctuation caused formation of new pseudo‐equilibrium structures with mesomorphic transformations to more fluid and less ordered mesostructures. Replacing up to 50 wt% of the water by glycerol significantly increases the gel phase region in the phase diagram, meaning more structural compositional options. The structural parameters were determined using cross‐polarized light microscopy (CPLM), differential scanning calorimeter (DSC), powder X‐ray diffraction (PXRD), and small angle X‐ray scattering (SAXS). Rheological measurements revealed viscoelastic properties of lyotropic liquid crystals with a decrease in the elasticity (G′), plasticity (G″), and complex viscosity (η*), as a function of increasing the glycerol content.     

Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.     

Genetic Distance and Age Affect the Cuticular Chemical Profiles of the Clonal Ant Cerapachys biroi

Although cuticular hydrocarbons (CHCs) have received much attention from biologists because of their important role in insect communication, few studies have addressed the chemical ecology of clonal species of eusocial insects. In this study we investigated whether and how differences in CHCs relate to the genetics and reproductive dynamics of the parthenogenetic ant Cerapachys biroi. We collected individuals of different ages and subcastes from several colonies belonging to four clonal lineages, and analyzed their cuticular chemical signature. CHCs varied according to colonies and clonal lineages in two independent data sets, and correlations were found between genetic and chemical distances between colonies. This supports the results of previous research showing that C. biroi workers discriminate between nestmates and non-nestmates, especially when they belong to different clonal lineages. In C. biroi, the production of individuals of a morphological subcaste specialized in reproduction is inversely proportional to colony-level fertility. As chemical signatures usually correlate with fertility and reproductive activity in social Hymenoptera, we asked whether CHCs could function as fertility-signaling primer pheromones determining larval subcaste fate in C. biroi. Interestingly, and contrary to findings for several other ant species, fertility and reproductive activity showed no correlation with chemical signatures, suggesting the absence of fertility related CHCs. This implies that other cues are responsible for subcaste differentiation in this species.     

Modification of narrow‐spectrum peptidomimetic polyurethanes with fatty acid chains confers broad‐spectrum antibacterial activity

Each year, thousands of patients die from antimicrobial‐resistant bacterial infections that fail to respond to conventional antibiotic treatment. Antimicrobial polymers are a promising new method of combating antibiotic‐resistant bacterial infections. We have previously reported the synthesis of a series of narrow‐spectrum peptidomimetic antimicrobial polyurethanes that are effective against Gram‐negative bacteria, such as Escherichia coli; however, these polymers are not effective against Gram‐positive bacteria, such as Staphylococcus aureus. With the aim of understanding the correlation between chemical structure and antibacterial activity, we have subsequently developed three structural variants of these antimicrobial polyurethanes using post‐polymerization modification with decanoic acid and oleic acid. Our results show that such modifications converted the narrow‐spectrum antibacterial activity of these polymers into broad‐spectrum activity against Gram‐positive species such as S. aureus, however, also increasing their toxicity to mammalian cells. Mechanistic studies of bacterial membrane disruption illustrate the differences in antibacterial action between the various polymers. The results demonstrate the challenge of balancing antimicrobial activity and mammalian cell compatibility in the design of antimicrobial polymer compositions. © 2019 Society of Chemical Industry     

Encapsulation and controlled release in polyacrylamide hydrogels

A novel host–guest system was developed by the encapsulation of simple organic guest molecules in the hydrophilic molecular architecture of crosslinked polyacrylamide hydrogels. The crosslinking agents used for the preparation of the host systems were hexanediol dimethacrylate (HDDMA) and divinyl benzene (DVB). This enabled us to construct hydrogels with different hydrophobic–hydrophilic equilibria. The model guest system used for the studies was benzoic acid. The selections gave simple but excellent host–guest systems with fine polar–apolar balancing. Polyacrylamide hydrogels with encapsulated benzoic acid were prepared with varying crosslink densities (5, 10, 15, and 20 mol %) by the solution polymerization technique. The rate of release of the host from the host–guest assembly was studied in different swelling conditions. The rate of release depended on the interaction forces between the polymer and the solvents. Polar forces, dispersion forces, and hydrogen bonding all played a vital role. The swelling behavior of the host‐polymer system and the host–guest assembly was analyzed and compared by the Flory–Rehner method. The amount of benzoic acid encapsulated in the DVB‐crosslinked polymer was higher than in the HDDMA‐crosslinked polymer, and the rate of release was in the order 5 > 15 > 10 > 20% for the DVB‐crosslinked polymer. The rate of release for the HDDMA‐crosslinked host–guest assembly was in the order 10 > 5 > 15 > 20%. These results were in excellent agreement with those of the Flory–Rehner analysis of the swelling properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1816–1824, 2004     

Fuzzy multicriteria selection of alternatives: The worst‐case method

In this article, we propose the method of the multicriteria alternative selection under uncertainty. The basis of the method is the principle of the Bellman–Zadeh fuzzy measures intersection and nine‐point linguistic rating scale of Saaty. The novelty of the method presented here consists of the fact that it does not require labor‐intensive procedures, requiring arraying and array processing of paired comparisons matrix. Instead, special correlations are used, which are based on the comparison with the worst alternative and the least important criterion. As an example for the utilization of our method, we use the problem for choosing cars. © 2010 Wiley Periodicals, Inc.     

High performance HTLNR/epoxy blend—Phase morphology and thermo-mechanical properties

An attempt was made to toughen diglycidyl ether of bisphenol A (DGEBA) type epoxy resin with liquid natural rubber possessing hydroxyl functionality (HTLNR). Epon 250 epoxy monomer is cured using nadic methyl anhydride as hardener in presence of N, N dimethyl benzyl amine as accelerator. HTLNR of different concentrations up to 20 wt % is used as modifier for epoxy resin. The addition HTLNR to an anhydride hardener/epoxy monomer mixture has given rise to the formation of phase-separated structure, consisting of small spherical liquid natural rubber particles bonded to the surrounding epoxy matrix. The particle size increased with increase in rubber content. The viscoelastic properties of the blends were analyzed using dynamic mechanical thermal analysis. The T_g corresponding to epoxy rich phase was evident from the dynamic mechanical spectrum, while the T_g of the rubber phase was overlapped by the β relaxation of epoxy phase. Glass transition of the epoxy phase decreased linearly as a function of the amount of rubber. The mechanical properties such as impact and fracture toughness were also carefully examined. The impact and fracture toughness increase with HTLNR content. A threefold increase in impact strength was observed with 15 wt % HTLNR/epoxy blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Asking questions on handwritten document collections

International Journal on Document Analysis and Recognition (IJDAR) - This work addresses the problem of Question Answering (QA) on handwritten document collections. Unlike typical QA and Visual...     

Models of Influence in Online Social Networks

Online social networks gained their popularity from relationships users can build with each other. These social ties play an important role in asserting users' behaviors in a social network. For example, a user might purchase a product that his friend recently bought. Such phenomenon is called social influence, which is used to study users' behavior when the action of one user can affect the behavior of his neighbors in a social network. Social influence is increasingly investigated nowadays as it can help spreading messages widely, particularly in the context of marketing, to rapidly promote products and services based on social friends' behavior in the network. This wide interest in social influence raises the need to develop models to evaluate the rate of social influence. In this paper, we discuss metrics used to measure influence probabilities. Then, we reveal means to maximize social influence by identifying and using the most influential users in a social network. Along with these contributions, we also survey existing social influence models, and classify them into an original categorization framework. Then, based on our proposed metrics, we show the results of an experimental evaluation to compare the influence power of some of the surveyed salient models used to maximize social influence.