Incorporating Time-Varying Perturbations Into the Dynamic Inoperability Input–Output Model

This paper introduces a methodology to extend the capabilities of the dynamic inoperability input-output model (DIIM) to account for perturbations to sectors of the economy that are time varying and probabilistic. The DIIM accounts for the interdependent nature of the economy in determining the impact of a disruption on the ability of each economic sector to satisfy the prevailing demand. While the original formulation of the DIIM only allows for a single perturbation vector, this paper extends the DIIM to allow a perturbation matrix to be utilized as inputs to the model. The underlying motivation for this paper is understanding the impact of a pandemic on a regional economy. As such, idiosyncrasies associated with a pandemic are also accounted for in the model formulation. These include translating workforce absenteeism into a measure of sector inoperability and accounting for the impact of long-term absenteeism on a sector's ability to deliver its as-planned production output.     

Transmission power and data rate aware routing on wireless networks

Wireless networks can vary both the transmission power and modulation of links. Existing routing protocols do not take transmission power control (TPC) and modulation adaptation (also known as rate adaptation – RA) into account at the same time, even though the performance of wireless networks can be significantly improved when routing algorithms use link characteristics to build their routes. This article proposes and evaluates extensions to routing protocols to cope with TPC and RA. The enhancements can be applied to any link state or distance vector routing protocols. An evaluation considering node density, node mobility and link error show that TPC- and RA-aware routing algorithms improve the average latency and the end-to-end throughput, while consuming less energy than traditional protocols.     

Skill Memory in Biped Locomotion

Robots must be able to adapt their motor behavior to unexpected situations in order to safely move among humans. A necessary step is to be able to predict failures, which result in behavior abnormalities and may cause irrecoverable damage to the robot and its surroundings, i.e. humans. In this paper we build a predictive model of sensor traces that enables early failure detection by means of a skill memory. Specifically, we propose an architecture based on a biped locomotion solution with improved robustness due to sensory feedback, and extend the concept of Associative Skill Memories (ASM) to periodic movements by introducing several mechanisms into the training workflow, such as linear interpolation and regression into a Dynamical Motion Primitive (DMP) system such that representation becomes time invariant and easily parameterizable. The failure detection mechanism applies statistical tests to determine the optimal operating conditions. Both training and failure testing were conducted on a DARwIn-OP inside a simulation environment to assess and validate the failure detection system proposed. Results show that the system performance in terms of the compromise between sensitivity and specificity is similar with and without the proposed mechanism, while achieving a significant data size reduction due to the periodic approach taken.     

Adaptive Robot Biped Locomotion with Dynamic Motion Primitives and Coupled Phase Oscillators

In order to properly function in real-world environments, the gait of a humanoid robot must be able to adapt to new situations as well as to deal with unexpected perturbations. A promising research direction is the modular generation of movements that results from the combination of a set of basic primitives. In this paper, we present a robot control framework that provides adaptive biped locomotion by combining the modulation of dynamic movement primitives (DMPs) with rhythm and phase coordination. The first objective is to explore the use of rhythmic movement primitives for generating biped locomotion from human demonstrations. The second objective is to evaluate how the proposed framework can be used to generalize and adapt the human demonstrations by adjusting a few open control parameters of the learned model. This paper contributes with a particular view into the problem of adaptive locomotion by addressing three aspects that, in the specific context of biped robots, have not received much attention. First, the demonstrations examples are extracted from human gaits in which the human stance foot will be constrained to remain in flat contact with the ground, forcing the “bent-knee” at all times in contrast with the typical straight-legged style. Second, this paper addresses the important concept of generalization from a single demonstration. Third, a clear departure is assumed from the classical control that forces the robot’s motion to follow a predefined fixed timing into a more event-based controller. The applicability of the proposed control architecture is demonstrated by numerical simulations, focusing on the adaptation of the robot’s gait pattern to irregularities on the ground surface, stepping over obstacles and, at the same time, on the tolerance to external disturbances.     

Relational Learning with GPUs: Accelerating Rule Coverage

Relational learning algorithms mine complex databases for interesting patterns. Usually, the search space of patterns grows very quickly with the increase in data size, making it impractical to solve important problems. In this work we present the design of a relational learning system, that takes advantage of graphics processing units (GPUs) to perform the most time consuming function of the learner, rule coverage. To evaluate performance, we use four applications: a widely used relational learning benchmark for predicting carcinogenesis in rodents, an application in chemo-informatics, an application in opinion mining, and an application in mining health record data. We compare results using a single and multiple CPUs in a multicore host and using the GPU version. Results show that the GPU version of the learner is up to eight times faster than the best CPU version.     

