Synthesis of High Density and Transparent Forsterite Ceramics Using Nano-Sized Precursors and Their Dielectric Properties

Forsterite (Mg₂SiO₄) ceramics were prepared using Mg(OH)₂ and SiO₂ as precursors, and the effect of powder characteristics of Mg(OH)₂ on calcination and sintering was investigated. The use of highly dispersed Mg(OH)₂ powder (HD powder) resulted in a lower calcination temperature. Forsterite powder of high homogeneity and small particle size prepared from the HD powder enabled synthesis of high-density forsterite ceramics by ordinary sintering without applying external pressure. Moreover, transparent forsterite ceramics were successfully synthesized through addition of excess Mg to the precursors to compensate for Mg evaporated during the sintering process. Subsequent dielectric measurements revealed that the transparent forsterite ceramics had a very low dielectric loss (tan δ<10⁻⁴).     

A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

Methanation of CO2 with the oxygen-deficient Ni(II)-ferrite under dynamic conditions

The continuous methanation of CO₂ has been accomplished over hydrogen-reduced Ni(II)-bearing ferrite (Ni_xFe_3–xO_4–; x=0.39, > 0) in a mixed gas flow of CO₂ and H₂ at 250–375 °C. The yield and the selectivity for the methanation were larger than 50% and 95%, respectively, at the initial stage of the process. They decreased to 31% and 89%, respectively, after 6 h methanation. The innovative results can be ascribed to the use of the new material; hydrogen-reduced Ni(II)-bearing ferrite. Its formation was evinced by chemical analyses and the increase in the lattice constant; the lattice constant of the Ni(II)-bearing ferrite (a₀ 0.8375 nm) was enlarged to 0.8379 nm by hydrogen reduction. The enlarged lattice constant was not changed during the methanation. These findings suggest that the methanation occurs at the oxygen-deficient site of the hydrogen-reduced Ni(II)-bearing ferrite, as well as the formation of water by combination of the incorporated oxygens with hydrogen. The methanation consists of three steps of the elementary reaction. First, the oxygen-deficient sites are formed by hydrogen reduction; second, CO₂ is reduced to elementary carbon and two oxygen ions which are incorporated into the oxygen-deficient sites; and third, the carbon deposited on the surface of the reduced ferrite is selectively hydrogenated to CH₄.     

Output intersampling approach to direct closed-loop identification

A new direct closed-loop identification method, which uses the output intersampling technique, is proposed in this note. By using the intersampled plant input-output data, the proposed method removes the traditional restrictive identifiability condition, and does not require an external persistently exciting (PE) test signal     

Increase in the amount of erythrocyte delta-aminolevulinic acid dehydratase in workers with moderate lead exposure

This report summarizes our current understanding of the heavy chain haplotypes found in our laboratories' rabbits. Independently derived data from several laboratories have been synthesizes into a consistent picture of the linked inheritance of allotypic markers found on the different heavy chain classes and subclasses of rabbit immunoglobulins in pedigreed rabbits, including the families of three apparent VH-CH recombinants. In one recombinant, the entire group of CH markers (C mu, C gamma, and C alpha) recombined with the set of VH. Although in the other two recombinants all CH markers may also have recombined as a group, in one of these only IgG and IgA CH genes were informative; in the other recombinant, only the IgG allotypes were informative. Some allotypic determinants found on IgM molecules ("conformational") appear only when a specific variable region allotype (VHa) is combined with a specific mu constant region allotype (C mu). New combinations of VHa and C mu allotypes were generated in two of the genetic recombinants and led to new "conformational" determinants. The gains and losses observed lend support to the hypothesis that the determinants result from conformations generated by the combination of allotype-specific VH and C mu protein sequences. Conceivably, DNA events that join VH to diversity (D)- and joining (J)-coding sequences or mRNA processing events that splice J to C mu could be involved in generating the sequences that form allotype-specific determinants.     

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance     

Proton conduction at the surface of Y-doped BaCeO3 and its application to an air/fuel sensor

25 mol% Y³⁺-doped BaCeO₃ (BCY25) showed an extremely low activation energy of 0.3 eV for proton conduction at the surface. The resulting overall conductivity at the surface reached 8.24 × 10^–3 S cm^–1 at 400°C, which was 3, 8, and 28 times higher than those in the bulk of BCY25, 20 mol% Sm³⁺-doped ceria, and 8 mol% yttria-stabilized zirconia, respectively. Such fast proton conduction enabled an air/fuel (A/F ) sensor using BCY25 as the solid electrolyte to work above 150°C for H₂ and above 250°C for C₂H₄.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.