The electrochemical generation of ferrate at pressed iron powder electrodes: effect of various operating parameters

The effect of various parameters on the yield for the electrochemical generation of ferrate was investigated for pressed pellet iron electrodes. An optimum yield was observed for a NaOH concentration of 14-16 M of the anolyte. The rate of iron dissolution and generation of ferrate increased when the temperature of the electrochemical cell is raised from room temperature to 50 °C. The pressure applied to the iron powder during the formation of the pellet electrode did not have a strong influence on ferrate generation, at least in the range investigated in this work (5-8 ton/cm²). On the other hand, the purity, particle size and packing density of the powders are important factors in determining the current yield for ferrate generation and the maximum yield was not obtained with the smallest particles investigated (<10 μm). An optimum yield for ferrate generation of 60% was observed for a 2 h electrolysis. The surface of the pressed pellet iron electrode was also analyzed following the electrolysis in 14 M NaOH by X-ray diffraction and X-ray photoelectron spectroscopies. The electrogenerated ferrate was not detected at the electrode surface but the presence of various iron oxides and sodium carbonate was evidenced by these techniques.     

Synthetic and Biological Studies of Sesquiterpene Polygodial: Activity of 9‐Epipolygodial against Drug‐Resistant Cancer Cells

Polygodial, a terpenoid dialdehyde isolated from Polygonum hydropiper L., is a known agonist of the transient receptor potential vanilloid 1 (TRPV1). In this investigation a series of polygodial analogues were prepared and investigated for TRPV1‐agonist and anticancer activities. These experiments led to the identification of 9‐epipolygodial, which has antiproliferative potency significantly exceeding that of polygodial. 9‐Epipolygodial was found to maintain potency against apoptosis‐resistant cancer cells as well as those displaying the multidrug‐resistant (MDR) phenotype. In addition, the chemical feasibility for the previously proposed mechanism of action of polygodial, involving the formation of a Paal–Knorr pyrrole with a lysine residue on the target protein, was demonstrated by the synthesis of a stable polygodial pyrrole derivative. These studies reveal rich chemical and biological properties associated with polygodial and its direct derivatives. These compounds should inspire further work in this area aimed at the development of new pharmacological agents, or the exploration of novel mechanisms of covalent modification of biological molecules with natural products.     

Vertically aligned carbon nanotube‐based composite: Elaboration and monitoring of the nanotubes alignment

We present the different elaboration steps of a composite formed of carbon nanotubes (CNT) carpet embedded in an epoxy polymer. Detailed characterization at each step of the elaboration process is performed. The good alignment of CNT in as‐grown carpets is kept all along the elaboration process of the composite, as it is measured at both macro and microscopic scales by X‐ray scattering. We also ensured by X‐ray fluorescence measurements that the iron‐based catalyst particles used for the synthesis were removed from the carpet after a high temperature post‐annealing treatment. These measurements give valuable information for further applications involving unidirectional nanotube composites and membranes, where CNT alignment is a key parameter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39730.     

Development of Fluorogenic Probes for Rapid High-Contrast Imaging of Transient Nuclear Localization of Sirtuin 3

Protein labeling using fluorogenic probes enables the facile visualization of proteins of interest. Herein, we report new fluorogenic probes consisting of a rationally designed coumarin ligand for the live-cell fluorogenic labeling of the photoactive yellow protein (PYP)-tag. On the basis of the photochemical mechanisms of coumarin and the probe–tag interactions, we introduced a hydroxy group into an environment-sensitive coumarin ligand to modulate its spectroscopic properties and increase the labeling reaction rate. The resulting probe had a higher labeling reaction rate constant and a greater fluorescence OFF–ON ratio than any previously developed PYP-tag labeling probe. The probe enabled the fluorogenic labeling of intracellular proteins within minutes. Furthermore, we used our probe to investigate the localization of sirtuin 3 (SIRT3), a mitochondrial deacetylase. Although the nuclear localization of SIRT3 has been controversial, this transient nuclear localization was clearly captured by the rapid, high-contrast imaging enabled by our probe.     

The Multifunctional Sactipeptide Ruminococcin C1 Displays Potent Antibacterial Activity In Vivo as Well as Other Beneficial Properties for Human Health

The world is on the verge of a major antibiotic crisis as the emergence of resistant bacteria is increasing, and very few novel molecules have been discovered since the 1960s. In this context, scientists have been exploring alternatives to conventional antibiotics, such as ribosomally synthesized and post-translationally modified peptides (RiPPs). Interestingly, the highly potent in vitro antibacterial activity and safety of ruminococcin C1, a recently discovered RiPP belonging to the sactipeptide subclass, has been demonstrated. The present results show that ruminococcin C1 is efficient at curing infection and at protecting challenged mice from Clostridium perfringens with a lower dose than the conventional antibiotic vancomycin. Moreover, antimicrobial peptide (AMP) is also effective against this pathogen in the complex microbial community of the gut environment, with a selective impact on a few bacterial genera, while maintaining a global homeostasis of the microbiome. In addition, ruminococcin C1 exhibits other biological activities that could be beneficial for human health, as well as other fields of applications. Overall, this study, by using an in vivo infection approach, confirms the antimicrobial clinical potential and highlights the multiple functional properties of ruminococcin C1, thus extending its therapeutic interest.     

