Reduced Impact of Induced Gate Noise on Inductively Degenerated LNAs in Deep Submicron CMOS Technologies

Designers of radio-frequency inductively-degenerated CMOS low-noise-amplifiers have usually not followed the guidelines for achieving minimum noise figure. Nonetheless, state-of-the-art implementations display noise figure values very close to the theoretical minimum. In this paper, we point out that this is due to the effect of the parasitic overlap capacitances in the MOS device. In particular, we show that overlap capacitances lead to a significant induced-gate-noise reduction, especially when deep sub-micron CMOS processes are used.Paolo Rossi was born in Milan, Italy, in 1975. He received the Laurea degree (summa cum laude) in electrical engineering from the University of Pavia, Pavia, Italy, in 2000, where he is currently working toward the Ph.D. degree. His research interests are in the field of analog integrated circuits for wireless transceivers in CMOS and BiCMOS technology, with particular focus on the analysis and design of LNA and mixer for multi-standard applications.Francesco Svelto received the Laurea and Ph.D. degrees in electrical engineering from the University of Pavia, Pavia, Italy, in 1991 and 1995, respectively. From 1996 to 1997, he held a grant from STMicroelectronics to design CMOS RF circuits. In 1997, he was appointed Assistant Professor at the University of Bergamo, Italy, and in 2000, he joined the University of Pavia, where he is an Associate Professor. His current research interests are in the field of RF design and high-frequency integrated circuits for telecommunications. Dr. Svelto has been a member of the technical program committee of the IEEE Custom Integrated Circuits Conference since 2000 and the Bipolar/BiCMOS Circuits and Technology Meeting (BCTM) since 2003, and the European Solid State Circuits Conference in 2002. He served as Guest Editor of the March 2003 special issue of the IEEE Journal of Solid-State Circuits, of which he is currently an Associate Editor.Andrea Mazzanti was born in Modena (Italy) in 1976. He received the Laurea degree (summa cum Laude) in Electrical Engineering from the University of Modena and Reggio Emilia, Modena, Italy in 2001. Since 2001 he is pursuing his PhD in Electrical Engineering at University of Modena and Reggio Emilia, Italy. His major research interest are modelling of microwave semiconductor devices and design of CMOS RF integrated circuits, with particular focus on low noise oscillators and analog frequency dividers. During the summer of 2003 he was with Agere Systems, Allentown, PA as an internship student, working on the design of an highly integrated CMOS FM transmitter.Pietro Andreani received the M.S.E.E. from the University of Pisa, Italy, in 1988. He joined the Dept. of Applied Electronics, Lund University, Sweden, in 1990, where he contributed to the development of software tools for digital ASIC design. After working at the Dept. of Applied Electronics, University of Pisa, as a CMOS IC designer during 1994, he rejoined the Dept. of Applied Electronics in Lund as an Associate Professor, where he was responsible for the analog IC course package between 1995 and 2001, and where he received the Ph.D. degree in 1999. He is currently a Professor at the Center for Physical Electronics, ØrstedDTU, Technical University of Denmark, Kgs. Lyngby, Denmark, with analog/RF CMOS IC design as main research field.     

Influence of scattering and two-photon absorption on the optical loss in GaAs-Al/sub 2/O/sub 3/ nonlinear waveguides measured using femtosecond pulses

The influence of scattering and two-photon absorption on the optical loss in GaAs-Al/sub 2/O/sub 3/ semiconductor nonlinear waveguides has been studied using femtosecond pulses. By deploying a scattering technique, loss coefficients were evaluated over an extended wavelength range of 1.3-2.1 /spl mu/m in the near-infrared. A systematic study involving intensity and wavelength dependence of the loss revealed the presence of two-photon absorption for wavelengths below 1.6 /spl mu/m. A simple nonlinear transmission study enabled the separation of the two-photon absorption coefficient from scattering and linear absorption. The calculated two-photon absorption coefficients were /spl sim/9-20 cm/GW.     

Susceptible Workload Evaluation and Protection using Selective Fault Tolerance

Low power fault tolerance design techniques trade reliability to reduce the area cost and the power overhead of integrated circuits by protecting only a subset of their workload or their most vulnerable parts. However, in the presence of faults not all workloads are equally susceptible to errors. In this paper, we present a low power fault tolerance design technique that selects and protects the most susceptible workload. We propose to rank the workload susceptibility as the likelihood of any error to bypass the logic masking of the circuit and propagate to its outputs. The susceptible workload is protected by a partial Triple Modular Redundancy (TMR) scheme. We evaluate the proposed technique on timing-independent and timing-dependent errors induced by permanent and transient faults. In comparison with unranked selective fault tolerance approach, we demonstrate a) a similar error coverage with a 39.7% average reduction of the area overhead or b) a 86.9% average error coverage improvement for a similar area overhead. For the same area overhead case, we observe an error coverage improvement of 53.1% and 53.5% against permanent stuck-at and transition faults, respectively, and an average error coverage improvement of 151.8% and 89.0% against timing-dependent and timing-independent transient faults, respectively. Compared to TMR, the proposed technique achieves an area and power overhead reduction of 145.8% to 182.0%.     

