Switching to Directional Antennas with Constant Increase in Radius and Hop Distance

For any angle α<2π, we show that any connected communication graph that is induced by a set P of n transceivers using omni-directional antennas of radius 1, can be replaced by a strongly connected communication graph, in which each transceiver in P is equipped with a directional antenna of angle α and radius r _dir, for some constant r _dir=r _dir(α). Moreover, the new communication graph is a c-spanner of the original graph, for some constant c=c(α), with respect to number of hops.     

Efficient fault-tolerant collision-free data aggregation scheduling for wireless sensor networks

This paper investigates the design of fault-tolerant TDMA-based data aggregation scheduling (DAS) protocols for wireless sensor networks (WSNs). DAS is a fundamental pattern of communication in wireless sensor networks where sensor nodes aggregate and relay data to a sink node. However, any such DAS protocol needs to be cognisant of the fact that crash failures can occur. We make the following contributions: (i) we identify a necessary condition to solve the DAS problem, (ii) we introduce a strong and weak version of the DAS problem, (iii) we show several impossibility results due to the crash failures, (iv) we develop a modular local algorithm that solves stabilising weak DAS and (v) we show, through simulations and an actual deployment on a small testbed, how specific instantiations of parameters can lead to the algorithm achieving very efficient stabilisation.     

Context matters: The structure of task goals affects accuracy in multiple-target visual search

Career visual searchers such as radiologists and airport security screeners strive to conduct accurate visual searches, but despite extensive training, errors still occur. A key difference between searches in radiology and airport security is the structure of the search task: Radiologists typically scan a certain number of medical images (fixed objective), and airport security screeners typically search X-rays for a specified time period (fixed duration). Might these structural differences affect accuracy? We compared performance on a search task administered either under constraints that approximated radiology or airport security. Some displays contained more than one target because the presence of multiple targets is an established source of errors for career searchers, and accuracy for additional targets tends to be especially sensitive to contextual conditions. Results indicate that participants searching within the fixed objective framework produced more multiple-target search errors; thus, adopting a fixed duration framework could improve accuracy for career searchers.     

Effect of Enameling on the Strength and Dynamic Fatigue of Soda–Lime–Silica Float Glass

The effect of a glass enamel coating on the strength and fatigue behavior of float glass was investigated. Commercially available enamel that was comprised of Cu₂Cr₂O₄ pigment particles in a bismuth-zinc borosilicate glass matrix was applied to a soda–lime–silica float glass via screen printing, followed by fusion at elevated temperature. Strengths of the enameled specimens were evaluated in biaxial flexure using a ring-on-ring (ROR) test geometry, and the data were analyzed using a conventional two-parameter Weibull distribution. Enameling was found to significantly degrade the strength of the float glass. There was no statistical difference in the characteristic strengths of samples enameled on the air side (66 MPa) compared with samples enameled on the tin side (61 MPa) of the float glass. Fractographic analysis revealed that the failures in the enameled float glass samples initiated at pores and pigment aggregates in the enamel, whereas failures in float glass samples initiated solely from surface flaws. Dynamic fatigue tests were performed on enameled float glass and indented float glass samples to determine the effect of the enamel on the stress corrosion behavior of the enameled components. There was no statistically significant difference between the stress corrosion exponents for the float glass and enameled float glass specimens.     

Structure–property relationships of poly(urethane urea)s with ultra‐low monol content poly(propylene glycol) soft segments. I. Influence of soft segment molecular weight and hard segment content

Structure–property relationships in poly(urethane urea)s synthesized with ultra‐low monol content poly(propylene glycol) soft segments were investigated as soft segment molecular weight (2000, 4000, and 8000 g/mol) and hard segment content (6.3 and 9.0 wt %) were varied. Morphological features such as interdomain spacing and interphase thickness were quantified and revealed with small‐angle X‐ray scattering (SAXS) and atomic force microscopy (AFM). The thermal and mechanical behavior was assessed with a dynamic mechanical analyzer (DMA) and by differential scanning calorimetry (DSC) and stress‐strain tests. Hard segment content, over the limited range studied, had little effect on the morphology and soft segment thermal and mechanical properties. The molecular weight of the soft segments had considerably more influence on the morphology and mechanical properties. Increasing soft segment molecular weight resulted in greater interdomain spacings, as shown by SAXS, and a noticeable change in the structure, as shown by AFM. Additionally, as soft segment molecular weight decreased the soft segment glass transition broadened and rose to higher temperatures. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 229–243, 2002; DOI 10.1002/app.10168     

A comparison of atomic force microscope friction and phase imaging for the characterization of an immiscible polystyrene/poly(methyl methacrylate) blend film

Three different forms of atomic force microscope (AFM) measurement, topography, friction force and phase imaging, have been used to investigate the surface morphology and local composition of an immiscible polystyrene (PS)/poly(methyl methacrylate) (PMMA) blend film. This sample forms discrete, micron-size domains in a continuous matrix, which is attributed to the segregation of PMMA in PS. When the samples were imaged in air, contrast in friction and phase images was caused by variations in sample topography only. When the samples were imaged under water, however, both friction and phase imaging yielded non-topographic contrast between domains. We ascribe the contrast in both of these imaging modes to preferential softening of the hydrophilic, PMMA-rich domains and to stronger tip-sample adhesive forces, highlighting the AFM's utility for probing local elastic properties and for compositional mapping of soft polymer samples.     

