3D Bioprinting of Gelatin–Xanthan Gum Composite Hydrogels for Growth of Human Skin Cells

In recent years, bioprinting has attracted much attention as a potential tool for generating complex 3D biological constructs capable of mimicking the native tissue microenvironment and promoting physiologically relevant cell–cell and cell–matrix interactions. The aim of the present study was to develop a crosslinked 3D printable hydrogel based on biocompatible natural polymers, gelatin and xanthan gum at different percentages to be used both as a scaffold for cell growth and as a wound dressing. The CellInk Inkredible 3D printer was used for the 3D printing of hydrogels, and a glutaraldehyde solution was tested for the crosslinking process. We were able to obtain two kinds of printable hydrogels with different porosity, swelling and degradation time. Subsequently, the printed hydrogels were characterized from the point of view of biocompatibility. Our results showed that gelatin/xanthan-gum bioprinted hydrogels were biocompatible materials, as they allowed both human keratinocyte and fibroblast in vitro growth for 14 days. These two bioprintable hydrogels could be also used as a helpful dressing material.     

Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications

The successful clinical application of bone tissue engineering requires customized implants based on the receiver’s bone anatomy and defect characteristics. Three-dimensional (3D) printing in small animal orthopedics has recently emerged as a valuable approach in fabricating individualized implants for receiver-specific needs. In veterinary medicine, because of the wide range of dimensions and anatomical variances, receiver-specific diagnosis and therapy are even more critical. The ability to generate 3D anatomical models and customize orthopedic instruments, implants, and scaffolds are advantages of 3D printing in small animal orthopedics. Furthermore, this technology provides veterinary medicine with a powerful tool that improves performance, precision, and cost-effectiveness. Nonetheless, the individualized 3D-printed implants have benefited several complex orthopedic procedures in small animals, including joint replacement surgeries, critical size bone defects, tibial tuberosity advancement, patellar groove replacement, limb-sparing surgeries, and other complex orthopedic procedures. The main purpose of this review is to discuss the application of 3D printing in small animal orthopedics based on already published papers as well as the techniques and materials used to fabricate 3D-printed objects. Finally, the advantages, current limitations, and future directions of 3D printing in small animal orthopedics have been addressed.     

Isoprene rubber filled with silica generated in situ

We modified synthetic isoprene rubber by means of the in situ generation of silica particles through the sol–gel process starting from tetraethoxysilane (TEOS) as an inorganic oxide precursor. Different reaction conditions were investigated with variations in the initial TEOS content, the reaction time of the sol–gel process, and the presence of a coupling/surfactant agent (octyltriethoxysilane). Organic–inorganic hybrid materials with a silica content up to 70 phr were obtained with the complete conversion of TEOS to silica for a long enough sol–gel reaction time. A very homogeneous dispersion of silica particles was observed in all cases together with a very good adhesion between the filler and matrix. The size of the in situ generated silica was controlled by the appropriate addition of octyltriethoxysilane. Swelling and extraction tests and dynamic mechanical analysis indicated that the vulcanization process of isoprene rubber was perturbed by the sol–gel process; this led to a slight decrease in the crosslinking degree. However, a significant reinforcing effect due to the presence of silica particles was observed for all of the investigated samples. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Antioxidant activity,color chromaticity coordinates,and chemical characterization of monofloral honeys from Morocco

The bioprospecting of several monofloral Moroccan honeys was carried out. The antiradical activity expressed as mmol Trolox equivalents/kg of honey and evaluated by 2,2-diphenyl-1-picrylhydrazyl assay, ranged from 0.15 for euphorb honey to 1.08 for citrus honey. The antioxidant activity expressed as mmol Fe²⁺/kg and evaluated by ferric ion reducing antioxidant power assay, ranged from 0.96 for euphorb honey to 4.74 for orange honey. The total phenol content was evaluated by colorimetric assay, while the color attributes were evaluated as transmittance data. Significant Pearson correlation factors were found between total polyphenol amount and antioxidant activity and between color attributes and antioxidant activity. Furthermore the chemical composition of volatile organic compounds was determined. The volatile organic compounds chemical composition of the studied honeys was mainly represented by terpene and benzene derivatives, Maillard reaction products, isoprenoids, and hydrocarbons. The volatiles fingerprint, as well as a targeted high-performance liquid chromatography analysis of the polar components, was used to tentatively confirm the declared botanical origin of the samples studied.     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

Brain fMRI reactivity to smoking-related images before and during extended smoking abstinence.

