New low band gap alternating polyfluorene copolymer-based photovoltaic cells

New low band gap alternating polyfluorene copolymers were synthesized for use in plastic solar cells and their optical, electrochemical, and photovoltaic characteristics were determined. These polymers incorporated fluorene units alternating with groups including electron-withdrawing (A) and electron-donating (D) groups in donor–acceptor–donor (DAD) sequence to achieve the lowering of band gaps. The HOMO–LUMO values were estimated from electrochemical studies. By varying the donor and acceptor strength and position of the solubilizing substituents, similar HOMO values were obtained. These values were also found to correlate well with the open circuit voltage (V_OC) values determined from photovoltaic data of the polymers blended with the acceptor PCBM. Despite similar HOMO values, the absorption spectra of the polymers differ significantly. This prompted the preparation of photovoltaic devices consisting of blends of two polymers with complementary absorptions in combination with PCBM to harvest more photons in the polymer solar cells.     

Highly reflective coatings for interior and exterior steel cladding and the energy efficiency of buildings

The effect of surface heat-radiation properties of coil-coated steel cladding material on the energy efficiency of buildings in Nordic climate is addressed by parallel temperature and energy usage measurements in a series of test cabins with different exterior solar reflectivity and interior thermal reflectivity. During one year, a number of one- or two-week experiments with air conditioner cooling and electrical floor heating were made while logging air-, radiation- and surface temperatures, energy consumption and weather conditions. Measurements show significant energy savings in the test cabins by the use of high thermal reflectivity interior surfaces both during heating and cooling and a strongly reduced cooling demand by the use of high solar reflectivity exterior surfaces. Results are interpreted within the context of a steady-state energy flux model, to illuminate the importance of surface resistance properties (radiation and convective heat dissipation).     

Options for the Swedish steel industry - Energy efficiency measures and fuel conversion

The processes of iron and steel making are energy intensive and consume large quantities of electricity and fossil fuels. In order to meet future climate targets and energy prices, the iron and steel industry has to improve its energy and resource efficiency. For the iron and steel industry to utilize its energy resources more efficiently and at the same time reduce its CO₂ emissions a number of options are available. In this paper, opportunities for both integrated and scrap-based steel plants are presented and some of the options are electricity production, fuel conversion, methane reforming of coke oven gas and partnership in industrial symbiosis. The options are evaluated from a system perspective and more specific measures are reported for two Swedish case companies: SSAB Strip Products and Sandvik AB. The survey shows that both case companies have great potentials to reduce their CO₂ emissions.     

Simulations and experiments on a 12 kW direct driven PM synchronous generator for wind power

A direct driven permanent magnet (PM) synchronous generator has been designed and constructed and results from the first experimental tests are presented. The generator has been designed using the finite element method (FEM) and dynamic simulations have been performed to study the generator. The simulations are performed by using an electromagnetic model, which is described by a combined field and circuit equation model and is solved in a finite element environment. The stator winding of the generator consists of circular cables and the rotor has surface mounted, arched PMs. A complete experimental setup has been constructed consisting of a motor, a frequency converter, a gearbox and electrical loads. Oscilloscopes are used to measure the voltage and the current for each phase. Measurements have been performed for both full load and no load at rated speed. The harmonic content of the voltage is analyzed and compared to results from simulations. Furthermore, the generated electric power has been calculated from knowing the voltage and current and is compared to the simulated power. The agreement between experimental results and results from simulations based on finite element calculations is very high, especially considering harmonics. Several sources of error are suggested that could cause the small differences between the simulated results and the measured data for the constructed generator.     

System study of carbon dioxide (CO2) capture in bio-based motor fuel production

A number of different technologies for producing renewable motor fuels have been studied; some effects of applying carbon dioxide (CO₂) capture to the production of renewable motor fuels are described in this paper. Some of the technologies studied are well suited for CO₂ capture. However, it is shown that the advantages with CO₂ capture for these technologies are not enough to offset their shortcomings described in previous studies, which show that the largest CO₂ reduction from biomass in Sweden may be achieved by producing fuel pellets for coal substitution or using the biomass in combined heat and power plants. A conclusion of the present paper is that even with CO₂ capture added to the respective technology, it is inefficient to use renewable resources for motor fuel production if the aim is to achieve as high CO₂ emission reduction as possible per input of biomass. Therefore, the large Swedish subsidies of the production of motor fuels appear sub-optimal, also when the possibility of CO₂ capture is considered. Nevertheless, incorporating CO₂ capture in the production of renewable motor fuels from biomass might be a cost-effective way of reducing CO₂ emissions.     

