一种基于Kirchhoff积分的快速三维非均匀弹性介质地震波场模拟方法

提出了一种基于Kirchhoff积分的快速地震波场数值模拟算法。在地下弹性介质的速度、反射界面的空间位置及反射率均已知的情况下，可以利川该算法计算三维非均匀弹性介质模型中的反射地震波场。讨论了算法的计算效率和计算精度。针对基丁Kirchhoff积分的二维地震波场模拟计算量巨大这一问题，采用了两种尺度网格单元和限制积分区域等手段，不仅降低了计算量，节省了内存，同时还保待了足够的计算精度。利用数值模拟对算法的有效性进行了验证。     

Dynamic resource allocation in OFDM systems: an overview of cross-layer optimization principles and techniques

Recently, a lot of research effort has been spent on cross-layer system design. It has been shown that cross-layer mechanisms (i.e., policies) potentially provide significant performance gains for various systems. In this article we review several aspects of cross-layer system optimization regarding wireless OFDM systems. We discuss basic optimization models and present selected heuristic approaches realizing cross-layer policies by means of dynamic resource allocation. Two specific areas are treated separately: models and dynamic approaches for single transmitter/receiver pairs (i.e., a point-to-point communication scenario) as well as models and approaches for point-to-multipoint communication scenarios (e.g., the downlink of a wireless cell). This article provides basic knowledge in order to investigate future OFDM cross-layer-optimization issues     

Re‐evaluation of the Optimal Operating Conditions for the Primary End of an Integrated Steel Plant using Multi‐objective Genetic Algorithms and Nash Equilibrium

Some existing work on optimizing the operational cost of the primary end of an integrated steel plant containing two blast furnaces utilizing both pellets and sinters, an electric furnace and a basic oxygen furnace was further advanced using a multi‐objective genetic algorithm, along with a Nash equilibrium analysis. The new formulation was able to improve the earlier results very significantly, suggesting the efficacy of the multi‐objective approach over the more conventional single objective genetic algorithms.     

Parallel kinematic concept for stationary high performance cutting in wood machining centers

In recent years parallel kinematic machines for wood machining have come into use more frequently. Despite first promising prototypes, these machines are single solutions for specific applications. To meet the requirements of shorter product life cycles and higher product diversity, high flexibility is demanded of the machining system. This paper presents a new wood machining center obtaining both, the reduction of the primary and secondary processing times. The machine concept, based on a parallel kinematic structure, allows high operating speeds and accelerations not only for workpiece machining but also for handling. Thus, the machine can be used without any external handling devices. The kinematic structure originates from a plane closed five-bar chain with two linear drives and additional drive axes for stroke and rotation. In order to increase the useable workspace a continuous motion between different assembly modes is realized. To guarantee a high feed rate and to minimize set-up times, an optimized dust exhaustion is included.     

Lessons learned from Brazilian natural gas industry reform

Over the past decades many countries have reformed their infrastructure industries. Although these reforms have been broadly similar for the most part, aiming at introducing competition in potentially competitive segments, the contexts in which they have been carried out differ. This is due to the past regulatory experience in each country, the maturity of the industry and/or the number of agents when the reform process started. The Brazilian natural gas reform stands out due to the country's singular conditions. The development of the natural gas industry in Brazil was grounded on stepping up supplies through integration with neighboring nations (particularly Bolivia) and establishing a competitive environment by lowering the barriers hampering the arrival of new investors. However, natural gas is located at the crossroads of two main energy chains: oil and hydroelectricity. This article analyzes the Brazilian natural gas reform, and extracts lessons from this process. The low capillarity of transportation and distribution systems continues to be the main bottleneck of the country's natural gas industry. The challenges of the new legal framework are to encourage investments in networks and guarantee supply, to allow the industry to consolidate and mature, against a backdrop of rapid changes in the world market.     

