Antioxidant Extraction from Mustard (Brassica juncea) Seed Meal Using High‐Intensity Ultrasound

Brassicaceae oilseeds provide feedstocks for the biofuels industry, but value‐added coproducts are necessary to supply financial incentives for increased production. Our objective was to use high‐intensity ultrasound to optimize extraction of antioxidants from mustard (Brassica juncea) seed meal. The ultrasound‐assisted extraction (UAE) variables included temperature, solvent‐to‐material ratio, sonication duration, and EtOH concentration. Extracts were analyzed for total phenolics content (TPC), antioxidant activity, and sinapine content. Conventional extraction using water and 70% EtOH (v/v) at 80 °C for 3×30 min yielded 7.83 ± 0.07 and 8.81 ± 0.17 mg sinapic acid equivalents (SAE)/g meal, respectively. UAE extraction at 40 °C for 30 min yielded similar phenolics content (8.85 ± 0.33 mg SAE/g meal) as conventional hot ethanolic extraction, but required less time and lower temperature. The highest TPC (13.79 ± 0.38 mg SAE/g meal) was in the 7‐d aqueous extracts. Sonicated solutions of pure sinapine and sinapic acid showed 1st‐order reaction kinetics with greater degradation of isolated compounds than those present in extracts. Sinapine contained in extracts showed insignificant (P < 0.05) degradation after 30 min of sonication. Our research indicates that ultrasound treatment can assist the extraction of antioxidants from B. juncea meal by reducing both the temperature and time requirement without significant degradation of the primary antioxidants present.     

MULTIPLE FORMS OF α-AMYLASE IN MALTING BARLEY VAR. EMMA.

Multiple forms of α-amylase arise from translation of separate messages and post-translational proteolytic modification during malting. α-amylase activity is tolerant of proteolysis. The enzyme appears to have two domains one of which is associated with starch cleavage. The second site which binds cyclodextrin is destroyed by proteolysis. Cleavage yields a low molecular weight form which retains α-amylase activity.     

Inhibition of Bacterial Pathogens in Medium and on Spinach Leaf Surfaces using Plant‐Derived Antimicrobials Loaded in Surfactant Micelles

Encapsulation of hydrophobic plant essential oil components (EOC) into surfactant micelles can assist the decontamination of fresh produce surfaces from bacterial pathogens during postharvest washing. Loading of eugenol and carvacrol into surfactant micelles of polysorbate 20 (Tween 20), Surfynol® 485W, sodium dodecyl sulfate (SDS), and CytoGuard® LA 20 (CG20) was determined by identification of the EOC/surfactant‐specific maximum additive concentration (MAC). Rheological behavior of dilute EOC‐containing micelles was then tested to determine micelle tolerance to shearing. Antimicrobial efficacy of EOC micelles against Escherichia coli O157:H7 and Salmonella enterica serotype Saintpaul was first evaluated by the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Pathogen‐inoculated spinach was treated with eugenol‐containing micelles applied via spraying or immersion methods. SDS micelles produced the highest MACs for EOCs, while Tween 20 loaded the lowest amount of EOCs. Micelles demonstrated Newtonian behavior in response to shearing. SDS and CG20‐derived micelles containing EOCs produced the lowest MICs and MBCs for pathogens. E. coli O157:H7 and S. Saintpaul were reduced on spinach surfaces by application of eugenol micelles, though no differences in numbers of surviving pathogens were observed when methods of antimicrobial micelle application (spraying, immersion) was compared (P ≥ 0.05). Data suggest eugenol in SDS and CG20 micelles may be useful for produce surface decontamination from bacterial pathogens during postharvest washing.     

Clothing systems for outdoor activities

Participation in outdoor activities can improve mental, physical and social well-being. Such activities also present significant physiological strain and risks such as hypothermia; therefore, correct choice and usage of clothing is extremely important. The aim of this review is to critically analyse the literature regarding outdoor clothing systems, focusing on the layers comprising a typical clothing system. Additionally, alternative systems, potential improvements and future trends are discussed.     

