Discrimination of aerial deposition sources of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran downwind from a pulp mill near Ketchikan, Alaska

Drinking water is supplied by individual roof-catchment systems for homes and businesses near a dissolving sulfite pulp mill (now closed) located just north of Ketchikan in southeast Alaska. This study was conducted to determine if polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) found in the sediments of the roof-catchment cisterns resulted from historical deposition of stack emissions from the pulp mill's multi-fuel power boilers. Fly ash from the power boilers had maximum total PCDD/F concentrations of 3.08 x 10(5)-3.10 x 10(6) ng/kg, which resulted from combustion of bleach plant wastewater sludge and saltwater-soaked wood waste. Cistern sediments had maximum total PCDD/F concentrations of 7.71 x 10(4) ng/kg. Potential sources of PCDDs/Fs in the cistern sediments were considered to be automobile exhaust, heating oil combustion, and private trash burning as well as pulp mill boiler emissions. Discriminant analysis was used to analyze differences between profiles of tetra through octa homologue classes of PCDDs/ Fs (defined as proportional contributions to total concentration) from different source terms. Homologue profiles of potential sources from Ketchikan included in this analysis were fly ash collected from the mill's power boilers and soils collected from background areas (areas with similar PCDD/F sources as the residences [e.g., auto exhaust and burn barrels] near the mill but beyond the zone of aerial deposition of emissions from the mill). Profiles for emissions from automobile exhaust, fertilizers, oil heating, residential trash burning, and residential wood heating were also included in the source "training" data set (for the discriminant analysis) using data from published literature. The classification rules developed from the discriminant analysis were applied to the following test media sampled at Ketchikan: roof-catchment cistern sediments and soils collected from areas in the vicinity of the mill's power boilers (i.e., nearby residential or commercial [developed] areas, on the mill property, and nearby forestlands). The homologue profiles of cistern sediment and nearby developed area soil samples were similar to background soils, whereas the profiles for the forestland soil samples (influenced by emissions from the mill but not other anthropogenic sources) closely matched the fly ash pattern. The homologue profiles of the emission sources from published data were more similar to one another than either background soils or fly ash. Soil samples from the mill property were classified as members of all source groups. On the basis of these analyses, the composition of PCDDs/Fs detected in the cistern sediments is typical of Ketchikan background conditions and not reflective of mill emissions.     

Advanced mercury removal from gold leachate solutions prior to gold and silver extraction: a field study from an active gold mine in Peru

Mercury contamination in the Gold-Cyanide Process (GCP) is a serious health and environmental problem. Following the heap leaching of gold and silver ores with NaCN solutions, portions of the mercury-cyano complexes often adhere to the activated carbon (AC) used to extract the gold. During the electrowinning and retorting steps, mercury can be (and often is) emitted to the air as a vapor. This poses a severe health hazard to plant workers and the local environment. Additional concerns relate to the safety of workers when handling the mercury-laden AC. Currently, mercury treatment from the heap leach solution is nonexistent. This is due to the fact that chelating ligands which can effectively work under the adverse pH conditions (as present in the heap leachate solutions) do not exist. In an effort to economically and effectively treat the leachate solution prior to passing over the AC, a dipotassium salt of 1,3-benzenediamidoethanethiol (BDET2-) has been developed to irreversibly bind and precipitate the mercury. The ligand has proven to be highly effective by selectively reducing mercury levels from average initial concentrations of 34.5 ppm (parts per million) to 0.014 ppm within 10 min and to 0.008 ppm within 15 min. X-ray powder diffraction (XRD), proton nuclear magnetic resonance (1H NMR), Raman, and infrared (IR) spectroscopy demonstrate the formation of a mercury-ligand compound, which remains insoluble over pH ranges of 0.0-14.0. Leachate samples from an active gold mine in Peru have been analyzed using cold vapor atomic fluorescence (CVAF) and inductively coupled plasma optical emission spectroscopy (ICP-OES) for metal concentrations before and after treatment with the BDET2- ligand.     

Global analysis of the riverine transport of 90Sr and 37Cs

Atmospheric nuclear weapons explosions and large-scale nuclear accidents may contaminate large areas of land with the long-lived radionuclides 137Cs and 90Sr. The mobility and bioavailability of these radionuclides in the environment is dependent primarily on soil characteristics and changes significantly over time after fallout (1-4). Radioisotope concentrations in different rivers and at different times after fallout vary over 2-3 orders of magnitude. Many previous studies have concentrated on the interactions of radiocesium and radiostrontium with various environmental components, but there are currently no operative models fortheirtransport over large spatial areas. We collected time-series measurements of 90Sr and 137Cs in 25 major European and Asian rivers and (using digital data sets with global coverage) determined characteristics of each of the rivers' catchments. This work has established, for the first time, a quantitative link between riverine transport of these radioisotopes and catchment and soil characteristics at a global scale. A generalized predictive model accounting for time changes in river concentrations and variation in catchment characteristics is developed. This can be used to predict the long-term riverine transport of these radiologically important radionuclides following any large-scale nuclear incident in North America, Europe, or (European and Asian) Russia.     

