Phytochrome‐Based Extracellular Matrix with Reversibly Tunable Mechanical Properties

Interrogation and control of cellular fate and function using optogenetics is providing revolutionary insights into biology. Optogenetic control of cells is achieved by coupling genetically encoded photoreceptors to cellular effectors and enables unprecedented spatiotemporal control of signaling processes. Here, a fast and reversibly switchable photoreceptor is used to tune the mechanical properties of polymer materials in a fully reversible, wavelength‐specific, and dose‐ and space‐controlled manner. By integrating engineered cyanobacterial phytochrome 1 into a poly(ethylene glycol) matrix, hydrogel materials responsive to light in the cell‐compatible red/far‐red spectrum are synthesized. These materials are applied to study in human mesenchymal stem cells how different mechanosignaling pathways respond to changing mechanical environments and to control the migration of primary immune cells in 3D. This optogenetics‐inspired matrix allows fundamental questions of how cells react to dynamic mechanical environments to be addressed. Further, remote control of such matrices can create new opportunities for tissue engineering or provide a basis for optically stimulated drug depots.     

Flexural behavior of stratified reinforced concrete: construction,testing, analysis,and design

Stratified concrete poses a promising alternative for construction. Its fresh and hardened properties have been studied at the material level; however, structural behavior in steel reinforced specimens has not been studied. This paper focuses on the flexural behavior of eight stratified reinforced concrete (SRC) specimens representing slices from a slab or non-bearing wall. Specimens with two stratified concrete designs and three steel ratios were tested and compared to estimates from a fiber element numerical model and rectangular stress-block design methods from ACI 318 and Eurocode 2. The results suggest that SRC has similar damage modes as ordinary reinforced concrete (ORC). The fiber element model accurately estimated the measured behavior, while ACI 318 and Eurocode 2 differed from the experimental results by <25%. These prediction accuracies are similar to those for ORC. Therefore, the flexural design of SRC can be done using both fiber element and rectangular stress-block approaches.     

The role of grain size in static and cyclic deformation behaviour of a laser reversion annealed metastable austenitic steel

Different grain sizes were created in a metastable 17Cr‐7Mn‐7Ni steel by martensite‐to‐austenite reversion at different temperatures using a laser beam. Two fully reverted material states obtained at 990°C and 780°C exhibited average grain sizes of 7.7 and 2.7 μm, respectively. The third microstructure (610°C) consisted of grains at different stages of recrystallization and deformed austenite. A hot‐pressed, coarse‐grained counterpart was studied for reference. The yield and tensile strengths increased with refined grain size, maintaining reasonable elongation except for the heterogeneous microstructure. Total strain‐controlled fatigue tests revealed increasing initial stress amplitudes but decreasing cyclic hardening and fatigue‐induced α′‐martensite formation with decreasing grain size. Fatigue life was slightly improved for the 2.7‐μm grain size. Contrary, the heterogeneous microstructure yielded an inferior lifetime, especially at high strain amplitudes. Examinations of the cyclically deformed microstructure showed that the characteristic deformation band structure was less pronounced in refined grains.     

Electric field–temperature phase diagram of sodium bismuth titanate-based relaxor ferroelectrics

The electric field–temperature phase diagrams of three bismuth sodium titanate-based relaxor ferroelectrics are reported, namely 0.94(Na_1/2Bi_1/2TiO₃)–0.06(BaTiO₃), 0.80(Na_1/2Bi_1/2TiO₃)–0.20(K_1/2Bi_1/2TiO₃) and 0.75(Na_1/2Bi_1/2TiO₃)–0.25(SrTiO₃). Relaxor behavior is demonstrated by temperature-dependent dielectric permittivity measurements in the unpoled and poled states, as well as by the field-induced phase transition into a ferroelectric phase from the relaxor phase. From temperature-dependent thermometry measurements, we identified the threshold electric field to induce the ferroelectric phase and obtained the released latent heat of the phase transition. We determined the nonergodic and ergodic relaxor phase temperature range based on the absence or presence of reversibility of the relaxor to ferroelectric transition. For all three compositions, the electric field–temperature phase diagram was constructed and a critical point was identified. The constructed electric field–temperature phase diagrams are useful to find optimum operational ranges of ferroelectrics and relaxors for electromechanical and electrocaloric applications.     

