A computationally efficient selected mapping technique for reducing PAPR of OFDM

In orthogonal frequency division multiplexing (OFDM) system, high value of peak-to-average power ratio (PAPR) is an operational problem that may cause non-linear distortion resulting in high bit error rate. Selected mapping (SLM) is a well known technique that shows good PAPR reduction capability but inflicts added computational overhead. In this paper, using Riemann sequence based SLM method, we applied reverse searching technique to find out low PAPR yielding phase sequences with significant reduction in computational complexity. Additionally, we explored side-information free transmission that achieves higher throughput but sacrifices PAPR reduction. Finally, to overcome this loss in PAPR reduction, we proposed application of Square-rooting companding technique over the output OFDM transmitted signal. Simulation results show that the proposed method is able to compensate the sacrifice in PAPR and achieved PAPR reduction of 8.9 dB with very low computational overhead.     

Novel Near‐Infrared Squaraine Sensitizers for Stable and Efficient Dye‐Sensitized Solar Cells

A new molecular design strategy for tuning the energy levels of cis‐configured squaraine sensitizers for dye‐sensitized solar cells is described. The Hammett substituent constant and the π‐conjugation length are used as quantitative indicators to modify the central squarate moiety of the sensitizer dyes; specifically, novel near‐infrared squaraine dyes HSQ3 and HSQ4 are synthesized by incorporation of an electron‐withdrawing and π‐extending ethyl cyanoacetate unit on the central squarate moiety. The solution absorption maximum of HSQ4 occurs at 703 nm, and the energy levels of the lowest unoccupied molecular orbital and the highest occupied molecular orbital are in the ideal range for energetically efficient electron injection and regeneration of the oxidized dye. A solar cell sensitized with HSQ4 exhibits a broad incident photo­n‐to‐current conversion efficiency spectrum, extending into the near‐infrared region with a maximum value of 80% at 720 nm, which is is the highest value reported for a squaraine dye–based dye‐sensitized solar cell. The HSQ4‐sensitized solar cell also exhibits excellent durability during light soaking, owing to the double anchors attaching the dye to the TiO₂ surface and to the long alkyl chains extending outward from the surface.     

Design and performance evaluation of amplifier modules in stackable ROADMs for low-cost CWDM access networks

Coarse wavelength division multiplexing (CWDM) network has proven to be promising lower cost network architecture for a significant cost advantage over dense wavelength division multiplexing due to the lower cost of lasers and the filters used in CWDM modules. A compatible amplifier module having bidirectional amplification capability was deployed for introducing inside stackable reconfigurable optical add/drop multiplexers in realizing large-scale CWDM networks. The amplifier module for use in the bidirectional IP transmission confirmed that the insertion losses of the nodes and the losses of the fibers connecting the nodes can be compensated effectively, allowing the network administrator to increase the number of nodes and fiber length of the network. However, the noise generated from the amplification due to amplified spontaneous emission must be considered in network design issues. In this paper, optical power penalties due to the bidirectional amplification were estimated by conducting experimentation on minimum detectable power of optical transceivers. After analyzing the power penalty issue, an IP-over-CWDM ring network was implemented and the performance of network was evaluated by monitoring the power and packet transmissions before and after the amplifier module was turned on.     

The growth and characterization of AlGaAs double heterostructures for the evaluation of reactor and source quality

AlGaAs double heterostructures are grown by low-pressure metalorganic chemical vapor deposition to evaluate the level of oxygen contamination in different trimethylaluminum sources. Effects of arsine purifiers, misoriented substrates, atmospheric exposure of the growth chamber, and possible phosphorus contamination are also studied. Extensive characterization is performed on these films by a variety of methods, including high-resolution x-ray diffraction, photoluminescence (PL), time-resolved photoluminescence, and secondary-ion mass spectrometry. The PL intensities for structures grown with the low-alkoxide grade are reproducibly much greater than those grown with the regular-grade TMA1. The use of AsH₃ purification improves the PL intensity.     

Analysis of energy-tax for multipath routing in wireless sensor networks

Recently, multipath routing in wireless sensor networks (WSN) has got immense research interest due to its capability of providing increased robustness, reliability, throughput, and security. However, a theoretical analysis on the energy consumption behavior of multipath routing has not yet been studied. In this paper, we present a general framework for analyzing the energy consumption overhead (i.e., energy tax) resulting from multipath routing protocol in WSN. The framework includes a baseline routing model, a network model, and two energy consumption schemes for sensor nodes, namely, periodic listening and selective wake-up schemes. It exploits the influence of node density, link failure rates, number of multiple paths, and transmission environment on the energy consumption. Scaling laws of energy-tax due to routing and data traffic are derived through analysis, which provide energy profiles of single-path and multipath routing and serve as a guideline for designing energy-efficient protocols for WSN. The crossover points of relative energy taxes, paid by single-path and multipath routing, reception, and transmission, are obtained. Finally, the scaling laws are validated and performance comparisons are depicted for a reference network via numerical results.     

