电力电子可靠性的关键—材料特性

电力电子器件的寿命主要由完成其功能过程中大量的热循环所决定。热膨胀系数(CTE)的不同引起材料的疲劳和老化,这样的过程在有功循环和环境或者介质冷却所引起的循环中都会发生。为了理解由于热循环产生的载荷和引起的老化机理,提出了热机械模型以评估材料特性。本文介绍了焊接线剥离故障和大面积焊点处的裂纹扩展两种情况下的模型和计算结果。结果与实验数据相吻合。     

An algorithm used for ventricular fibrillation detection without interrupting chest compression

Ventricular fibrillation (VF) is the primary arrhythmic event in the majority of patients suffering from sudden cardiac arrest. Attention has been focused on this particular rhythm since it is recognized that prompt therapy, especially electrical defibrillation, may lead to a successful outcome. However, current versions of automated external defibrillators (AEDs) mandate repetitive interruptions of chest compression for rhythm analyses since artifacts produced by chest compression during cardiopulmonary resuscitation (CPR) preclude reliable electrocardiographic (ECG) rhythm analysis. Yet, repetitive interruptions in chest compression are detrimental to the success of defibrillation. The capability for rhythm analysis without requiring "hands-off" intervals will allow for more effective resuscitation. In this paper, a novel continuous-wavelet-transformation-based morphology consistency evaluation algorithm was developed for the detection of disorganized VF from organized sinus rhythm (SR) without interrupting the ongoing chest compression. The performance of this method was evaluated on both uncorrupted and corrupted ECG signals recorded from AEDs obtained from out-of-hospital victims of cardiac arrest. A total of 232 patients and 31,092 episodes of either VF or SR were accessed, in which 8195 episodes were corrupted by artifacts produced by chest compressions. We also compared the performance of this method with three other established algorithms, including VF filter, spectrum analysis, and complexity measurement. Even though there was a modest decrease in specificity and accuracy when chest compression artifact was present, the performance of this method was still superior to other reported methods for VF detection during uninterrupted CPR.     

Functional genomics studies shed light on the nutrition and gene expression of non-typhoidal Salmonella and enterovirulent E. coli in produce

Despite the fact that plants are not traditionally considered as hosts for human enteric pathogens, recent evidence suggests that non-typhoidal Salmonella and enterovirulent Escherichia coli recognize plants and rely on a specific set of genes to multiply in plant-associated environments, eventually causing dramatic outbreaks of illness. The advent of sensitive functional genomics tools, including differential fluorescence induction and in vivo expression technology, set the stage for the characterization of the genes and behaviors used by enterics to colonize, persist and proliferate within plants and the associated microbial communities. Meta-analysis of published data suggests that Salmonella and enterovirulent E. coli persist in plants using strategies that differ from those in phytobacteria. Virulence genes were upregulated in E. coli O157:H7 in the presence of lettuce leaf exudates, however Salmonella SPI-1 genes associated with gastroenteritis were dispensable during plant growth. Microarray and mutant studies of plant responses to human pathogens reveal that plants generally do not recognize Salmonella and enterovirulent E. coli as phytopathogens or beneficial symbionts, although the full spectrum of plant responses to enterics remains to be elucidated. Defining plant responses to human enteric pathogens becomes increasingly important as the feasibility of breeding for resistance to these organisms is being evaluated.     

Effect of short-term storage on phenolic content,o-diphenolase and peroxidase activities of cut yam tubers (Dioscorea sp)

The effect of short-term storage on the protein, phosphorus and phenolic content as well as peroxidase and o-diphenolase activities of cut, harvested Jamaican yam (Dioscorea sp) tubers (D rotundata. D alata and D cayenensis) was studied. There was an initial increase in the total phenolic content up to the third week of storage followed by a gradual decrease to the sixth week. Phenolic content was found to be highest in D cayenensis followed by D rotundata and D alata. The activities of peroxidase (EC 1. 11. 1. 7) and o-diphenolase (EC 1. 10.3.1) increased steadily up to the third week of storage and thereafter decreased to the fifth week. The intensity and rapidity of browning in tubers when cut, correlated very closely with the tuber o-diphenolase and phenolic content levels while the onset of rotting correlated with the peroxidase activity levels in the species studied.     

Effect of instructions and modeling on trainees low in interpersonal-communication skills.

