High dynamic range temperature point sensor using greenfluorescence intensity ratio in erbium-doped silica fiber

We propose a sensor based on the temperature dependant behavior of the two lines of green emission of the erbium ion. The ratio of the intensities of these two lines presents a very low dependance on pump wavelength and pump power fluctuations. The sensitivity of the ratio is 0.013/°C between room temperature and 600°C. In addition, the measurement is self-calibrated     

Mécanisme de l’évolution des champs électromagnétiques dans un simulateur de grandes dimensions. Projet d’un simulateur semi-rhombique

The purpose of this paper is to evaluate theoretically and experimentally the transient electric field in anemp simulator. Using a time domain analysis, the mechanism of the field deformation can be analysed and consequently modifications can be introduced in the conception of new simulators (for example: rhombic simulator).     

Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications

Rare-earth zirconates have been identified as a class of low-thermal-conductivity ceramics for possible use in thermal barrier coatings (TBCs) for gas-turbine engine applications. To document and compare the thermal conductivities of important rare-earth zirconates, we have measured the thermal conductivities of the following hot-pressed ceramics: (i) Gd₂Zr₂O₇ (pyrochlore phase), (ii) Gd₂Zr₂O₇ (fluorite phase), (iii) Gd_2.58Zr_1.57O₇ (fluorite phase), (iv) Nd₂Zr₂O₇ (pyrochlore phase), and (v) Sm₂Zr₂O₇ (pyrochlore phase). We have also measured the thermal conductivity of pressureless-sintered 7 wt% yttria-stabilized zirconia (7YSZ)—the commonly used composition in current TBCs. All rare-earth zirconates investigated here showed nearly identical thermal conductivities, all of which were ∼30% lower than the thermal conductivity of 7YSZ in the temperature range 25°–700°C. This finding is discussed qualitatively with reference to thermal-conductivity theory.     

Zinc Coated Steel/Epoxy Adhesive Systems: Investigation of the Interfacial Zone by FTIR Spectroscopy

The present study takes advantage of the ability of Fourier Transform Infrared Spectroscopy (FTIR) for the analysis of ultrathin organic films on metals. FTIR in the reflection mode (IRRAS) is used in order to study the interaction of ultrathin films of dicyandiamide (hardener of most one-pack epoxy resins) with various substrates, model ones such as gold or zinc and industrial ones such as steel and zinc-coated steels.

Pure zinc surfaces and, to a lesser extent, zinc-coated steels are shown to react with dicyandiamide after heating at 180°C, as evidenced by the frequency shift of the absorption band (at about 2200 cm^-1) characteristic for nitrile groups. As real systems consist of thick layers of a fully formulated adhesive cured onto a metallic substrate, the direct investigation of such a buried interphase is no longer possible by FTIR and by most of the known spectroscopies. Some mechanically tested specimens are then analysed, after failure, by FTIR microspectrometry. The spectra obtained, corresponding to the fracture initiation zone which is about 100 μm in diameter, advocate for the presence of an ultrathin layer of modified polymer still covering the substrate.     

Rheological behaviour of polysaccharide aqueous solutions

Several data relative to the viscosity of water-soluble polysaccharide solutions were collected from the literature and processed by different rheological models. Some relationships between the viscosity of these polymer solutions, their molecular weight and their solution concentrations, were established and their validity checked. Thus, an accurate equation correlating the viscosity and both the shear rate and the solution concentration of different water soluble polysaccharides (xanthan, hyaluronan, carboxymethylcellulose) was deduced on the basis of Cross' model which suggests two domains in which the viscosity is constant, i.e. very low and very high shear rate ranges. Then, an expression relating the zero-shear viscosity (A) and the concentration of their solutions was proposed. Finally, an alternative equation to that of Mark–Houwink correlating the molecular weight and the intrinsic viscosity of the water-soluble polysaccharides studied in this paper was found.     

Polychromatic Dyeing

The history and development of the ICI polychromatic dyeing process are outlineed The basic mechanics of the process and the applicator and its essential principles are described. The factors governing the control and reproduction of patterns are described, together with dye-fixation procedures. Reference is made to several important applications of this coloration technique, which is also compared with conventional pad-dyeing and textile-printing methods.     

An embedding approach for the design of state‐feedback tracking controllers for references with jumps

We study the problem of designing state‐feedback controllers to track time‐varying state trajectories that may exhibit jumps. Both plants and controllers considered are modeled as hybrid dynamical systems, which are systems with both continuous and discrete dynamics, given in terms of a flow set, a flow map, a jump set, and a jump map. Using recently developed tools for the study of stability in hybrid systems, we recast the tracking problem as the task of asymptotically stabilizing a set, the tracking set, and derive conditions for the design of state‐feedback tracking controllers with the property that the jump times of the plant coincide with those of the given reference trajectories. The resulting tracking controllers guarantee that solutions of the plant starting close to the reference trajectory stay close to it and that the difference between each solution of the controlled plant and the reference trajectory converges to zero asymptotically. Constructive conditions for tracking control design in terms of LMIs are proposed for a class of hybrid systems with linear maps and input‐triggered jumps. The results are illustrated by various examples. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

The Effect of Sulfur Segregation on the Adherence of the Thermally-Grown Oxide on NiAl—I: Sulfur Segregation on the Metallic Surface of NiAl(001) Single-Crystals and at NiAl(001)/Al2O3 Interfaces

The aim of this study was to improve the understanding of the deleterious effect of sulfur impurities on the adherence of the thermally-grown oxide on the boundary layer in thermal-barrier-coating systems. In Part I, the sulfur segregation on the free surface of NiAl(001) and at different interfaces between metal and transient alumina scales has been characterized by AES, XPS and LEED. The sulfur diffusion coefficient in the alloy has been determined (D = 0.15 exp(–218,000/RT) cm²/s). It is by three orders of magnitude larger than the nickel and aluminum self-diffusion coefficients. It has also been observed that the sulfur de-segregates upon Al enrichment of the metallic surface. The saturation of the metallic surface with an amorphous alumina layer formed at room temperature blocks the segregation of S. However, in the initial stages of oxidation where the transient -alumina grows by cationic transport and inject vacancies at the interface, S segregates at the interface between the alumina thin films and the metallic substrate.     

The damping performance of aluminum-based composites

Metal-matrix composites may offer better damping properties than unreinforced alloys. Because damping properties (and metal-matrix composites) are becoming important in airframe design, the damping capabilities of a number of aluminum-matrix composites were measured over a wide range of frequencies at low strain amplitudes, using a new laser vibrometer technique. Silicon carbide and alumina reinforcements resulted in a material with damping properties similar to that of unreinforced aluminum 6061-T6, but unidirectional and planar-random graphite continuous-fiber reinforcements increased the damping by 5 and 14 times, respectively. The increased damping of the continuous fiber composites is attributed to the absence of interfacial reaction resulting from the high-pressure infiltration method used for their manufacture.