Molecular studies to identify the Fusarium species responsible for HT-2 and T-2 mycotoxins in UK oats

High levels of Fusarium mycotoxins HT-2 and T-2 have been detected in UK oats since surveys started in 2002. Fusarium langsethiae and the closely related species F. sporotrichioides have previously been associated with the contamination of cereals with type A trichothecenes HT-2 and T-2 in Nordic countries. Preliminary microbiological analysis of UK oat samples with high concentrations of HT-2 and T-2 detected and isolated F. langsethiae and F. poae but not the other type A trichothecene producing species F. sporotrichioides, F. sibiricum and F. armeniacum. Two hundred and forty oat flour samples with a known mycotoxin profile were selected from a previous four year study (2002-2005) to cover the full concentration range from below the limit of quantification (<20 μg/kg) to 9,990 μg/kg HT-2+T-2 combined. All samples were analysed for the DNA of F. langsethiae, F. poae and F. sporotrichioides based on previously published PCR assays. F. langsethiae was detectable in nearly all samples; F. poae was detected in 90% of samples whereas F. sporotrichioides was not detected in any sample. A real-time PCR assay was developed to quantify F. langsethiae DNA in plant material. The assay could quantify as low as 10(-4)ngF. langsethiae DNA/μl. Based on this assay and a previously published assay for F. poae, both species were quantified in the oat flour samples with known HT-2+T-2 content. Results showed a good regression (P<0.001, r(2)=0.60) between F. langsethiae DNA and HT-2+T-2 concentration. F. poae DNA concentration was not correlated to HT2+T2 concentration (P=0.448) but was weakly correlated to nivalenol concentration (P<0.001, r(2)=0.09). Multiple regression with F. langsethiae and F. poae DNA as explanatory variates identified that both F. langsethiae and F. poae DNA were highly significant (P<0.001) but F. poae DNA only accounted for an additional 4% of the variance and the estimate was negative, indicating that higher concentrations of F. poae DNA were correlated with slightly lower concentrations of HT2+T2 detected. A stronger regression (P<0.001, r(2)=0.77) between F. langsethiae DNA and HT-2+T-2 was obtained after extraction and quantification of DNA and mycotoxins from individual oat grains. The results from this study provide strong evidence that F. langsethiae is the primary, if not sole, fungus responsible for high HT-2 and T-2 in UK oats.     

Estrogenic activity and steroid hormones in swine wastewater through a lagoon constructed-wetland system

Anaerobic lagoons and treatment wetlands are used worldwide to treat wastewater from dense livestock production facilities; however, there is very limited data on the hormonal activity of the wastewater effluent produced by these treatment systems. The objectives of this experiment were to measure (1) the hormonal activity of the initial effluent and (2) the effectiveness of a lagoon-constructed wetland treatment system for producing an effluent with a low hormonal activity. Wastewater samples were taken in April, July, and November 2004 and July 2005 from a lagoon-constructed wetland system at a swine farrowing facility. Estrogenic activity (in vitro E-screen assay), 17 beta-estradiol (E2), and testosterone concentrations (LC/MS-MS) were measured. A high correlation was found between estradiol equivalents determined by E-screen and LC/MS-MS (R2 = 0.82). Nutrient removal was measured to ensure that the wetlands were functioning in a manner similar to literature reports. Nutrient removals were typical for treatment wetlands: TKN 59-75% and orthophosphate 0-18%. Wetlands decreased estrogenic activity by 83-93%. Estrone was the most persistent estrogenic compound. Constructed wetlands produced effluents with estrogenic activity below the lowest equivalent E2 concentration known to have an effect on fish (10 ng/L or approximately 37 x 10(-12) M).     

