Emergence of photoluminescence on bulk MoS<Subscript>2</Subscript> by laser thinning and gold particle decoration

We demonstrate a facile and effective approach to significantly improve the photoluminescence of bulk MoS₂ via laser thinning followed by gold particle decoration. Upon laser thinning of exfoliated bulk MoS₂, photoluminescence emerges from the laser-thinned region. After further treatment with an AuCl₃ solution, gold particles self-assemble on the laser-thinned region and thick edges, further increasing the fluorescence of bulk MoS₂ 28 times and the Raman response 3 times. Such fluorescence enhancement can be attributed to both surface plasmon resonance and p-type doping induced by gold particles. The combination of laser thinning and AuCl₃ treatment enables the functionalization of bulk MoS₂ for optoelectronic applications. It can also provide a viable strategy for mask-free and area-selective p-type doping on single MoS₂ flakes.

Open image in new window

     

Investigation of charge carrier depletion in freestanding nanowires by a multi-probe scanning tunneling microscope

Profiling of the electrical properties of nanowires (NWs) and NW heterocontacts with high spatial resolution is a challenge for any application and advanced NW device development. For appropriate NW analysis, we have established a four-point prober, which is combined in vacuo with a state-of-the-art vapor-liquid-solid preparation, enabling contamination-free NW characterization with high spatial resolution. With this ultrahigh-vacuum-based multi-tip scanning tunneling microscopy (MT-STM), we obtained the resistance and doping profiles of freestanding NWs, along with surface-sensitive information. Our in-system 4-probe STM approach decreased the detection limit for low dopant concentrations to the depleted case in upright standing NWs, while increasing the spatial resolution and considering radial depletion regions, which may originate from surface changes. Accordingly, the surface potential of oxide-free GaAs NW {112} facets has been estimated to be lower than 20 mV, indicating a NW surface with very low surface state density.

Open image in new window

     

Patch layout from feature graphs

The structuring of surface meshes is a labor intensive task in reverse engineering. For example, in CAD, scanned triangle meshes must be divided into characteristic/uniform patches to enable conversion into high-level spline surfaces. Typical industrial techniques, like rolling ball blends, are very labor intensive.We provide a novel, robust and quick algorithm for the automatic generation of a patch layout based on a topology consistent feature graph. The graph separates the surface along feature lines into functional and geometric building blocks. Our algorithm then thickens the edges of the feature graph and forms new regions with low varying curvature. Further, these new regions-so-called fillets and node patches-will have highly smooth boundary curves, making the algorithm an ideal preprocessor for a subsequent spline fitting algorithm.     

Betweenness parameterized above tight lower bound

We study ordinal embedding relaxations in the realm of parameterized complexity. We prove the existence of a quadratic kernel for the Betweenness problem parameterized above its tight lower bound, which is stated as follows. For a set V of variables and set C of constraints “vi is between vj and vk”, decide whether there is a bijection from V to the set {1,…,|V|} satisfying at least |C|/3+κ of the constraints in C. Our result solves an open problem attributed to Benny Chor in Niedermeier's monograph “Invitation to Fixed-Parameter Algorithms”. The betweenness problem is of interest in molecular biology. An approach developed in this paper can be used to determine parameterized complexity of a number of other optimization problems on permutations parameterized above or below tight bounds.     

Visualizing and fuzzy filtering for discovering temporal trajectories of association rules

We propose a user-centric rule filtering method that allows to identify association rules that exhibit a certain user-specified temporal behavior with respect to rule evaluation measures. The method can considerably reduce the number of association rules that have to be assessed manually after a rule induction. This is especially necessary if the rule set contains many rules as it is the case for the task of finding rare patterns inside the data. For the proposed method, we will reuse former work on the visualization of association rules [M. Steinbrecher, R. Kruse, Visualization of possibilistic potentials, in: Foundations of Fuzzy Logic and Soft Computing, in: Lecture Notes in Comput. Sci., vol. 4529, Springer-Verlag, Berlin/Heidelberg, 2007, pp. 295–303] and use an extension of it to motivate and assess the presented filtering technique. We put the focus on rules that are induced from a data set that contains a temporal variable and build our approach on the requirement that temporally ordered sets of association rules are available, i.e., one set for every time frame. To illustrate this, we propose an ad-hoc learning method along the way. The actual rule filtering is accomplished by means of fuzzy concepts. These concepts use linguistic variables to partition rule-related domains of interest, such as the confidence change rate. The original rule sets are then matched against these user concepts and result in only those rules that match the respective concepts to a predefined extent. We provide empirical evidence by applying the proposed methods to hand-crafted as well as real-world data sets and critically discuss the current state and further prospects.     

Influence of a chip scale package on the frequency response of a MEMS microphone

This paper describes the influence of a chip scale MEMS package (CSMP) on the acoustic behaviour of a silicon microphone. The influence was calculated using an electro-mechanical–acoustical equivalent circuit. Standard packaging of microphones using die bonding and wire bonding leads to a large front volume which acts as a Helmholtz resonator. This can dramatically influence the frequency response of the microphone system by adding a second resonance. In the worst case this second resonance is in the acoustic frequency range, thus degrading its performance in an unacceptable way. In case of the CSMP only a small front volume is generated between the substrate and the flip-chipped microphone chip. Thus the resonance step-up is very small compared to standard packages. Furthermore the frequency response can be flattened by optimizing the geometry of the small sound holes in the substrate. By choosing an appropriate geometry of these sound holes the package can act as a low pass filter where the cut-off frequency can be placed to the desired value of the acoustic spectrum.     

Study on the replication quality of micro-structures in the injection molding process with dynamical tool tempering systems

The injection molding of micro-structures is a promising mass-production method for a broad range of materials. However, the replication quality of these structures depends significantly on the heat flow during the filling stage. In this paper, the filling and heat transfer of v-groove and random structures below 5 μm is investigated with the help of an AFM (atomic force microscope) and thermo couples. A numerical model is developed to predict the filling of surface structures during the filling and packing stage. The model implies the use of simple fully developed flow models taking the power-law material model into account. This permits investigation into which ways several processing parameters affect the polymer flow in the surface structures. The mold wall temperature, which has significant effects on the polymer flow, is varied by using a variothermal mold temperature control system to validate the model proposed.