Effects of five natural gonadotropin-releasing hormones on cell suspensions of marine bivalve gonad: stimulation of gonial DNA synthesis

Gonadotropin-releasing hormones (GnRH) constitute a family of neuropeptides which are important regulators of reproduction in vertebrates. The effect of mammalian GnRH (mGnRH), salmon GnRH, chicken GnRH-I, chicken GnRH-II, and lamprey GnRH-I on [3H]thymidine incorporation into DNA of dissociated gonadal cells of marine bivalves has been studied. The incorporation of [3H]thymidine is linear between 1.5 and 8 h of incubation. All five GnRHs significantly increased DNA synthesis in gonial cells of Crassostrea gigas. The maximal activation was about of 135-140% above control. The activation is dose dependent, over the range 10(-11) to 10(-6) M, but is modulated by the physiological condition of the cells and the stage of sexual maturity of the gonad. mGnRH has also a mitogenic effect in dissociated mantle cells of Mytilus edulis. The effect of mGnRH is blocked by a GnRH antagonist ([D-pGlu1,D-Phe2, D-Trp3,6]GnRH, 5 x 10(-6)M) in C. gigas as well as in M. edulis, suggesting that the GnRH action in the gonad is mediated by specific receptors for GnRH or GnRH-like peptides. The existence of GnRH-immunoreactive neurons and fibers in the cerebral and pedal ganglia of M. edulis was demonstrated by immunocytochemistry. They are located principally in the anterior internal area of the cerebral ganglia, close to the cerebral commissure and in the posterior part of the pedal ganglia. The presence of GnRH-responsive cells and GnRH-like immunoreactive material suggests that peptides of the GnRH-like family are present and functional in bivalve molluscs.     

Learning correct responses and errors in the Hebb repetition effect: Two faces of the same coin.

In a serial recall task, the Hebb repetition effect occurs when recall performance improves for a sequence repeated throughout the experimental session. This phenomenon has been replicated many times. Nevertheless, such cumulative learning seldom leads to perfect recall of the whole sequence, and errors persist. Here the authors report evidence that there is another side to the Hebb repetition effect that involves learning errors produced in a repeated sequence. A learning measure based on past recalls (correct or incorrect) shows that the probability of a given response increases with the number of prior occurrences of that response. The pattern of results reveals another manifestation of the Hebb repetition effect and speaks to the nature of implicit learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermal polymerization of thiol–ene network‐forming systems

The thermal polymerization of a tetrafunctional thiol (PETMP) and divinyl ether (TEGDVE) was monitored by temperature‐ramping differential scanning calorimetry (DSC) and the effects of inhibitor type and concentration, oxygen inhibition and initiator type were studied. The incorporation of inhibitors was required to produce a stable system at room temperature. Butylated hydroxytoluene (BHT) inhibited polymerization at low temperatures, but was inefficient at high temperatures and polymerization rates, and hence BHT is an ideal stabilizer. In contrast, a nitroxide inhibitor (NO‐67) was a very effective inhibitor and no polymerization occurred until all of the nitroxide was depleted. The presence of oxygen retarded the onset of polymerization but did not change the final conversion significantly. Polymerization with initiators having higher half‐life temperatures shifted the DSC peak to higher temperature because the rate of initiator decomposition and thus initiation was slower. Rheological investigations of the cure at different temperatures revealed that the gel time decreased significantly with increasing cure temperature, and the calculated apparent activation energy for PETMP/TEGDVE was 54 kJ mol^?1. Dynamical mechanical thermal analysis of the cured material was undertaken and frequency‐superposed results revealed that the glass transition region of PETMP/TEGDVE/azobisisobutyronitrile was much narrower than that of free‐radically cured dimethacrylate, but was similar to that of an epoxy resin cured with an aromatic diamine. This behaviour could be attributed to PETMP/TEGDVE network homogeneity, or to the less constrained crosslinks in the PETMP/TEGDVE network. Copyright © 2007 Society of Chemical Industry     

Spectral Conformal Parameterization

We present a spectral approach to automatically and efficiently obtain discrete free‐boundary conformal parameterizations of triangle mesh patches, without the common artifacts due to positional constraints on vertices and without undue bias introduced by sampling irregularity. High‐quality parameterizations are computed through a constrained minimization of a discrete weighted conformal energy by finding the largest eigenvalue/eigenvector of a generalized eigenvalue problem involving sparse, symmetric matrices. We demonstrate that this novel and robust approach improves on previous linear techniques both quantitatively and qualitatively.