LoVis: Local Pattern Visualization for Model Refinement

Linear models are commonly used to identify trends in data. While it is an easy task to build linear models using pre‐selected variables, it is challenging to select the best variables from a large number of alternatives. Most metrics for selecting variables are global in nature, and thus not useful for identifying local patterns. In this work, we present an integrated framework with visual representations that allows the user to incrementally build and verify models in three model spaces that support local pattern discovery and summarization: model complementarity, model diversity, and model representivity. Visual representations are designed and implemented for each of the model spaces. Our visualizations enable the discovery of complementary variables, i.e., those that perform well in modeling different subsets of data points. They also support the isolation of local models based on a diversity measure. Furthermore, the system integrates a hierarchical representation to identify the outlier local trends and the local trends that share similar directions in the model space. A case study on financial risk analysis is discussed, followed by a user study.     

Fear Appeals,Message Processing Cues,and Credibility in the Websites of Violent,Ideological, and Nonideological Groups

Ideological groups use the Internet to deliver their messages unhindered by the constraints of traditional media. We examined how ideological groups promote their worldview through their websites. Using the elaboration likelihood model (ELM), this research used trained coders to examine the websites of nonideological groups (n = 37), nonviolent ideological groups (n = 36), and violent ideological groups (n = 32) for credibility, persuasion processing cues, and interactivity factors. Results of this study found that the websites of violent ideological groups use more fear appeals, were less interactive, and were the least credible of the 3 groups. All 3 groups used more central cues than peripheral suggesting they focused on evidence for their arguments rather than emotion.     

Catalytic and inhibitory effects of dissolved Cd2+ on C3H8 electro-oxidation

Studies have been made of the effect of Cd²⁺ on the oxidation rate of C₃H₈ in 80% H₃PO₄ at 130 C on platinized Pt electrodes.Dissolved Cd²⁺ discharges, probably as Cd⁰, and forms a stable sub-monolayer on a Pt electrode at potentials as high as 0·5 V versus RHE. Although this Cd⁰ layer is apparently substantially desorbed in favor of adsorbed hydrocarbon, C₃H₈ adsorption is inhibited in its presence. C₃H₈ oxidation is also inhibited. However, the C₃H₈ oxidation rate is observed to increase under some circumstances, and this appears to be because Cd isabsorbed into the Pt lattice. Co-plating of Cd and Pt leads to an electrode which, once the excess Cd has been removed, appears to be stable, and which catalyses C₃H₈ oxidation by about a factor of three at 0·25 V. Above 0·3 V, this absorbed Cd somewhat inhibits C₃H₈ oxidation.     

Electrocatalyst materials for fuel cells based on the polyoxometalates—K7 or H7[(P2W17O61)Fe(H2O)] and Na12 or H12[(P2W15O56)2Fe4(H2O)2]

Free acids of the iron substituted heteropoly acids (HPA), H₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (HFe1) and H₁₈[(P₂W₁₅O₅₆)₂Fe^III₂(H₂O)₂] (HFe2) were prepared from the salts K₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (KFe1) and Na₁₂[(P₂W₁₅O₅₆)₂Fe^III₄(H₂O)₂] (NaFe4), respectively. The iron-substituted HPA were adsorbed on to XC-72 carbon based GDLs to form HPA doped GDEs after water washing with HPA loadings of ca. 1 μmol. The HPA was detected throughout the GDL by EDX. Solution electrochemistry of the free acids are reported for the first time in sulfate buffer, pH 1-3. The hydrogen oxidation reaction was catalyzed by KFe1 at 0.33 V, with an exchange current density of 38 mA/cm². Moderate activity for the oxygen reduction reaction was observed for the iron substituted HPA, which was dramatically improved by selectively removing oxygen atoms from the HPA by cycling the fuel cell cathode under N₂ followed by reoxidation to give a restructured oxide catalyst. The nanostructured oxide achieved an OCV of 0.7 V with a Tafel slope of 115 mV/decade. Cycling the same catalysts in oxygen resulted in an improved catalyst/ionomer/carbon configuration with a slightly higher Tafel slope, 128 mV/decade but a respectable current density of 100 mA/cm² at 0.2 V.