Examined the effects of instructions and modeling in the reflection-of-feeling training of individuals low in interpersonal-communication skills. Participants with low scores on R. Carkhuff's Communication Index (25 males and 25 females) were randomly assigned by sex to 1 of the 5 training groups so that there were 5 males and 5 females in each group. After viewing videotaped training material, each participant conducted a 15-min interview with a volunteer "client" and completed the Communication Index a second time. Interviews were scored for frequency of reflection-of-feeling responses and level of empathic communication displayed. Analysis of the reflection-of-feeling data indicated that instructions and instructions-plus-modeling were facilitative procedures. Ratings of written and verbal empathy demonstrated the effectiveness of the 2 combined conditions: instructions-plus-modeling and modeling-plus-instructions. Calculation of correlations among scores on criterion measures revealed a positive correlation between reflection-of-feeling scores and ratings of empathic communication. (20 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Indications for the applicability of element signature analysis for the determination of the geographic origin of dried beef and poultry meat

In order to determine the geographic origin of poultry and dried beef, concentrations of a total of 72 different elements (occasionally represented with several isotopes) were analyzed by inductively coupled plasma high resolution mass spectrometry (ICP-HRMS). Additionally, gross chemical composition (GCC) was analyzed. The 25 poultry breast filets samples originated from Switzerland, France, Germany, Hungary, Brazil, and Thailand, and the 23 dried beef samples, made from M. biceps femoris and M. semitendinosus, were produced in Switzerland, Austria, Australia, United States, and Canada out of raw meat originating either from these or from other countries. A total of 66 and 46 of the elements and isotopes followed were detected in beef and poultry, respectively. For statistical analyses, only the most abundant isotopes per element were used. For both poultry meat and dried beef, a differentiation of the origins was possible using those elements, which were significantly different across countries (As, Na, Rb, and Tl in poultry; B, Ca, Cd, Cu, Dy, Eu, Ga, Li, Ni, Pd, Rb, Sr, Te, Tl, Tm, V, Yb, and Zn in beef). No sufficient differentiation between origins was possible with GCC. Further studies have to confirm the suitability of this approach for meat authentication with more samples.     

Anaerobic biotransformation of tetrabromobisphenol A, tetrachlorobisphenol A, and bisphenol A in estuarine sediments

Biotransformation of the flame retardants tetrabromobisphenol A and tetrachlorobisphenol A, and their ultimate biodehalogenation product, bisphenol A, was examined in anoxic estuarine sediments. Dehalogenation of tetrabromobisphenol A and tetrachlorobisphenol A was examined under conditions promoting either methanogenesis or sulfate reduction as the primary terminal electron-accepting process. Complete dehalogenation of tetrabromobisphenol A to bisphenol A with no further degradation of bisphenol A, was observed under both methanogenic and sulfate-reducing conditions. Dehalogenation of tetrachlorobisphenol A under both methanogenic and sulfate-reducing conditions resulted in the accumulation of a persistent dichlorinated bisphenol A isomer, while no bisphenol A was formed. Co-amendment of sediment enrichments with either 2,6-dibromo- or 2,6-dichlorophenol did not affect the extent of dehalogenation as compared to sediments that were amended only with the flame retardants. Sediment cultures pre-acclimated on 2-bromophenol dehalogenated the flame retardants in a manner similar to that of fresh sediments. No loss of bisphenol A was observed in separate incubations within 162 days under conditions promoting either methanogenesis, sulfate-reduction, iron(III)-reduction, or nitrate-reduction. Furthermore, identical enrichments that readily degraded 4-hydroxybenzoate, a structural analogue of bisphenol A, did not exhibit bisphenol A degradation. The dehalogenation of tetrabromo- and tetrachlorobisphenol A and the potential for accumulation of bisphenol A in anoxic sediments is significant given the widespread use of these chemicals.     

Agitation scale-up effects during VCM suspension polymerization

Experimental data are presented showing the effect of reactor agitation intensity and reactor size on final resin properties during VCM suspension polymerization. Experiments were carried out in three stirred batch polymerization reactors covering a broad range of vessel sizes (bench scale, pilot plant, and commercial production units). Reactors' shapes were geometrically similar. The same charge recipe and operating procedure was also used for all three reactors. The effects of major agitation parameters such as impeller diameter, width, and speed are correlated against resin properties using the Weber number. The same characteristic U-shaped curve is found for all three reactors when mean particle diameter is plotted versus Weber number. However, the curves do not lie on top of one another but are spread apart, the larger reactors having a higher Weber number. Another interesting feature is that the coefficient of variation (particle size standard deviation divided by mean diameter) decreases dramatically as reactor size is increased. Other resin properties also show improvement upon scale-up. In summary, resin properties continue to improve as reactor size is increased over the range studied (bench-to-commercial large reactor scale), but a correct application of the complex scale-up technology must be employed to take advantage of this observation.     

Two geometrical isomers of linoleic acid: Improved total syntheses

The total syntheses of 9(Z),12(E)- and 9(E),12(Z)-octadecadienoic acids have been carried out. A useful intermediate in both syntheses, 8-bromo-octanoic acid, recently has become available from commercial sources. This compound has been used to expedite the preparation of these isomers. The remaining carbon atoms were derived from propargyl alcohol along with either 1-heptyne or acetylene and 1-bromopentane. Because the overall yield for each sequence was roughly 15% and there were no extraordinary reaction conditions in any of the synthetic steps, the compounds could be prepared readily in multiple gram quantities. The syntheses of the two compounds were supported by data from a variety of spectroscopic techniques.