On the cooperative MIMO communication for energy-efficient cluster-to-cluster transmission at wireless sensor network

Energy-efficient data transmission is one of the key factors for energy-efficient wireless sensor networks (WSN). Cooperative multiple input multiple output (MIMO) explores the wireless communication schemes between multiple sensors emphasizing the MIMO structure. In this paper, an energy-efficient cooperative technique is proposed for a WSN where selected numbers of sensors at the transmitting end are used to form a MIMO structure wirelessly connected with a selected number of sensors at the receiving end. The selection of nodes in the transmitting end is based on a selection function, which is a combination of channel condition, residual energy, inter-sensor distance in a cluster, and geographical location, whereas the selection in the receiving side is performed on the basis of channel condition. Data are sent by the sensors in a cluster to a data-gathering node (DGN) using a multihop transmission. We are concentrating our design on the intermediate hop, where sensors in a cluster transmit their data to the sensors in another cluster with MIMO communication. Energy models are evaluated for both correlated and uncorrelated scenarios. The delay model of the proposed cooperative MIMO is also derived. Experimental results show that the selected MIMO structure outperforms the unselected MIMO in terms of total energy consumption. They also show energy-efficient performance by around 20% over unselected MIMO when they are compared with single-input-single-output structure. Also, the proposed approach takes around 50 more rounds than the geographically selected approach before dying at distance d?>?20 m.     

A new design approach for dual‐band patch antenna serving Ku/K band satellite communications

A printed planar antenna with simple and intelligent geometrical structure has been proposed for Ku/K band satellite communication systems. The radiating patch of the antenna is formed by cutting rectangular slots and extending the radiating element to some extent. The final design of the antenna with optimized parameters is fabricated on ceramic–polytetrafluoroethylene substrate materials of dielectric constant ε_r = 10.2. The antenna is excited through a microstrip feed line and has reduced ground plane that covers only the non‐radiating portion of the antenna. The reduced complexity of the antenna is easy to fabricate and has overall dimension of 40 × 35 × 1.905 mm³. The results from experimental analysis show that the proposed antenna can guarantee a wide bandwidth of 12.0 to 16.4 GHz at lower band, and the upper band covers the frequency in the range of 17.53 to 19.5 GHz. The antenna has achieved appreciable gain in the range of 3.14 to 4.68 dBi for lower band and 2.03 to 3.65 dBi for upper band. The proposed antenna has offered almost symmetrical and directional radiation pattern that is essentially suitable for serving Ku/K band satellite applications. Copyright © 2015 John Wiley & Sons, Ltd.     

IGCC for PAPR Reduction in OFDM Systems Over the Nonlinearity of SSPA and Wireless Fading Channels

High peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems seriously impacts power efficiency in radio frequency section due to the nonlinearity of high-power amplifiers. In this article, an improved gamma correction companding (IGCC) is proposed for PAPR reduction and investigated under multipath fading channels. It is shown that the proposed IGCC provides a significant PAPR reduction while improving power spectral levels and error performances when compared with the previous gamma correction companding. IGCC outperforms existing companding methods when a nonlinear solid-state power amplifier (SSPA) is considered. Additionally, with the introduction of \(\alpha , \beta , \gamma \), and \(\varDelta \) parameters, the improved companding can offer more flexibility in the PAPR reduction and therefore achieves a better trade-off among the PAPR gain, bit error rate (BER), and power spectral density (PSD) performance. Moreover, IGCC improves the BER and PSD performances by minimizing the nonlinear companding distortion. Further, IGCC improves signal-to-noise ratio (SNR) degradation (\(\varDelta _{\mathrm{SNR}}\)) and total degradation performances by 12.2 and 12.8 dB, respectively, considering an SSPA with input power back-off of 3.0 dB. Computer simulation reveals that the performances of IGCC are independent of the modulation schemes and works with arbitrary number of subcarriers (N), while it does not increase computational complexity when compared with the existing companding schemes used for PAPR reduction in OFDM systems.