A Bayesian solution to the multiple composite hypothesis testing for fault diagnosis in dynamic systems

This paper is concerned with model-based isolation and estimation of additive faults in discrete-time linear Gaussian systems. The isolation problem is stated as a multiple composite hypothesis testing on the innovation sequence of the Kalman filter (KF) that considers the system operating under fault-free conditions. Fault estimation is carried out, after isolating a fault mode, by using the Maximum a Posteriori (MAP) criterion. An explicit solution is presented for both fault isolation and estimation when the parameters of the fault modes are assumed to be realizations of specific random variables (RV).     

Satellite-based estimates of groundwater storage variations in large drainage basins with extensive floodplains

This study presents monthly estimates of groundwater anomalies in a large river basin dominated by extensive floodplains, the Negro River Basin, based on the synergistic analysis using multisatellite observations and hydrological models. For the period 2003-2004, changes in water stored in the aquifer is isolated from the total water storage measured by GRACE by removing contributions of both the surface reservoir, derived from satellite imagery and radar altimetry, and the root zone reservoir simulated by WGHM and LaD hydrological models. The groundwater anomalies show a realistic spatial pattern compared with the hydrogeological map of the basin, and similar temporal variations to local in situ groundwater observations and altimetry-derived level height measurements. Results highlight the potential of combining multiple satellite techniques with hydrological modeling to estimate the evolution of groundwater storage.     

Automatic camera control in virtual environments augmented using multiple sparse videos

Automated virtual camera control has been widely used in animation and interactive virtual environments. We have developed a multiple sparse camera based free view video system prototype that allows users to control the position and orientation of a virtual camera, enabling the observation of a real scene in three dimensions (3D) from any desired viewpoint. Automatic camera control can be activated to follow selected objects by the user. Our method combines a simple geometric model of the scene composed of planes (virtual environment), augmented with visual information from the cameras and pre-computed tracking information of moving targets to generate novel perspective corrected 3D views of the virtual camera and moving objects. To achieve real-time rendering performance, view-dependent textured mapped billboards are used to render the moving objects at their correct locations and foreground masks are used to remove the moving objects from the projected video streams. The current prototype runs on a PC with a common graphics card and can generate virtual 2D views from three cameras of resolution 768×576 with several moving objects at about 11 fps.     

Segmentation of ultrasound images of the carotid using RANSAC and cubic splines

A new algorithm is proposed for the semi-automatic segmentation of the near-end and the far-end adventitia boundary of the common carotid artery in ultrasound images. It uses the random sample consensus method to estimate the most significant cubic splines fitting the edge map of a longitudinal section. The consensus of the geometric model (a spline) is evaluated through a new gain function, which integrates the responses to different discriminating features of the carotid boundary: the proximity of the geometric model to any edge or to valley shaped edges; the consistency between the orientation of the normal to the geometric model and the intensity gradient; and the distance to a rough estimate of the lumen boundary.A set of 50 longitudinal B-mode images of the common carotid and their manual segmentations performed by two medical experts were used to assess the performance of the method. The image set was taken from 25 different subjects, most of them having plaques of different classes (class II to class IV), sizes and shapes.The quantitative evaluation showed promising results, having detection errors similar to the ones observed in manual segmentations for 95% of the far-end boundaries and 73% of the near-end boundaries.     

The AMGA Metadata Service

We present the AMGA metadata catalogue, which was developed as part of the EGEE (enabling Grids for EsciencE) project’s gLite Grid middleware. AMGA provides access to meta data for files stored on the Grid, as well as a simplified general access to relational data stored in database systems. Design and implementation of AMGA was done in close collaboration with the very diverse EGEE user community to make sure all functionality, performance and security requirements were met. In particular, AMGA targets the needs of the high energy physics community to rapidly access very large amounts of metadata, as well as the needs for security of the biomedical community. AMGA therefore tightly integrates fine grained access control making use of a virtual organisation management system. In addition, it offers advanced federation and features to increase dependability, performance and data security.