Geographical origin classification of olive oils by PTR-MS

The volatile compositions of 192 olive oil samples from five different European countries were investigated by PTR-MS sample headspace analysis. The mass spectra of all samples showed many masses with high abundances, indicating the complex VOC composition of olive oil. Three different PLS-DA models were fitted to the data to classify samples into ‘country’, ‘region’ and ‘district’ of origin, respectively. Correct classification rates were assessed by cross-validation. The first fitted model produced an 86% success rate in classifying the samples into their country of origin. The second model, which was fitted to the Italian oils only, also demonstrated satisfactory results, with 74% of samples successfully classified into region of origin. The third model, classifying the Italian samples into district of origin, yielded a success rate of only 52%. This lower success rate might be due to either the small class set, or to genuine similarities between olive oil VOC compositions on this tight scale.     

Downhole Upgrading of Extra-heavy Crude Oil Using Hydrogen Donors and Methane Under Steam Injection Conditions

An extra-heavy crude oil underground upgrading process is described which involves the downhole addition of a hydrogen donor additive under steam injection conditions (280-315°C and residence times of at least 24-h). Laboratory experiments showed a 4° increase in the API gravity (from 9 to 12°) of the upgraded product, a two-fold reduction in the viscosity and, an approximately 8% decrease in the asphaltene content with respect to the original crude. Further increases on the temperature led to products with improved properties reaching 15°API at 315°C. It was found that the presence of the natural formation (catalysts) and methane (natural gas) is necessary to enhance the properties of the upgraded crude oil. From GC and GC-MS results a reaction pathway is proposed that involves hydrogen transfers from tetralin to the extra-heavy crude oil resulting in the formation of 1,2-dihydronaphthalene. This compound is then transformed into naphthalene, further upgrading of crude oil through hydrogen donation. The results of the experiments carried out in the presence and absence of the mineral formation and with an inert solid (SiC) strongly indicate that the former acts as a catalyst and not as a heat transfer matrix. Isotopic labeling studies (CD₄ and ¹³CH₄) give evidences that, most probably, methane is involved in the upgrading reactions.     

Thermal performance testing of flat-plate collectors

Existing standards for testing the performance of flat-plate solar collectors are documented in ASHRAE 93 [ANSI/ASHRAE Standard 93-2003, 2003. Methods of Testing to Determine Thermal Performance of Solar Collectors, ISSN: 1041-2336, ASHRAE, Inc., 1791 Tullie Circle, Ne, Atlanta, GA30329], ISO 9806-1 [ISO Standard 9806-1:1994(E), 1994. Test Methods for Solar Collectors – Part 1: Thermal Performance of Glazed Liquid Heating Collectors Including Pressure Drop, ISO, Case Postale 56, CH-1211 Geneve 20, Switzerland] and EN12975-2 [European Standard EN12975-2:2001, 2001. Thermal Solar Systems and Components – Solar Collectors – Part 2: Test Methods, CEN, Rue de Stasart, 36, B-1050, Brussels]. The ASHRAE 93 standard requires an experimental determination of the steady-state collector efficiency under prescribed environmental conditions for a range of collector fluid temperatures. Each test requires a minimum of 20 min and 22 tests are required to fully characterize a collector’s thermal performance. The ASHRAE 93 testing procedure is further complicated by the fact that the prescribed weather conditions do not often occur in some locations, which prolongs the time required to conduct the performance tests for a given collector. The EN12975-2 collector test procedure provides an alternative transient test method that can be conducted over a larger range of environmental conditions. This paper compares the results obtained by applying the EN12975-2 standard with results obtained from the ASHRAE 93 steady-state tests for a well-designed single-glazed selective surface flat-plate collector. The collector thermal parameters, F_R(τα)_e and F_RU_L obtained by the two test methods show good agreement. The incident angle modifier coefficient determined in the ASHRAE method, which uses a separate test for this purpose, was found to be more accurate than that determined in the transient method according to the EN12975-2 standard, which obtains this value and all other collector parameters in the same step. This transient method, however, uses a refined collector model that includes specific terms for the wind speed dependence and the collector thermal capacitance, which are absent in the ASHRAE model. The long-term collector thermal performance as a part of a water heating system was simulated using the efficiency curves derived from each of the test methods. The solar fractions obtained by simulation are within 7% for both cases.     