Simplified Large‐Area Manufacturing of Organic Electrochemical Transistors Combining Printing and a Self‐Aligning Laser Ablation Step

A hybrid manufacturing approach for organic electrochemical transistors (OECTs) on flexible substrates is reported. The technology is based on conventional and digital printing (screen and inkjet printing), laser processing, and post‐press technologies. A careful selection of the conductive, dielectric, and semiconductor materials with respect to their optical properties enables a self‐aligning pattern formation which results in a significant reduction of the usual registration problems during manufacturing. For the prototype OECTs, based on this technology, on/off ratios up to 600 and switching times of 100 milliseconds at gate voltages in the range of 1 V were obtained.     

Pattern Noise in the Frequency ΔΣ Modulator

In this paper, we show that the first-order frequency delta–sigma modulator is equivalent to a traditional delta–sigma modulator with respect to pattern noise. We further propose two techniques for reducing the effect of pattern noise. The first technique is based on time-domain dithering which is implemented by adding white phase noise to the FM signal. The second technique is based on locating the narrow dynamic range that may be in this kind of modulators, in a pattern noise valley. This technique can utilize pattern noise to make the modulator provide significantly higher digital resolution than the white quantization noise model predicts. Finally, the theory is verified by measurements.     

Snowmobile fatalities aspects on preventive measures from a 25-year review

During October 1973 through May 1998, 157 snowmobile fatalities were autopsied in Northern Sweden, including 131 riders, 15 passengers, six occupants with unknown position and five victims pulled by a snowmobile. Most fatalities occurred during March and April (41%), on weekends/holidays (75%), between 18:00 and 02:00 h (59%), during darkness (63%), in clear weather (84%) and at leisure time (94%). The median age was 39 years and 92% were men. The most common causes of death were blunt trauma (53%) and drowning (38%). A total of 64% were inebriated by alcohol, with a mean blood alcohol concentration of 1.7 g/l. More inebriated victims were found during weekends/holidays than on weekdays (75 vs. 51%) and during nighttime than during daytime (92 vs. 52). Driving into water was the most common event (38%) followed by collisions with immobile objects (20%). Alcohol and speeding were the most common contributors to the crashes, while flotation snowmobile suit and helmet use were considered to be the most important injury prevention factors.     

Die Verteilung von Zink zwischen Ferrit und Austenit und die Thermodynamik des Zweistoffsystems Eisen—Zink

Verfahren zur Herstellung sehr reiner Eisen-Zink-Legierungen. Ermittlung der Sättigungsgehalte an Zink im Ferrit und Austenit mit Hilfe der Mikrosonde. Berechnungen zur Beschreibung der thermodynamischen Eigenschaften des zinklegierten paramagnetischen Ferrits und des zinklegierten Austenits unter Zuhilfenahme von thermodynamischen Werten aus dem Schrifttum. Berechnung des Gleichgewichts Austenit/Ferrit, Festlegung der γ-Schleife des Zustandsschaubildes und Vergleich mit den ermittelten Werten. Berechnung der Löslichkeit der Γ-Phase im α-Eisen mit Hilfe der bereits bekannten Thermodynamik der α-Phase. Berechnung einer metastabilen Mischungslücke und deren Spinodale im Ferrit.     

Definitions of terms for a thermodynamic data bank—Part 3

For communication with a thermodynamic data bank, it is important to use terms that have strict definitions. The definitions presented here were prepared for use with a solution data bank developed by SGTE (Scientific Group Thermodata Europe), but should prove useful to others working in this field. Part 1 was included in Vol. 2, No. 2, and Part 2 in Vol. 3, No. 3 of theBulletin.