Synthesis and photopolymerization kinetics of new flexible diacrylate and dimethacrylate crosslinkers based on C18 diacid

A series of new di(meth)acrylate monomers was synthesized from the reactions of methyl α-hydroxymethylacrylate (MHMA), ethyl α-hydroxymethylacrylate (EHMA), hydroxyethyl acrylate (HEA) and hydroxyethylmethacrylate (HEMA) with α,ω-C18 diacid chloride. The photopolymerization behavior and reaction kinetics of the synthesized monomers were investigated using photoinitiation with differential scanning calorimetry. The polymerization rates, conversions and kinetic constants for propagation and termination were determined for each of the monomers. The maximum rate of polymerizations of the diacrylate monomers was higher than that of the dimethacrylate monomers and followed the order: HDDA (1,6-hexanediol diacrylate)>HEA-C18>EHMA-C18∼HEMA-C18>MHMA-C18. The total conversions obtained were 78, 75, 72, 64 and 69% for MHMA-C18, EHMA-C18, HEMA-C18, HEA-C18 and HDDA, respectively, indicating comparable or higher conversions for methacrylates despite their lower rates of polymerization. Propagation and termination mechanisms of the monomers were investigated by plotting propagation and termination rate constants as a function of conversion.     

Bestimmung natürlich vorkommender steroidaler Sexualhormone (Androgene und Gestagene) in Rindfleisch

The content of 10 naturally occurring steroidal sex hormones (androgens and progestogens), their biosynthetic precursors and metabolites was determined in 62 samples of beef (bulls, steers, heifers). After enzymatic hydrolysis of their conjugates, the steroids were extracted from the tissue by liquid-liquid extraction and purified by solid phase extraction. The identification and quantification was carried out by GC-MS of the trimethylsilyl ethers. The progestogens progesterone and pregnenolone were quantitatively dominant (43,7 and 6,5 μg/kg respectively). The highest steroid concentrations were determined in female cattle.     

Kinetics of vanillin oxidation

Vanillin can be produced by oxidation of kraft lignin, with air, in alkaline medium. The optimal conditions for vanillin production strongly depend on pH and temperature. This paper addresses the effect of temperature and pH on vanillin degradation by oxidation. Experiments were carried out in a wide range of vanillin concentration, oxygen partial pressure, temperature and pH. Simple models are proposed to explain the observed rate of vanillin consumption under conditions of high alkalinity (pH>12) and lower alkalinity (pH<12). At pH>12,the reaction rate of vanillin oxidation is first order in dissolved oxygen concentration [O₂] and in vanillin concentration [C], i.e., (?r_C) ∝[O₂][C]; at pH<12, the rate is zero order in oxygen concentration and second order in vanillin concentration, i.e., (?r_C)∝f(pH)[C]².     

Double-blind, parallel, comparative multicentre study of a new combination of diltiazem and hydrochlorothiazide with individual components in patients with mild or moderate hypertension

OBJECTIVE: To compare the antihypertensive efficacy and tolerability of a new combination preparation of diltiazem (150 mg) and hydrochlorothiazide (12.5 mg) with the individual constituents in patients with mild/moderate hypertension. DESIGN: Multi-centre, double-blind, randomised parallel group study. PATIENTS: Seventy-one patients with essential hypertension were recruited to the study. TREATMENT: Following completion of the placebo run-in period 63 patients fulfilled the prerandomisation criteria and entered the 10 week treatment period. Patients were randomised to receive either the combination preparation (D 150 mg/H 12.5 mg), diltiazem (150 mg) or hydrochlorthiazide (12.5 mg). The dosage was increased in three patients who had not attained target blood pressure (BP) control after 6 weeks. OUTCOME MEASURES: Response to treatment assessed by change from baseline in clinic and 24 h ambulatory BP. RESULTS: The proportion of patients achieving target BP (a reduction in resting supine diastolic blood pressure (DBP) to below 90 mm Hg or a reduction of 10 mm Hg from baseline) was 80% in the combination group, 55% in the diltiazem group, and 38% in the hydrochlorothiazide group. The respective figures for reduction in supine DBP from baseline were 13.5 mm Hg, 11.2 mm Hg and 5.9 mm Hg. A similar treatment order appeared throughout each of the efficacy variables. BP control throughout the 24 h dosing interval was demonstrated by ambulatory BP monitoring. Each treatment was well tolerated. CONCLUSION: This study provides clear evidence of the efficacy of combination therapy with diltiazem and hydrochlorothiazide in the management of patients with hypertension.