Stimulus-responsive fluidic dispersions of rod shaped liquid crystal polymer colloids

Electrically responsive liquid crystal polymer nanorods were fabricated by template synthesis. Liquid crystal monomers are templated by alumina membranes. Molecular ordering of the liquid crystal molecules resulted from the confinement in the sub-micron channels and this ordering can be captured permanently through photo-polymerization. Template removal and sonication result in individual rods that can be reoriented by applied electrical and magnetic fields. Such anisotropic particles have significant potential applications in electro-rheological fluids and in active mixing in microfluidic channels.     

Insight from in situ microscopy into which precipitate morphology can enable high strength in magnesium alloys

Magnesium alloys, while boasting light weight, suffer from a major drawback in their relatively low strength. Identifying the microstructural features that are most effective in strengthening is therefore a pressing challenge. Deformation twinning often mediates plastic yielding in magnesium alloys. Unfortunately, due to the complexity involved in the twinning mechanism and twin-precipitate interactions, the optimal precipitate morphology that can best impede twinning has yet to be singled out. Based on the understanding of twinning mechanism in magnesium alloys, here we propose that the lamellar precipitates or the network of plate-shaped precipitates are most effective in suppressing deformation twinning. This has been verified through quantitative in situ tests inside a transmission electron microscope on a series of magnesium alloys containing precipitates with different morphology. The insight gained is expected to have general implications for strengthening strategies and alloy design.     

Hole‐Transfer Dependence on Blend Morphology and Energy Level Alignment in Polymer: ITIC Photovoltaic Materials

Bulk‐heterojunction organic photovoltaic materials containing nonfullerene acceptors (NFAs) have seen remarkable advances in the past year, finally surpassing fullerenes in performance. Indeed, acceptors based on indacenodithiophene (IDT) have become synonymous with high power conversion efficiencies (PCEs). Nevertheless, NFAs have yet to achieve fill factors (FFs) comparable to those of the highest‐performing fullerene‐based materials. To address this seeming anomaly, this study examines a high efficiency IDT‐based acceptor, ITIC , paired with three donor polymers known to achieve high FFs with fullerenes, PTPD3T , PBTI3T , and PBTSA3T . Excellent PCEs up to 8.43% are achieved from PTPD3T:ITIC blends, reflecting good charge transport, optimal morphology, and efficient ITIC to PTPD3T hole‐transfer, as observed by femtosecond transient absorption spectroscopy. Hole‐transfer is observed from ITIC to PBTI3T and PBTSA3T , but less efficiently, reflecting measurably inferior morphology and nonoptimal energy level alignment, resulting in PCEs of 5.34% and 4.65%, respectively. This work demonstrates the importance of proper morphology and kinetics of ITIC → donor polymer hole‐transfer in boosting the performance of polymer: ITIC photovoltaic bulk heterojunction blends.     

The Diffuse Interstellar Cloud Experiment: a high-resolution far-ultraviolet spectrograph

We have designed, assembled, and launched a sounding rocket payload to perform high-resolution far-ultraviolet spectroscopy. The instrument is functionally a Cassegrain telescope followed by a modified Rowland spectrograph. The spectrograph was designed to achieve a resolving power (R=λ/δλ) of 60,000 in a compact package by adding a magnifying secondary optic. This is enabled by using a holographically ruled grating to minimize aberrations induced by the second optic. We designed the instrument to observe two stars on opposing sides of a nearby hot/cold gas interface. Obtaining spectra of the O VI doublet in absorption toward these stars can provide new insight into the processes governing hot gas in the local interstellar medium. Here we present the optical design and alignment of the telescope and spectrograph, as well as flight results.     

Cracked Film Lithography with CuGaOx Buffers for Bifacial CdTe Photovoltaics

Bifacial CdTe solar cells with greater power density than the monofacial baselines are demonstrated by using a CuGaO_x rear interface buffer that passivates while reducing sheet resistance and contact resistance. Inserting CuGaO_x between the CdTe and Au increases mean power density from 18.0 ± 0.5 to 19.8 ± 0.4 mW cm⁻² for one sun front illumination. However, coupling CuGaO_x with a transparent conductive oxide leads to an electrical barrier. Instead, CuGaO_x is integrated with cracked film lithography (CFL)-patterned metal grids. CFL grid wires are spaced narrowly enough (≈10 µm) to alleviate semiconductor resistance while retaining enough passivation and transmittance for a bifacial power gain: bifacial CuGaO_x/CFL grids generate 19.1 ± 0.6 mW cm⁻² for 1 sun front + 0.08 sun rear illumination and 20.0 ± 0.6 mW cm⁻² at 1 sun front + 0.52 sun rear—the highest reported power density at field albedo conditions for a scaled polycrystalline absorber.     

Antioxidant Extraction from Mustard (Brassica juncea) Seed Meal Using High‐Intensity Ultrasound

Brassicaceae oilseeds provide feedstocks for the biofuels industry, but value‐added coproducts are necessary to supply financial incentives for increased production. Our objective was to use high‐intensity ultrasound to optimize extraction of antioxidants from mustard (Brassica juncea) seed meal. The ultrasound‐assisted extraction (UAE) variables included temperature, solvent‐to‐material ratio, sonication duration, and EtOH concentration. Extracts were analyzed for total phenolics content (TPC), antioxidant activity, and sinapine content. Conventional extraction using water and 70% EtOH (v/v) at 80 °C for 3×30 min yielded 7.83 ± 0.07 and 8.81 ± 0.17 mg sinapic acid equivalents (SAE)/g meal, respectively. UAE extraction at 40 °C for 30 min yielded similar phenolics content (8.85 ± 0.33 mg SAE/g meal) as conventional hot ethanolic extraction, but required less time and lower temperature. The highest TPC (13.79 ± 0.38 mg SAE/g meal) was in the 7‐d aqueous extracts. Sonicated solutions of pure sinapine and sinapic acid showed 1st‐order reaction kinetics with greater degradation of isolated compounds than those present in extracts. Sinapine contained in extracts showed insignificant (P < 0.05) degradation after 30 min of sonication. Our research indicates that ultrasound treatment can assist the extraction of antioxidants from B. juncea meal by reducing both the temperature and time requirement without significant degradation of the primary antioxidants present.     

MULTIPLE FORMS OF α-AMYLASE IN MALTING BARLEY VAR. EMMA.

Multiple forms of α-amylase arise from translation of separate messages and post-translational proteolytic modification during malting. α-amylase activity is tolerant of proteolysis. The enzyme appears to have two domains one of which is associated with starch cleavage. The second site which binds cyclodextrin is destroyed by proteolysis. Cleavage yields a low molecular weight form which retains α-amylase activity.