The Effectiveness of Telephone-Based Continuing Care in the Clinical Management of Alcohol and Cocaine Use Disorders: 12-Month Outcomes.

This study of continuing care for substance dependent patients compared a telephone-based monitoring and brief counseling intervention (TEL) with 2 face-to-face interventions, relapse prevention (RP) and standard 12-step group counseling (STND). The participants were graduates of intensive outpatient programs who had current dependence on alcohol and/or cocaine. Self-report, collateral, and biological measures of alcohol and cocaine use were obtained over a 12-month follow-up. The treatment groups did not differ on abstinence-related outcomes in the complete sample (N = 359) or on cocaine use outcomes in participants with cocaine dependence (n = 268). However, in participants with alcohol dependence only (n = 91), TEL produced better alcohol use outcomes than STND on all measures examined and better outcomes than RP on some of the measures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Parametric study of riveted joints

As one of the most reliable fasteners, solid riveted joints are widely utilized in many industrial areas. In the present work, the authors recalled some results on the riveting process and the strength of one kind of riveted joints obtained by simulation and experimental investigations in a previous paper. The numerical results were in very good agreement with the experimental results, allowing us to validate our simulation approach and its use for further studies. We selected several engineering parameters for the riveted joint: initial assembly, friction coefficient, rivet’s geometry and sheets’ geometry, in order to carry out a parametric study and determine their relative importance. These were conducted in FEA software. The results showed the impact on riveting process and the strength of the riveted joint by varying each parameter which was interesting for the industry.     

Chitosan amphiphiles provide new drug delivery opportunities

Chitosan, an acid soluble and renewable biopolymer, was first studied as a drug delivery agent in 1990. This review focuses on the relatively newer self‐assembling chitosan amphiphiles and their use as drug delivery agents. Chitosan amphiphiles, first introduced in the late 1990s, are prepared by conjugating hydrophobic and sometimes additional hydrophilic units to chitosan. These amphiphiles self‐assemble in aqueous media at neutral pH to form micelles, with critical micellar concentrations (CMCs) ranging from 0.09 to 700 µg mL^?1. The CMCs depend on the actual molecular architecture, molecular weight and hydrophobic character, but are typically lower than the values reported for block copolymer amphiphiles. As well as linear amphiphiles in which chitosan is derivatised with hydrophobic pendant groups, new claw amphiphiles have been prepared in which chitosan amphiphiles radiate geometrically from a dendrimer core. These chitosan amphiphiles (linear and claw) have been exploited as drug delivery agents and they increase the oral bioavailability of hydrophobic drugs up to sixfold, deliver hydrophobic drugs to tumours, genes to the liver via the intravenous route, genes to the muscle via the intramuscular routes and small interfering RNAs to tumours via the intratumoural route. Chitosan amphiphile nanoparticles also deliver peptides to the brain via the intravenous and oral routes. © 2014 Society of Chemical Industry     

Computing all subtree repeats in ordered trees

We consider the problem of computing all subtree repeats in a given labeled ordered tree. We first transform the tree to a string representing its postfix notation, and then present an algorithm based on the bottom-up technique to solve it. The proposed algorithm consists of two phases: the preprocessing phase and the phase where all subtree repeats are computed. The linear time and space complexity of the proposed algorithm are important parts of its quality.     

Domestic exposure to fungal allergenic particles determined by halogen immunoassay using subject's serum versus particles carrying three non‐fungal allergens determined by allergen‐specific HIA

Studies that estimate indoor aeroallergen exposure typically measure a pre‐selected limited range of allergens. In this study, inhalable aeroallergen particles were quantified using the halogen immunoassay (HIA) to determine the contribution of fungal and non‐fungal aeroallergens to total allergen exposure. Bioaerosols from 39 homes of fungal‐allergic subjects were sampled using inhalable fraction samplers and immunostained by HIA using resident subject's immunoglobulin E (IgE) to detect allergen‐laden particles. Fungal aerosols as well as particles carrying mite, cat, and cockroach allergens were identified and enumerated by HIA. Reservoir dust‐mite (Der p 1), cat (Fel d 1), and cockroach (Bla g 1) allergen concentrations were quantified by ELISA. Fungal particles that bound subject's IgE in the HIA were 1.7 (bedroom)‐ and 1.4 (living room)‐fold more concentrated than Der p 1, Fel d 1, and Bla g 1 allergen particles combined. Predominant fungal conidia that bound IgE were derived from common environmental genera including Cladosporium and other fungi that produce amerospores. Airborne mite, cat, and cockroach allergen particle counts were not associated with reservoir concentrations determined by ELISA. This study demonstrates that inhalable fungal aerosols are the predominant aeroallergen sources in Sydney homes and should be considered in future exposure assessments.     

WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide

The present study deals with the optimization of polyimide (PI) mechanical properties, obtained by Spark Plasma Sintering (SPS), by using a method combining Design of Experiments (DOE) with physical, structural, and mechanical characterizations. The effects of SPS parameters such as temperature, pressure, dwell time, and cooling rate on the density, mechanical properties, and structure of PI were investigated. The experimental results revealed that the mechanical properties of the material were optimized by raising the sintering temperature up to 350°C. The optimized SPS processing parameters were a temperature of 350°C, a pressure of 40 MPa, and a dwell time of 5 min. Under these conditions, a relative density of 99.6% was reached within only a few minutes. The corresponding mechanical properties consisted of Young's modulus of 3.43 GPa, a Shore D hardness of 87.3, and a compressive strength of 738 MPa for a maximum compressive strain of 61.8%. Moreover, when working at 320°C and at 100 MPa, an increase in the dwell time was necessary to enhance the properties. Contrary to the other parameters, the cooling rate appeared to be a non‐significant parameter. Finally, correlations between the PI structure and the mechanical properties were made to demonstrate the densification mechanisms. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41542.     

Building human agency: a timely manifesto

The 2009 Passive and Low Energy Architecture Conference (PLEA), held in Québec City, Canada, was themed ‘Architecture, Energy and the Occupant's Perspective’, with the ambition of positioning building inhabitants as key ‘active’ determinants of energy performance in ‘passive’ design through adaptive opportunities. Conference delegates committed to a Manifesto that embodied both the key longstanding priorities of PLEA and explicitly conveyed the priorities of the conference hosts. The Manifesto is examined in terms of how it captures and represents a shift in thinking that has occurred over the past few years, away from technological and technocratic solutions to comfort provisioning and towards reframing building energy consumption as a social and ethical challenge in which comfort plays a key role.

La Conférence 2009 sur l'Architecture Passive et Basse Energie (PLEA), qui s'est tenue à Québec, au Canada, avait pour thème « Architecture, Energie et la Perspective de l'Occupant », avec pour ambition de positionner les habitants d'immeubles comme principaux déterminants « actifs » de la performance énergétique dans un design « passif » par des opportunités d'adaptation. Les délégués de la conférence se sont engagés en faveur d'un Manifeste qui, tout à la fois, incarne les principales priorités qui sont depuis longtemps celles des Conférences PLEA et traduit explicitement les priorités des hôtes de la conférence. Cet article examine le Manifeste quant à la manière dont il appréhende et reflète le changement intervenu au cours de ces dernières années dans la manière de voir les choses, consistant à se détourner d'un confort fourni par des solutions technologiques et technocratiques et à aller dans le sens d'un recadrage de la consommation énergétique des immeubles considérée comme un défi social et éthique dans lequel le confort joue un rôle clé.

Mots clés: comportement adaptatif, agence, confort, fourniture du confort, qualité environnementale intérieure, habitants, manifeste, Conférence sur l'Architecture Passive et Basse Energie (PLEA)