Mesostructured Thin Films as Responsive Optical Coatings of Photonic Crystals

A synthetic route is presented to attain high‐optical‐quality multilayered structures that result from coupling ordered mesoporous titanium oxide thin films to the surface of a dense one‐dimensional photonic crystal. Such architectures present spectrally well‐defined photon resonant modes localized in the outer coating that finely respond to physicochemically induced modifications of its pore volume. The potential of these porous coatings in detection of environmental changes through variations of the photonic response of the ensemble is demonstrated by performing isothermal optical reflectance measurements under controlled vapor‐pressure conditions.     

Rheological properties of pectin-enriched products isolated from butternut (Cucurbita moschata Duch ex Poiret)

Rheological behavior of five different pectin-enriched products obtained from a cell wall enriched powder of butternut (Cucurbita moschata Duch ex Poiret) was evaluated through flow and oscillatory assays. The product SE was obtained through treatment with citrate buffer; C1 and C2 were obtained using cellulase and different enzyme-substrate ratios while H1 and H2 resulted from hemicellulase treatment at different levels. SE- and H1-pectin-enriched fractions showed the best performance as thickeners as indicated by their highest Newtonian viscosities and time constants on shear-thinning along the flow. These fractions showed a structure with the highest density of interactions between the hydrated macromolecules when solutions were evaluated at rest. Fractions obtained with a higher activity of hemicellulase (H2) or with the lowest activity of cellulase assayed (C1) showed the same degree of structure when evaluated at rest, while C2-fraction presented the lowest density of macromolecular interactions in water, behaving as a diluted hydrocolloid solution as confirmed by its fitting to the Cox-Merz rule. Molecular weight distribution of polysaccharide fractions along with chemical composition helped to explain the rheological behavior of these isolated fractions which contained between 39 and 78 g of galacturonic acid per 100 g of product. With the exception of C2 fraction, pectin-enriched products isolated from butternut showed an interesting range of thickening properties and can be used as thickeners in the food industry.     

“Tropicalisation” of Feed-in Tariffs: A custom-made support scheme for hybrid PV/diesel systems in isolated regions

The interest and actions towards introducing renewables for off-grid regions has increased due to their ostensible cost-effectiveness, eco-friendliness and quality services provided. Nevertheless, in many isolated areas diesel generators appear as a common option, confirming that there is a need for financial support mechanisms that aid the introduction of renewables due to their higher initial investment costs.This paper proposes a so-called ‘tropicalisation’ of the Feed-in Tariff scheme to promote the introduction of hybrid systems in isolated communities based on the idea of awarding for each kWh produced by renewable energies a premium value during a guaranteed period of time. The proposed Renewable Energy Premium Tariff (RPT) scheme is an alternative mechanism to the usual initial investment donation for off-grid energy development projects by recognising the production of renewable electricity and opting for a long-term sustainability of the projects. Ecuador presents ideal conditions to study the introduction of such a ‘tropicalised’ scheme since a Feed-in Law including off-grid projects was established in 2002 and since there are governmental and local efforts for the introduction of renewable hybrids in isolated regions.Modelling of the introduction of photovoltaics (PVs) into diesel systems for several mini-grids located in isolated regions of Ecuador has been performed, and included a detailed financial analysis for optimisation of RPT values and a comparison with existing stand-alone diesel systems. The results show the cost-effectiveness of PV/diesel hybrids over diesel gensets, taking into account present and future diesel prices. To obtain long-term sustainability of the project, the RPT values are set at 0.70–1.20$ kWh covering the operability of the whole system for 20 years, where the renewable fraction should have the largest share in the hybrid system. The proposed mechanism is expected to aid the introduction of renewable technologies to bring solutions and sustainable energy options to final users of off-grid isolated regions.     

