The effect of hydrogen on the shear modulus of polycrystalline aluminum

Electrolytic hydrogen saturation of polycrystalline aluminum leads to a significant (up to about 30%) decrease in the shear moduli G of samples. This change in G is accompanied neither by the loss of plasticity (no hydrogen-induced brittleness) nor by a change in the electric resistance (in contrast to that observed during the hydrogenation of typical hydride-forming metals and alloys, including those in the amorphous state).     

Integration of solvent extraction and liquid membrane separation: An efficient tool for recovery of bio-active substances from botanicals

An integrated process based on simultaneous solid-liquid extraction and liquid membrane separation is proposed for recovery and isolation of valuable species from botanicals. This integration provides complete exhausting of the solid material even in the case of very low solubility of the specified solute in the extracting solvent. Selectivity of the liquid membrane ensures a preferential transport of the desired solute from the native extract into the strip solution, while the other co-extracted species remain predominantly in the native extract.     

Traffic grooming on WDM rings using optical burst transport

A sublambda traffic-grooming scheme on wavelength-division-multiplexed (WDM) rings, which is called optical burst transport (OBT), is proposed. The network protocol and architecture allow increased flexibility to tailor the transport network behavior for efficient delivery of bursty data traffic. Using different network parameters, its performance is analyzed via simulation, and the implementation issues including the media-access-control (MAC) protocol, tunable-filter controller, and burst-mode receiver are addressed. Finally, the feasibility of the OBT with an experimental testbed built by the authors is demonstrated and a streaming-video application is used to present its overall functionality.     

Uniform Polarization Scattering With Fiber-Coil-Based Polarization Controllers

A detailed study of fiber-coil-based polarization controllers (PCs) is performed. First, a method to deterministically calculate the PC configuration in order to transform between any two states of polarization is presented. In a second stage, the case in which the configuration angles are randomly changed is studied. The cases of a single PC and of the system obtained with the concatenation of several PCs are analyzed. For both cases, a general expression for the variance of the Stokes parameters is obtained. Using this expression, it is demonstrated that it is possible to achieve uniform polarization scattering using a concatenation of fiber-coil-based PCs. Finally, it is shown that fiber-coil-based PCs can be used to emulate both first- and second-order polarization-mode dispersions     

Laser stimulated low-temperature crystallization of amorphous silicon

Laser annealing of amorphous silicon (a-Si) at different initial temperatures (77 and 300 K) has been studied. It is established that the laser-stimulated crystallization of silicon is possible at relatively low temperatures. A theoretical model is proposed, which explains this phenomenon by melting via the electron mechanism followed by recrystallization.     

Efficient particle filter-based processing algorithm for clutter suppression and IR point targets enhancement

A novel soft decision-based median subtraction filter is presented for clutter suppression and infrared (IR) point targets enhancement. The decision is made based on a jump Markov model and its state and parameter estimation using a particle filter. The scheme is compared with other conventional clutter background removal techniques and good results are obtained.     

Bandwidth correction for LED chromaticity

The spectral bandwidth formulae of Stearns and Stearns   are generalized for an arbitrary slit function. Correction coefficients are derived in terms of moments of the slit function. Application to model LED spectra measured with a compact, fiber‐coupled spectrometer having bandwidth of order 12 nm, and a nonlinear wavelength scale shows that accurate LED color measurements may be obtained with such an instrument. Fitting of the relatively broad slit function to line spectra for accurate wavelength calibration is also described. Such fitting, coupled consistently with the bandpass correction, improves the accuracy color measurements with a broad‐response spectrometer. © 2006 Wiley Periodicals, Inc. Col Res Appl, 31, 374–380, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20242     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.