Phase-based multidimensional volume registration

We present a method for accurate image registration and motion compensation in multidimensional signals, such as two-dimensional (2-D) X-ray images and three-dimensional (3-D) computed tomography/magnetic resonance imaging volumes. The method is based on phase from quadrature filters, which makes it robust to noise and temporal intensity variations. The method is equally applicable to signals of two, three or higher number of dimensions. We use parametric models, e.g., affine models, finite elements or local affine models with global regularization. Experimental results show high accuracy for 2-D and 3-D motion compensation.     

Survey and comparison of message authentication solutions on wireless sensor networks

Security is an important concern in any modern network. This also applies to Wireless Sensor Networks (WSNs), especially those used in applications that monitor sensitive information (e.g., health care applications). However, the highly constrained nature of sensors imposes a difficult challenge: their reduced availability of memory, processing power and energy hinders the deployment of many modern cryptographic algorithms considered secure. For this reason, the choice of the most memory-, processing- and energy-efficient security solutions is of vital importance in WSNs. To date, a number of extensive analyses comparing different encryption algorithms and key management schemes have been developed, while very little attention has been given to message authentication solutions. In this paper, aiming to close this gap, we identify cipher-based Message Authentication Codes (MACs) and Authenticated Encryption with Associated Data (AEAD) schemes suitable for WSNs and then evaluate their features and performance on a real platform (TelosB). As a result of this analysis, we identify the recommended choices depending on the characteristics of the target network and available hardware.     

Reverberation Chamber技术应用于手机OTA量测

一般混响室多用于EMC测试中,文章针对手机的OTA全辐射功率与全性灵敏度在混响室中测试方法提出说明,并针对小型的多输入多输出天线于多重路径环境测试测试方式说明。     

System identification from noisy measurements by using instrumental variables and subspace fitting

This paper considers the estimation of the parameters of a linear discrete-time system from noise-perturbed input and output measurements. The conditions imposed on the system are fairly general. In particular, the input and output noises are allowed to be auto-correlated and they may be cross-correlated as well. The proposed method makes use of an instrumental variable (IV)-vector to produce a covariance matrix that is pre- and postmultiplied by some prechosen weights. The singular vectors of the so-obtained matrix possess complete information on the system parameters. A weighted subspace fitting (WSF) method is then applied to the aforementioned singular vectors to consistently estimate the parameters of the system. The IV-WSF technique suggested herein is noniterative and easy to implement, and has a small computational burden. The asymptotic distribution of its estimation errors is derived and the result is used to motivate the choice of the weighting matrix in the WSF step and also to predict the estimation accuracy. Numerical examples are included to illustrate the performance achievable by the method.This work has been supported by the Swedish Research Council of Engineering Sciences under contract 93-669 and by the Göran Gustafsson Foundation.     

Simulations and experiments on a 12 kW direct driven PM synchronous generator for wind power

A direct driven permanent magnet (PM) synchronous generator has been designed and constructed and results from the first experimental tests are presented. The generator has been designed using the finite element method (FEM) and dynamic simulations have been performed to study the generator. The simulations are performed by using an electromagnetic model, which is described by a combined field and circuit equation model and is solved in a finite element environment. The stator winding of the generator consists of circular cables and the rotor has surface mounted, arched PMs. A complete experimental setup has been constructed consisting of a motor, a frequency converter, a gearbox and electrical loads. Oscilloscopes are used to measure the voltage and the current for each phase. Measurements have been performed for both full load and no load at rated speed. The harmonic content of the voltage is analyzed and compared to results from simulations. Furthermore, the generated electric power has been calculated from knowing the voltage and current and is compared to the simulated power. The agreement between experimental results and results from simulations based on finite element calculations is very high, especially considering harmonics. Several sources of error are suggested that could cause the small differences between the simulated results and the measured data for the constructed generator.     

System study of carbon dioxide (CO2) capture in bio-based motor fuel production

A number of different technologies for producing renewable motor fuels have been studied; some effects of applying carbon dioxide (CO₂) capture to the production of renewable motor fuels are described in this paper. Some of the technologies studied are well suited for CO₂ capture. However, it is shown that the advantages with CO₂ capture for these technologies are not enough to offset their shortcomings described in previous studies, which show that the largest CO₂ reduction from biomass in Sweden may be achieved by producing fuel pellets for coal substitution or using the biomass in combined heat and power plants. A conclusion of the present paper is that even with CO₂ capture added to the respective technology, it is inefficient to use renewable resources for motor fuel production if the aim is to achieve as high CO₂ emission reduction as possible per input of biomass. Therefore, the large Swedish subsidies of the production of motor fuels appear sub-optimal, also when the possibility of CO₂ capture is considered. Nevertheless, incorporating CO₂ capture in the production of renewable motor fuels from biomass might be a cost-effective way of reducing CO₂ emissions.     

Adaptive Correction of Errors in Residue Coupled MASH ΔΣ Modulators

MASH delta-sigma () modulators consist of a cascade of several lower order single-loop modulators. In an ideal cascade, the quantization error from all but the last stage are digitally canceled. The drawback with a cascaded design is the requirement of precise matching of contributions from different quantizers to cancel lower order quantization noise from intermediate delta-sigma stages. This paper presents a new, adaptive improvement to the residue coupled MASH delta sigma modulator. The adaptive corrections significantly reduce the sensitivity to analog imperfections. The result is a simple MASH delta-sigma modulator with high precision. Simulations of a 1-1 MASH circuit structure with errors and corrections are included to confirm the theory.     

MODE-type algorithm for estimating damped, undamped, or explosive modes

We propose a new algorithm for estimating the parameters of damped, undamped, or explosive sinusoidal signals. The algorithm resembles the MODE algorithm, which is commonly used for direction of arrival estimation in the array signal processing field. It is derived as a natural approximation to an asymptotically (high-SNR) optimal parameter estimator and has excellent statistical accuracy. Nevertheless, it is computationally simple and easy to implement. Numerical examples are included to illustrate the performance of the proposed method.This work has been supported by the Swedish Research Council for Engineering Sciences (TFR).     

爱立信IMS weShare分享每一天(系列之二)如何提供出色的用户体验?

爱立信IMS weShare业务有20%的开发与用户视觉体验相关(用户界面、图标、标签以及进度条),其它的80%则主要致力于设备间的系统.与此相对比,用户的体验则完全(100%)有赖于其可接触的事物.     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.