[Correction Notice: An erratum for this article was reported in Vol 18(3) of Experimental and Clinical Psychopharmacology (see record 2010-11933-011). In the article the authors find it necessary to redefine the thresholding procedure used for data analyses, due to problems in the Brain Voyager software. This does not affect the main findings of the paper.] Reactivity to smoking-related cues may play a role in the maintenance of smoking behavior and may change depending on smoking status. Whether smoking cue-related functional MRI (fMRI) reactivity differs between active smoking and extended smoking abstinence states currently is unknown. We used fMRI to measure brain reactivity in response to smoking-related versus neutral images in 13 tobacco-dependent subjects before a smoking cessation attempt and again during extended smoking abstinence (52 ± 11 days) aided by nicotine replacement therapy. Prequit smoking cue induced fMRI activity patterns paralleled those reported in prior smoking cue reactivity fMRI studies. Greater fMRI activity was detected during extended smoking abstinence than during the prequit assessment subcortically in the caudate nucleus and cortically in prefrontal (BA 6, 9, 44, 46), primary somatosensory (BA 1, 2, 3), temporal (BA 22, 41, 42), parietal (BA 7, 40) anterior cingulate (BA 24, 32), and posterior cingulate (BA 31) cortex. These data suggest that during extended smoking abstinence, fMRI reactivity to smoking versus neutral stimuli persists in brain areas involved in attention, somatosensory processing, motor planning, and conditioned cue responding. In some brain regions, fMRI smoking cue reactivity is increased during extended smoking abstinence in comparison to the prequit state, which may contribute to persisting relapse vulnerability. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pulsed laser deposition of organic and biological materials

We report on the deposition of soft matter thin films by Matrix Assisted Pulsed Laser Evaporation (MAPLE). In particular, thin layers of biological material (Bovine Serum Albumin) and polymers (polyfluorene) for medical and optoelectronic applications, were realized by laser irradiating a frozen solution containing a low amount of material diluted in a laser absorbing volatile solvent. The depositions were carried out varying different parameters as solvent–solute concentration, solvent nature, laser fluencies, etc. The optical, morphological, structural and spectroscopical properties were detected by means of different analyses as FTIR, photoluminescence, AFM and SDS.     

Effects of nutrient supplementation on fermentation kinetics, H2S evolution, and aroma profile in Verdicchio DOC wine production

Different yeast nutrient additions were studied for the 2008 and 2009 vintages of Verdicchio grape juice fermentation. Addition of yeast derivatives at the beginning of fermentation and/or different amounts of diammonium phosphate at various times within the first half of fermentation were examined, with initial yeast assimilable nitrogen concentrations set at 200 and 250 mg l^?1. Supplementation with glutathione in combination with this nitrogen addition was also evaluated. Fermentation rates were monitored throughout these fermentations carried out under different nutrient conditions. H₂S production during fermentation and synthesis of volatile compounds in the finished wines were quantified; the wines also underwent sensory evaluation. The fermentation kinetics were almost exclusively influenced by the inorganic nitrogen supplementation with diammonium phosphate. H₂S evolution was more affected by assimilable nitrogen than glutathione. Diammonium phosphate significantly reduced H₂S production, with a further reduction in the presence of yeast derivative. This nitrogen supplementation yielded higher concentrations of acetate esters, and in particular of isoamyl acetate (fruity aromas), which positively influences the analytical and aroma profile of wines and results in a general reduction in 2-phenylethanol production (floral aromas). Overall results (two harvesting times and vintages) indicate that the management with diammonium phosphate and yeast derivative supplementation improves the kinetics of fermentation and provides a good tool to reduce H₂S formation and increase the analytical and sensory quality of Verdicchio wine.     

Efficient analysis and experimental verification of substrate‐integrated slab waveguides for wideband microwave applications

This article presents a substrate integrated waveguide, named the substrate‐integrated slab waveguide (SISW), which exhibits a wide operation bandwidth. It consists of an integrated rectangular waveguide filled with a periodically perforated dielectric medium. An efficient procedure has been developed for the calculation of the dispersion diagram of SISWs, based on the Floquet theorem, in conjunction with the segmentation technique and the boundary‐integral–resonant‐mode‐expansion (BI‐RME) method. Numerical and experimental results confirm the performance of these waveguides and the efficiency of the analysis method. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2005.