SR ARQ packet delay statistics on markov channels in the presence of variable arrival rate

In this letter we investigate the packet delay statistics of a fully reliable selective repeat ARQ scheme by considering a discrete time Markov channel with non-instantaneous feedback and assigned round-trip delay m. Our focus is on studying the impact of the arrival process on the delay experienced by a packet. An exact model is introduced to represent the system constituted by the transmitter buffer, the m round-trip slots, and the channel state. By means of this model, we evaluate and discuss the delay statistics and we analyze the impact of the system parameters, in particular the packet arrival rate, on the delay statistics     

Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enables Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects

Biomaterials research usually focuses on functional and structural mimicry of the extracellular matrix or tissue hierarchy and morphology. Most recently, material‐induced modulatory effects on the immune system to arouse a healing response is another upcoming strategy. Approaches, however, that integrate both aspects to induce healing and facilitate specific cell adhesion are so far little explored. This study exploits manifold but chemical crosslinker free functionalization of hydrophilic and nonadhesive electrospun fiber surfaces with peptides for controlled cell adhesion, and with neutra­lizing antibodies targeting the master cytokine tumor necrosis factor (TNF) to dampen proinflammatory reactions by the fiber adherent cells. It is demonstrated that cell attachment and immunomodulatory properties of a textile can be tailored at the same time to generate meshes that combine immunosuppressive activity with specific cell adhesion properties.     

Biologically Inspired and Magnetically Recoverable Copper Porphyrinic Catalysts: A Greener Approach for Oxidation of Hydrocarbons with Molecular Oxygen

An efficient synthetic method for magnetically recoverable hybrid copper porphyrinic nanomaterials is reported. These functionalized magnetic materials prove to be efficient bioinspired oxidation catalysts of olefins and thiols, using molecular oxygen as oxidant, in total absence of reductants and solvents, with the highest TON (turnover number) yet achieved for this reaction (≈200 000). A comparative study between homogeneous and heterogeneous oxidation of cyclohexene is discussed, revealing the heterogeneous system to be the most promising concerning stability and reusability of the catalysts. The full characterization of the magnetic hybrid porphyrinic nanomaterials, by transmission electron microscopy, flame atomic absorption spectrometry, thermogravimetry, N₂ sorption, and infrared spectroscopy, is also described.     

Tampering in RFID: A Survey on Risks and Defenses

RFID is a well-known pervasive technology, which provides promising opportunities for the implementation of new services and for the improvement of traditional ones. However, pervasive environments require strong efforts on all the aspects of information security. Notably, RFID passive tags are exposed to attacks, since strict limitations affect the security techniques for this technology. A critical threat for RFID-based information systems is represented by data tampering, which corresponds to the malicious alteration of data recorded in the tag memory. The aim of this paper is to describe the characteristics and the effects of data tampering in RFID-based information systems, and to survey the approaches proposed by the research community to protect against it. The most important recent studies on privacy and security for RFID-based systems are examined, and the protection given against tampering is evaluated. This paper provides readers with an exhaustive overview on risks and defenses against data tampering, highlighting RFID weak spots and open issues.     

Optical processing technique for spot-size measurements in single-mode fibres

A new, simple and very promising technique for spot-size measurements in single-mode fibres is proposed, based on a spatial filter which modulates the optical beam at the output of the fibre. Its inherent simplicity, accuracy and high efficiency make it attractive for laboratory and factory measurements.     

Impact of inulin and okara on Lactobacillus acidophilus La-5 and Bifidobacterium animalis Bb-12 viability in a fermented soy product and probiotic survival under in vitro simulated gastrointestinal conditions

The effect of inulin and/or okara flour on Lactobacillus acidophilus La-5 and Bifidobacterium animalis Bb-12 viability in a fermented soy product (FSP) and on probiotic survival under in vitro simulated gastrointestinal conditions were investigated throughout 28 days of storage at 4 °C. Employing a 2² design, four FSP trials were produced from soymilk fermented with ABT-4 culture (La-5, Bb-12, and Streptococcus thermophilus): FSP (control); FSP-I (with inulin, 3 g/100 mL of soymilk); FSP-O (with okara, 5 g/100 mL); FSP-IO (with inulin + okara, ratio 3:5 g/100 mL). Probiotic viabilities ranged from 8 to 9 log cfu/g during the 28 days of storage, and inulin and/or okara flour did not affect the viability of La-5 and Bb-12. Bb-12 resistance to the artificial gastrointestinal juices was higher than for La-5, since the Bb-12 and La-5 populations decreased approximately 0.6 log cfu/g and 3.8 log cfu/g, respectively, throughout storage period. Even though the protective effect of inulin and/or okara flour on probiotic microorganisms was not significant, when compared to a fresh culture, the FSP matrix improved Bb-12 survival on day 1 of storage and may be considered a good vehicle for Bb-12 and could play an important role in probiotic protection against gastrointestinal juices.