Rheological properties of pectin-enriched products isolated from butternut (Cucurbita moschata Duch ex Poiret)

Rheological behavior of five different pectin-enriched products obtained from a cell wall enriched powder of butternut (Cucurbita moschata Duch ex Poiret) was evaluated through flow and oscillatory assays. The product SE was obtained through treatment with citrate buffer; C1 and C2 were obtained using cellulase and different enzyme-substrate ratios while H1 and H2 resulted from hemicellulase treatment at different levels. SE- and H1-pectin-enriched fractions showed the best performance as thickeners as indicated by their highest Newtonian viscosities and time constants on shear-thinning along the flow. These fractions showed a structure with the highest density of interactions between the hydrated macromolecules when solutions were evaluated at rest. Fractions obtained with a higher activity of hemicellulase (H2) or with the lowest activity of cellulase assayed (C1) showed the same degree of structure when evaluated at rest, while C2-fraction presented the lowest density of macromolecular interactions in water, behaving as a diluted hydrocolloid solution as confirmed by its fitting to the Cox-Merz rule. Molecular weight distribution of polysaccharide fractions along with chemical composition helped to explain the rheological behavior of these isolated fractions which contained between 39 and 78 g of galacturonic acid per 100 g of product. With the exception of C2 fraction, pectin-enriched products isolated from butternut showed an interesting range of thickening properties and can be used as thickeners in the food industry.     

“Tropicalisation” of Feed-in Tariffs: A custom-made support scheme for hybrid PV/diesel systems in isolated regions

The interest and actions towards introducing renewables for off-grid regions has increased due to their ostensible cost-effectiveness, eco-friendliness and quality services provided. Nevertheless, in many isolated areas diesel generators appear as a common option, confirming that there is a need for financial support mechanisms that aid the introduction of renewables due to their higher initial investment costs.This paper proposes a so-called ‘tropicalisation’ of the Feed-in Tariff scheme to promote the introduction of hybrid systems in isolated communities based on the idea of awarding for each kWh produced by renewable energies a premium value during a guaranteed period of time. The proposed Renewable Energy Premium Tariff (RPT) scheme is an alternative mechanism to the usual initial investment donation for off-grid energy development projects by recognising the production of renewable electricity and opting for a long-term sustainability of the projects. Ecuador presents ideal conditions to study the introduction of such a ‘tropicalised’ scheme since a Feed-in Law including off-grid projects was established in 2002 and since there are governmental and local efforts for the introduction of renewable hybrids in isolated regions.Modelling of the introduction of photovoltaics (PVs) into diesel systems for several mini-grids located in isolated regions of Ecuador has been performed, and included a detailed financial analysis for optimisation of RPT values and a comparison with existing stand-alone diesel systems. The results show the cost-effectiveness of PV/diesel hybrids over diesel gensets, taking into account present and future diesel prices. To obtain long-term sustainability of the project, the RPT values are set at 0.70–1.20$ kWh covering the operability of the whole system for 20 years, where the renewable fraction should have the largest share in the hybrid system. The proposed mechanism is expected to aid the introduction of renewable technologies to bring solutions and sustainable energy options to final users of off-grid isolated regions.     

Two-Step Processing Method for Blending High-Performance Polymers with Notable Thermal and Rheological Differences: PEI and PBT

Blends between high-performance polymers (HPP) are barely studied, especially those produced by melting processing. In this work, it is proposed a novel methodology to prepare blends between polymers with notable processing temperature differences: poly(ether imide) (PEI) and poly(butylene terephthalate) (PBT). Processing parameters are settled after thermal and rheological evaluation of pure materials, those results suggest these blends need to be produced by steps. It is found a synergistic effect such as lowering PEI processing temperature and reducing PBT hydrolysis at high temperatures. Propose methodology allows to produce blends between HPP in the whole composition range with the same processing conditions.     

Influence of carbonate intercalation in the surface-charging behavior of Zn–Cr layered double hydroxides

The influence of interlayer composition in the surface charge and reactivity of layered double hydroxides (LDHs) has been explored. With this purpose, a chloride-intercalated Zn–Cr-LDH has been synthesized by the constant pH coprecipitation method and afterwards exchanged with carbonate to obtain solids with different Cl^?/CO₃^2? ratios. The solids structure has been characterized by elemental chemical analysis, powder X-ray diffraction and infrared spectroscopy, while its surface-charging behavior and reactivity have been studied by acid–base potentiometric titrations and electrophoretic mobility determinations. The chloride-intercalated sample shows an increasing hydroxyl adsorption with increasing pH and decreasing support electrolyte concentration and the particles present positive electrophoretic mobility in the measured pH range. As carbonate content increases in the samples, the total OH^? uptake diminishes and the samples show an isoelectric point at pH around 10. When the gallery is totally occupied by carbonate anions, the OH uptake vs. pH curves registered at different electrolyte concentrations merge at around pH 10. A LDH–water interface model has been used to give an interpretation to the experimental data. The model indicates that as carbonate content increases, the sample behavior becomes similar to that of a metal (hydr)oxide and that surface (bi)carbonate anions undergo acid–base reactions.     

Role of perfluorosulfonic ionomer as protective agent against strong adsorption of (bi)sulfate anions. Relevance in the determination of the area of Pt/C electrocatalysts

This work aims to shed light on the wide dispersion of the values of the area of Pt/C electrodes reported when evaluated by means of the thin-film electrode approach. The effect of the Perfluorosulfonic Ionomer (PFSI) content of the electrodes and the nature of the electrolyte are discussed. The results disclose that the area of the Pt electrodes evaluated by electrochemical techniques is related to the actual PFSI content on the electrode and to the nature of the electrolyte. Using HClO₄ as electrolyte, electrode area values are independent of the PFSI content. On the contrary, if experiments are recorded in H₂SO₄, the electrode area value increases with the increasing PFSI content, irrespectively of the Pt loading. Such effect is ascribed to the interaction of the sulfonic groups from the PFSI with the surface of the Pt nanoparticles, avoiding the strong adsorption of the bisulfate anions.     

3D sound interactive environments for blind children problem solving skills

Audio-based virtual environments have been increasingly used to foster cognitive and learning skills. A number of studies have also highlighted that the use of technology can help learners to develop effective skills such as motivation and self-esteem. This study presents the design and usability of 3D interactive environments for children with visual disabilities to help them solve problems in Chilean geography and culture. We introduce AudioChile, a virtual environment that can be navigated through 3D sound to enhance spatiality and immersion throughout the environment. 3D sound is used to orientate, avoid obstacles, and identify the positions of various characters and objects within the environment. We have found during the usability evaluation that sound can be fundamental for attention and motivation purposes during interaction. Learners identified and clearly discriminated environmental sounds to solve everyday problems, spatial orientation, and laterality.     

A framework to visualize equivalences between computational models of regular languages

We discuss how to increase and simplify the understanding of the equivalence relations between machine models and/or language representations of formal languages by means of the animation tool SAGEMoLiC. Our new educational tool permits the simulation of the execution of models of computation, as many other animation systems do, but its philosophy goes further than these of the usual systems since it allows for a true visualization of the key notions involved in the formal proofs of these equivalences. In contrast with the proposal of previous systems, our approach to visualize equivalence theorems is not a simple “step by step animation” of specific conversion algorithms between computational models and/or grammatical representations of formal languages, because we make emphasis on the key theoretical notions involved in the formal proofs of these equivalences.