A model relating wearout to breakdown in thin oxides

A model has been developed relating wearout to breakdown in thin oxides. Wearout has been described in terms of trap generation inside of the oxide during high voltage stressing prior to breakdown. Breakdown occurred locally when the local density of traps exceeded a critical value and the product of the electric field and the higher leakage currents through the traps exceeded a critical energy density. The measurement techniques needed for determining the density of high-voltage stress generated traps have been described along with the method for coupling the wearout measurements to breakdown distributions. The average trap density immediately prior to breakdown was measured to be of the order of low-10¹⁹/cm³ in 10 nm thick oxides fabricated on p-type substrates stressed with negative gate voltages. The model has been used to describe several effects observed during measurements of time-dependent-dielectric-breakdown distributions. The area dependence of breakdown distributions, the differences in the breakdown distributions during constant current and constant voltage stressing, and the multi-modal distributions often observed were simulated using the model. The model contained the provision for incorporation of weak spots in the oxide     

Tower of London performance in relation to Magnetic Resonance Imaging following closed head injury in children.

To investigate the relationship of severity of pediatric closed head injury (CHI), the contribution of frontal lobe lesions, and age at testing (6–10 yr olds vs 11–15 yr olds) to cognitive deficit, 134 head-injured patients were given the Tower of London (TOL) task and underwent magnetic resonance imaging. 89 normal controls were given the TOL for comparison. Severity of CHI and age at testing were strongly related to cognitive performance on the TOL, including the frequency of breaking the rules. Volume of frontal lobe lesion (but not extrafrontal lesion) contributed to the prediction of perfomance on the TOL even after severity of injury was taken into account. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The promise of fuel cell-based automobiles

Fuel cell-based automobiles have gained attention in the last few years due to growing public concern about urban air pollution and consequent environmental problems. From an analysis of the power and energy requirements of a modern car, it is estimated that a base sustainable power ofca. 50 kW supplemented with short bursts up to 80 kW will suffice in most driving requirements. The energy demand depends greatly on driving characteristics but under normal usage is expected to be 200 Wh/km. The advantages and disadvantages of candidate fuel-cell systems and various fuels are considered together with the issue of whether the fuel should be converted directly in the fuel cell or should be reformed to hydrogen onboard the vehicle. For fuel cell vehicles to compete successfully with conventional internal-combustion engine vehicles, it appears that direct conversion fuel cells using probably hydrogen, but possibly methanol, are the only realistic contenders for road transportation applications. Among the available fuel cell technologies, polymer-electrolyte fuel cells directly fueled with hydrogen appear to be the best option for powering fuel cell vehicles as there is every prospect that these will exceed the performance of the internal-combustion engine vehicles but for their first cost. A target cost of $ 50/kW would be mandatory to make polymer-electrolyte fuel cells competitive with the internal combustion engines and can only be achieved with design changes that would substantially reduce the quantity of materials used. At present, prominent car manufacturers are deploying important research and development efforts to develop fuel cell vehicles and are projecting to start production by 2005.     

Family preservation using multisystemic therapy: An effective alternative to incarcerating serious juvenile offenders.

Multisystemic therapy (MST) delivered through a community mental health center was compared with usual services delivered by a Department of Youth Services in the treatment of 84 serious juvenile offenders and their multiproblem families. Offenders were assigned randomly to treatment conditions. Pretreatment and posttreatment assessment batteries evaluating family relations, peer relations, symptomatology, social competence, and self-reported delinquency were completed by the youth and a parent, and archival records were searched at 59 wks postreferral to obtain data on rearrest and incarceration. In comparison with youths who received usual services, youths who received MST had fewer arrests and self-reported offenses and spent an average of 10 fewer weeks incarcerated. In addition, families in the MST condition reported increased family cohesion and decreased youth aggression in peer relations. The relative effectiveness of MST was neither moderated by demographic characteristics nor mediated by psychosocial variables. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reactor modelling for electrochemical processes

This paper presents a relatively straightforward approach to the modelling of electrochemical reactors operated in batch or continuous modes. The models are based on ideal flow assumptions of either well-mixed or plug flow and incorporate reaction rate models based on electrochemical kinetics and mass transport at one electrode. General characteristics of the reactor models are described, particularly with regard to the need for good mass transport in metal recovery applications. An example is given on the use of the model in the recovery of a heavy metal (Cd²⁺) from an acidified solution containing Cd(II) and Fe(III) ions. The reaction rate model is based on experimental data.     

The mathematics of motif combination and their use for functional simulation

The concept of Motif Combination was introduced in the French Automotive industry's R&W standard. There has however been no formal mathematical theory for the technique of motif combination. This paper sets out to develop this theory. The main result of the paper is a set of four properties that the motif combination rules must satisfy in order to have certain desirable metrological properties.Motif methods may well provide useful techniques which complement rather than replace the traditional approach based on a mean line. It was found that many functional problems could be simulated very efficiently using motif methods. Examples of functional simulation via motif combination are illustrated in the paper.     

Preventing weight gain in adults: A pound of prevention.

Evaluated the feasibility and effectiveness of a program for weight gain prevention (WGP) in normal adults. 219 Ss were randomized to either WGP treatment or no treatment for 12 mo. The treatment group received monthly newsletters relating to weight management, participated in a financial incentive system, and were offered an optional 4-session education course in the 6th mo of the program. Results demonstrate high interest in WGP among Ss who were not objectively overweight. Participation, as measured by return of postcards sent with each newsletter, was approximately 75%. Results after 1 yr show a net weight loss of 1.8 lb in the group receiving the program compared with controls. 82% of participants maintained or lost weight, compared with 56% of controls. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Parallel branch-and-bound search in Parlog

The concurrent logic languages, of which Parlog is one, have been promoted as a new generation of software languages specifically designed for parallel programming. This paper investigates their application to a search problem commonly used as an illustration of artificial intelligence techniques, the 8-puzzle. It notes that programs written in the concurrent logic languages which do not pay attention to the parallelism can fall into two possible traps: either there is little real parallelism in them due to data dependencies, or there is too much parallelism and any practical architecture will be overwhelmed. A solution which controls the parallelism using user-defined priorities is proposed. This solution has the advantage of being architecture-independent.     

Stepwise-Graded Si3N4–SiC Ceramics with Improved Wear Properties

The processing of stepwise graded Si₃N₄/SiC ceramics by pressureless co-sintering is described. Here, SiC (high elastic modulus, high thermal expansion coefficient) forms the substrate and Si₃N₄ (low elastic modulus, low thermal expansion coefficient) forms the top contact surface, with a stepwise gradient in composition existing between the two over a depth of ∼1.7 mm. The resulting Si₃N₄ contact surface is fine-grained and dense, and it contains only 2 vol% yttrium aluminum garnet (YAG) additive. This graded ceramic shows resistance to cone-crack formation under Hertzian indentation, which is attributed to a combined effect of the elastic-modulus gradient and the compressive thermal-expansion-mismatch residual stress present at the contact surface. The presence of the residual stress is corroborated and quantified using Vickers indentation tests. The graded ceramic also possesses wear properties that are significantly improved compared with dense, monolithic Si₃N₄ containing 2 vol% YAG additive. The improved wear resistance is attributed solely to the large compressive stress present at the contact surface. A modification of the simple wear model by Lawn and co-workers is used to rationalize the wear results. Results from this work clearly show that the introduction of surface compressive residual stresses can significantly improve the wear resistance of polycrystalline ceramics, which may have important implications for the design of contact-damage-resistant ceramics.