Formation of chloroform and other chlorinated byproducts by chlorination of triclosan-containing antibacterial products

Triclosan is a widely used antibacterial agent found in many personal hygiene products. Although it has previously been established that pure triclosan and free chlorine readily react, interactions between triclosan-containing consumer products and free chlorine have not previously been analyzed in great depth. Sixteen double-blinded solutions including both triclosan-containing (1.14-3.12 mg triclosan/g product) and triclosan-free products were contacted with free chlorine at pH 7. Products detected included (chlorophenoxy) phenols, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and chloroform. The daughter product yields were found to be highly variable and were dependent on the antimicrobial product investigated, the free chlorine to triclosan ratio, and the temperature at which the study was conducted. Lowering the temperature from 40 to 30 degrees C resulted in a decreased average chloroform yield from 0.50 to 0.37 mol chloroform/mol triclosan consumed after 1 min of reaction time for an initial free chlorine concentration of 4.0 mg/L as Cl2. At 40 degrees C the average molar chloroform yields decreased to 0.29 and <0.1 when the initial free chlorine concentration was decreased to either 2.0 or 1.0 mg/L as Cl2, respectively. Field experiments, in which Atlanta, GA and Danville, VA tap waters were augmented with various soap products, exhibited results varying from the laboratory experiments in that different productyields were observed. These differences are attributed to the chlorine demand of constituents in the tap water. A simple exposure model suggests that exposure to chloroform can be significant under some conditions.     

Long-term stability of organic carbon-stimulated chromate reduction in contaminated soils and its relation to manganese redox status

In situ reduction of toxic Cr(VI) to less hazardous Cr(III) is becoming a popular strategy for remediating contaminated soils. However, the long-term stability of reduced Cr remains to be understood, especially given the common presence of Mn(III, IV) oxides that re-oxidize Cr(III). This 4.6 year laboratory study tracked Cr and Mn redox transformations in soils contaminated with Cr(VI), which were then treated with different amounts of organic carbon (OC). Changes in Cr and Mn oxidation states within soils were directly and nondestructively measured using micro-X-ray absorption near-edge structure spectroscopy. Chromate reduction was roughly first-order, and the extent of reduction was enhanced with higher OC additions. However, significant Cr(III) re-oxidation occurred in soils exposed to the highest Cr(VI) concentrations (2560 mg kg(-1)). Transient Cr(Ill) re-oxidation up to 420 mg kg(-1) was measured at 1.1 years after OC treatment, followed by further reduction. Chromate concentrations increased by 220 mg kg(-1) at the end of the study (4.6 years) in one soil. The causal role that the Mn oxidation state had in re-oxidizing Cr was supported by trends in Mn K-edge energies. These results provide strong evidence for long-term dependence of soil Cr oxidation states on balances between OC availability and Mn redox status.     

Do increases in cigarette prices lead to increases in sales of cigarettes with high tar and nicotine yields?

We used scanner data on cigarette prices and sales collected from supermarkets across the United States from 1994 to 2004 to test the hypothesis that cigarette prices are positively correlated with sales of cigarettes with higher tar and nicotine content. During this period the average inflation-adjusted price for menthol cigarettes increased 55.8%. Price elasticities from multivariate regression models suggest that this price increase led to an increase of 1.73% in sales-weighted average tar yields and a 1.28% increase in sales-weighted average nicotine yields for menthol cigarettes. The 50.5% price increase of nonmenthol varieties over the same period yielded an estimated increase of 1% in tar per cigarette but no statistically significant increase in nicotine yields. An ordered probit model of the impact of cigarette prices on cigarette strength (ultra-light, light, full flavor, unfiltered) offers an explanation: As cigarette prices increase, the probability that stronger cigarette types will be sold increases. This effect is larger for menthol than for nonmenthol cigarettes. Our results are consistent with earlier population-based cross-sectional and longitudinal studies showing that higher cigarette prices and taxes are associated with increasing consumption of higher-yield cigarettes by smokers.