3D sound interactive environments for blind children problem solving skills

Audio-based virtual environments have been increasingly used to foster cognitive and learning skills. A number of studies have also highlighted that the use of technology can help learners to develop effective skills such as motivation and self-esteem. This study presents the design and usability of 3D interactive environments for children with visual disabilities to help them solve problems in Chilean geography and culture. We introduce AudioChile, a virtual environment that can be navigated through 3D sound to enhance spatiality and immersion throughout the environment. 3D sound is used to orientate, avoid obstacles, and identify the positions of various characters and objects within the environment. We have found during the usability evaluation that sound can be fundamental for attention and motivation purposes during interaction. Learners identified and clearly discriminated environmental sounds to solve everyday problems, spatial orientation, and laterality.     

How the free limbs are used by elite high jumpers in generating vertical velocity

The aim of this study was to quantify how elite high jumpers used their free limbs in a competitive high jump and to estimate the contribution that these made to vertical take-off velocity. This was achieved by analysing the competitive performances of six elite male high jumpers using 3D motion analysis and assessing limb function using the relative momentum method. The mean peak relative momentum of the arm nearest to the bar at take-off was 9.4 kg m s(-1), while that of the arm furthest away from the bar was 11.3 kg m s(-1) and these did not differ significantly. The free (lead) leg reached a mean peak relative momentum of 20.9 kg m s(-1). At touch-down the free leg had a large positive relative momentum that was offset by the negative relative momentum of the arms, although their combined value still remained positive. The mean combined free limbs' relative momentum at touch-down was 13.8 kg m s(-1) and reached a peak of 37.6 kg m s(-1). The difference between these two values amounted to 7.1 % of whole-body momentum, which was judged to be the amount by which the free limbs contributed to performance. The arms had a greater influence on performance than had the lead leg. This was because the lead leg increased its relative momentum little during the contact period while the arms had an initial negative value that increased markedly after touch-down. The compressive force exerted by the motion of the free limbs, estimated by the change in the combined free limbs' relative momentum, reached a mean peak of 366 N and was greatest at 37% of the contact period. It was concluded that to maximize the contribution the free limbs can make to performance, given the restraints imposed on technique by other performance requirements, the arms should have a vigorous downward motion at touch-down to make the most use of the high (but little changing) relative momentum of the lead leg.     

Tuberculin reactivity in the elderly. Comparison of PPD-RT23 and PPD-CT68

BACKGROUND: Tuberculin reactivity varies on the basis of the PPD lot and the population studied. AIMS: To compare tuberculin reactivity in the elderly following successive applications of PPD from 2 different lots. POPULATION: Elderly nursing-home residents, from the province of Guadalajara, Spain. METHODS: The elderly were randomly selected and administered with a first Mantoux intradermoreaction of 2 UT of PPD-RT23 or 2 UT of PPD-CT68. The study was performed in a scaled basis, eliminating the reactors (transversal induration > or = 5 mm at 72 h). The non reactors were restudied with a second and third test in alternative arms at a 7-day interval with the same lot and initial dosis of PPD. At one year the scaled study was repeated with 2 UT of PPD-CT68. RESULTS: Eight hundred and thirty elderly persons (79 +/- 9 years) were studied, with 410 receiving PPD-RT23 and 420 receiving PPD-CT68. No differences were observed in the percentage of initial reactors (31% vs 29%; p = 0.26) or in the booster reactors (23% vs 20%; p = 0.16). The PPD-RT23 was found to trigger more intensive reactions than the PPD-CT68 leading to a greater frequency of indurations > 14 mm. After one year, the percentage of stable reactions was similar in both groups (50.5% vs 49.5%; NS). CONCLUSIONS: 1) In elderly nursing-home residents 2 UT of PPD-RT23 and 2 UT of PPD-CT68 showed similar results in regard to the number of reactors and the frequency of booster reactions. 2) The proportion of intense reactions was greater with 2 UT of PPD-RT23 than with 2 UT of PPD-CT68. 3) The stability of the reactions at one year was independent of the lot used in the first phase.