Applications of contaminant fate and bioaccumulation models in assessing ecological risks of chemicals: a case study for gasoline hydrocarbons

Mass balance models of chemical fate and transport can be applied in ecological risk assessments for quantitative estimation of concentrations in air, water, soil, and sediment. These concentrations can, in turn, be used to estimate organism exposures and ultimately internal tissue concentrations that can be compared to mode-of-action-based critical body residues that induce toxic effects. From this comparison, risks to the exposed organism can be evaluated. To demonstrate the use of fate models in ecological risk assessment, we combine the EQuilibrium Criterion (EQC) environmental fate model with a simple screening level biouptake model for three representative organisms: a bird, a mammal, and a fish. This effort yields estimates of internal body concentrations that can be compared with levels known to elicit toxic effects. As an illustration, we present an analysis of 24 hydrocarbon components of gasoline that differ in properties but are assumed to elicit toxicity by a common narcotic mode of action. Results demonstrate that differences in chemical properties and mode of entry into the environment lead to profound differences in the efficiency of transport from emission to target biota. We discussthe implications of these results and draw attention to the insights gained about regional fate and ecological risks associated with gasoline. This approach is suitable for assessing single chemicals or mixtures that have similar modes of action. We conclude that the model-based methodologies presented are widely applicable for screening level ecological risk assessments that support effective chemicals management.     

Hexavalent uranium diffusion into soils from concentrated acidic and alkaline solutions

Uranium contamination of soils and sediments often originates from acidic or alkaline waste sources, with diffusion being a major transport mechanism. Measurements of U(VI) diffusion from initially pH 2 and pH 11 solutions into a slightly alkaline Altamont soil and a neutral Oak Ridge soil were obtained through monitoring uptake from boundary reservoirs and from U concentration profiles within soil columns. The soils provided pH buffering, resulting in diffusion at nearly constant pH. Micro X-ray absorption near edge structure spectra confirmed that U remained in U(VI) forms in all soils. Time trends of U(VI) depletion from reservoirs and U(VI) concentration profiles within soil columns yielded Kdvalues consistent with those determined in batch tests at similar concentrations (approximately 1 mM) and much lower than values for sorption at much lower concentrations (nM to microM). These results show that U(VI) transport at high concentrations can be relatively fast at non-neutral pH, with negligible surface diffusion, because of weak sorption.     

Arsenite oxidation by a poorly crystalline manganese-oxide. 2. Results from X-ray absorption spectroscopy and X-ray diffraction

Arsenite (As(III)) oxidation by manganese oxides (Mn-oxides) serves to detoxify and, under many conditions, immobilize arsenic (As) by forming arsenate (As(V)). As(III) oxidation by Mn(IV)-oxides can be quite complex, involving many simultaneous forward reactions and subsequent back reactions. During As(III) oxidation by Mn-oxides, a reduction in oxidation rate is often observed, which is attributed to Mn-oxide surface passivation. X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) data show that Mn(II) sorption on a poorly crystalline hexagonal birnessite (δ-MnO?) is important in passivation early during reaction with As(III). Also, it appears that Mn(III) in the δ-MnO? structure is formed by conproportionation of sorbed Mn(II) and Mn(IV) in the mineral structure. The content of Mn(III) within the δ-MnO? structure appears to increase as the reaction proceeds. Binding of As(V) to δ-MnO? also changes as Mn(III) becomes more prominent in the δ-MnO ? structure. The data presented indicate that As(III) oxidation and As(V) sorption by poorly crystalline δ-MnO? is greatly affected by Mn oxidation state in the δ-MnO? structure.     

A longitudinal observational study of the dynamics of Mycoplasma bovis antibodies in naturally exposed and diseased dairy cows

Mycoplasma bovis is an important pathogen causing disease and substantial economic losses in cattle. However, knowledge of the dynamics of antibody responses in individual cows in the face of an outbreak is currently extremely limited. The use of commercial antibody tests to support clinical decision-making and for surveillance purposes is therefore challenging. Our objective was to describe the dynamics of M. bovis antibody responses in 4 Danish dairy herds experiencing an acute outbreak of M. bovis-associated disease, and to compare the antibody dynamics between dairy cows with different disease manifestations. A total of 120 cows were examined using a standardized clinical protocol and categorized into 4 disease groups: “mastitis,” “systemic,” “nonspecific,” and “none.” Paired blood and milk samples were collected and tested using a commercial M. bovis antibody–detecting ELISA. Plots of raw data and generalized additive mixed models with cow and herd as random effects were used to describe serum and milk antibody dynamics relative to the estimated time of onset of clinical disease. Cows with mastitis had high optical density measurement (ODC%) of antibodies in both milk and serum at disease onset. The estimated mean ODC% in milk was below the manufacturer's cut-off for the other groups for the entire study period. The estimated mean serum ODC% in the “systemic” group was high at onset of disease and stayed above the cut-off until 65 d after disease onset. However, the lower 95% confidence interval (CI) for the mean ODC% was only above the manufacturer's cut-off between 7 and 17 d after onset of disease. The CI of the “systemic” and “none” groups did not overlap at any time between the day of disease onset and 65 d after disease onset, and the estimated mean ODC% for both the “nonspecific” and “none” groups were generally below the cut-off for the majority of the study period. In conclusion, the serum antibody responses were highly dynamic and showed a high level of variation between individual cows. This strongly suggests that serology is unlikely to be useful for individual diagnosis of M. bovis-associated disease in dairy cows. However, it might still be useful for herd- or group-level diagnosis. Antibodies in milk were only increased in cows with M. bovis mastitis, indicating that milk antibody measurements only have diagnostic utility for cows with mastitis.