Quantum Dots-Based Optical Fiber Temperature Sensors Fabricated by Layer-by-Layer

Two types of CdTe quantum dots of different sizes (4 and 5 nm) were successfully deposited on optical fibers using the layer-by-layer electrostatic self-assembly method. The sensors showed a linear and reversible variation of the emission wavelength for a temperature range from 30 degC to 100 degC, with a sensitivity of 0.2 nm/degC     

Alternative configuration for an optical ring resonator angular rate sensor by using a standard laser diode

In this work, we present an alternative approach to angular velocity optical sensing based on two-ring resonators. This configuration admits the use of a standard laser diode source (0.1 nm, 10,000 MHz, FWHM) reaching higher sensitivities when narrow spectral laser sources (1 MHz, FWHM) are used. We compare this configuration with the standard single-ring resonator angular rate sensor (SRARS), which must use a narrow laser at input. Finally, we conclude that the sensitivity of this new approach can also be enhanced by coupling high-power broadband laser sources in a large range (from 1°/h to 10,000°/h), reaching performance similar to that of a standard SRARS configuration.     

ESA-based in-fiber nanocavity for hydrogen-peroxide detection

A fiber-optic sensor sensitive to hydrogen peroxide has been designed based on the electrostatic layer-by-layer self-assembly method. Prussian blue has been deposited in a polymeric structure formed by Poly(allylamine hydrochloride) and poly(acrylic acid). The concentration that can be detected range between 10/sup -6/-10/sup -3/ M, and recovery of the sensor after immersion into a reductive agent was demonstrated. The response of the sensor is independent of the pH for values that range between 4-7.4. Some rules for estimation of the refractive index of the material deposited and the thickness of the bilayers are also presented.     

Presence of epithelial cells in the medullary canal after spinal anesthesia

BACKGROUND AND AIM: Several authors have focused on a causal link between the onset of neurological complications after lumbar injections and the fact that epithelial cells may be drawn into the vertebral canal during these procedures. Complications may arise both early (cephalea, septic and aseptic meningitis) and late (epidermoid tumours). The authors aimed to evaluate whether skin fragments which are carried down by the needle during subarachnoid anesthesia may even be present in the epidural or subarachnoid space three days later and may therefore justify the onset of the above neurological syndromes. METHODS: Five adult cats under narcosis underwent subarachnoid anesthesia using disposable 22G Quincke type needles. Between 0.7 and 1 ml isobaric bupivacaine at 0.50% was injected. The presence of the motor block of the lower limbs was ascertained once the effects of general anesthesia wore off. On the third day, again under general anesthesia, cardio-respiratory arrest was provoked by intravenous injection. Samples of meninges were collected in the injection area. After fixation in a phosphate glutaraldehyde buffer, dehydration in acetone, dehydration by critical point and gold metalisation, the samples were examined using SEM. RESULTS: No epidermal cells were found on the surface of the meninges. On the other hand, a squamous epithelial cell was observed which drained inside a sectioned epidural vessel towards the systemic circulation. CONCLUSIONS: This study confirms the possibility that, after subarachnoid anesthesia using 22G Quincke needles, skin fragments may enter the spinal canal. The permanence or otherwise of the epithelial fragments on the third day depends on the size of the fragment drawn down and the efficacy of the drainage system which removes isolated epithelial cells. This phenomenon may justify the self-limiting character of cephalea and meningisms which, even if not treated, regress in a few days, as well as the scarce development of epidermoid tumours.