Components of the Complement Cascade Differ in Polycystic Ovary Syndrome

Complement pathway proteins are reported to be increased in polycystic ovary syndrome (PCOS) and may be affected by obesity and insulin resistance. To investigate this, a proteomic analysis of the complement system was undertaken, including inhibitory proteins. In this cohort study, plasma was collected from 234 women (137 with PCOS and 97 controls). SOMALogic proteomic analysis was undertaken for the following complement system proteins: C1q, C1r, C2, C3, C3a, iC3b, C3b, C3d, C3adesArg, C4, C4a, C4b, C5, C5a, C5b-6 complex, C8, properdin, factor B, factor D, factor H, factor I, mannose-binding protein C (MBL), complement decay-accelerating factor (DAF) and complement factor H-related protein 5 (CFHR5). The alternative pathway of the complement system was primarily overexpressed in PCOS, with increased C3 (p < 0.05), properdin and factor B (p < 0.01). In addition, inhibition of this pathway was also seen in PCOS, with an increase in CFHR5, factor H and factor I (p < 0.01). Downstream complement factors iC3b and C3d, associated with an enhanced B cell response, and C5a, associated with an inflammatory cytokine release, were increased (p < 0.01). Hyperandrogenemia correlated positively with properdin and iC3b, whilst insulin resistance (HOMA-IR) correlated with iC3b and factor H (p < 0.05) in PCOS. BMI correlated positively with C3d, factor B, factor D, factor I, CFHR5 and C5a (p < 0.05). This comprehensive evaluation of the complement system in PCOS revealed the upregulation of components of the complement system, which appears to be offset by the concurrent upregulation of its inhibitors, with these changes accounted for in part by BMI, hyperandrogenemia and insulin resistance.     

Recent Developments and Applications of Ionic Liquids in Gas Separation Membranes

Flue gas emissions and the harmful effects of these gases urge to separate and capture these unwanted gases. Ionic liquids due to negligible vapor pressure, thermal stability, and wide electrochemical stability have expanded its application in gas separations. A comprehensive overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation is given. The three general classifications of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed‐matrix membranes (ILMMMs) along with their applications, for the separation of various mixed gases systems is discussed in detail. Furthermore, issues, challenges, computational study, and future perspectives for ILMs are also considered.     

Novel superabsorbent materials from bacterial cellulose

A novel process for the production of superabsorbent materials (hydrogels) from bacterial cellulose (BC) was developed. Prior to crosslinking with a water‐soluble polyethylene glycol diacrylate (PEGDA), BC was first carboxymethylated and functionalized with glycidyl methacrylate. The degree of crosslinking influenced the swelling properties of the hydrogels. The use of greater amounts of PEGDA enhanced the formation of a thicker macromolecular network containing fewer capillary spaces in the crosslinked gel. The maximum water retention value of the hydrogels containing 2.5–3.5 mmol of carboxyl groups per gram of gel reached 125 g g^?1 in distilled water, and 29 g g^?1 in saline (0.9% NaCl solution). The highly porous hydrogel architecture with a pore size of 350–600 µm created a high specific surface area. This enables rapid mass penetration in superabsorbent applications. The superabsorbent hydrogels reached 80% of their maximum water absorption capacity in 30 min. © 2018 Society of Chemical Industry     

Comparison of different extraction methods for the extraction of major bioactive flavonoid compounds from spearmint (Mentha spicata L.) leaves

Different bioactive flavonoid compounds including catechin, epicatechin, rutin, myricetin, luteolin, apigenin and naringenin were obtained from spearmint (Mentha spicata L.) leaves by using conventional soxhlet extraction (CSE) and supercritical carbon dioxide (SC-CO₂) extraction at different extraction schemes and parameters. The effect of different parameters such as temperature (40, 50 and 60 °C), pressure (100, 200 and 300 bar) and dynamic extraction time (30, 60 and 90 min) on the supercritical carbon dioxide (SC-CO₂) extraction of spearmint flavonoids was investigated using full factorial arrangement in a completely randomized design (CRD). The extracts of spearmint leaves obtained by CSE and optimal SC-CO₂ extraction conditions were further analyzed by high performance liquid chromatography (HPLC) to identify and quantify major bioactive flavonoid compounds profile. Comparable results were obtained by optimum SC-CO₂ extraction condition (60 °C, 200 bar, 60 min) and 70% ethanol soxhlet extraction. As revealed by the results, soxhlet extraction had a higher crude extract yield (257.67 mg/g) comparing to the SC-CO₂ extraction (60.57 mg/g). Supercritical carbon dioxide extract (optimum condition) was found to have more main flavonoid compounds (seven bioactive flavonoids) with high concentration comparing to the 70% ethanol soxhlet extraction (five bioactive flavonoids). Therefore, SC-CO₂ extraction is considered as an alternative process compared to the CSE for obtaining the bioactive flavonoid compounds with high concentration from spearmint leaves.     

Effect of surface tension gradient on gas hold-up enhancement in aqueous solutions of electrolytes

The effect of addition of electrolytes on gas hold-up of air/water system was investigated experimentally in a laboratory scale bubble column. The experiments were carried out with four electrolytes, namely, NaCl, MgSO₄·7H₂O, Na₂SO₄ and CaCl₂·2H₂O and the concentrations of the solutions were varied from 0 to 0.3 mol/l. Enhancement of gas hold-up was observed for all four electrolytes at concentrations less than 0.1 mol/l. With the increase in concentration, the gas hold-up showed two different trends; in Na₂SO₄ and CaCl₂·2H₂O solutions, gas hold-up formed a sharp peak after the enhancement and leveled off at a value somewhat higher than that in water, whereas in NaCl and MgSO₄·7H₂O solutions, gas hold-up leveled off immediately after the enhancement without forming any peak. Experiments were also conducted to measure the surface tensions of the solutions with special focus in the low concentration region. A strong relation between the gas hold-up enhancement and the change of surface tension with the addition of electrolyte was found. It was also observed that the concentration at which maximum value of C(dσ/dC)² i.e. (concentration × surface tension gradient with respect to concentration²) is obtained corresponds to the concentration at which maximum gas hold-up enhancement occurs.     

Effects of different pH medium on swelling properties of 1,2,4,5-benzenetetracarboxylic-chitosan-filled chitosan bio-composites

Investigating the swelling properties of chitosan (Cs) film was deemed meaningful, as it plays an important role in predicting the life span of the film. Due to the limits in stability properties, the insertion of reinforcement agent is expected to increase the properties of Cs film. To this purpose, 1,2,4,5-benzenetetracarboxylic-chitosan (BTC) filler was inserted into the Cs matrix. The effect on the degree of swelling (Q _t ) and the rate of swelling (Q _r ) of the composite film at varying compositions of BTC filler (0, 2, 4, 6, 8, 10 and 12 wt/v%) was investigated. The Q _r and Q _t both decrease with an increasing BTC content, which may be attributed to the looser packaging structure, and the improvement of the hydrophobic character of the composites film. Thus, the addition of BTC filler, up to 10 wt/v%, makes the Cs film more stable with a prolonged swelling time. Meanwhile, electrostatic interaction and hydrogen bonding between the swelling medium and neutral groups, of the polymeric chains of the composites, contributed to the obtained values of Q _t and Q _r . The FTIR results support the argument for the Q _t and Q _r values of different compositions of BTC filler in the Cs matrix, in the different swelling medium (pH 2–14).     

Direct Growth and Photoluminescence of SiO<Subscript>x</Subscript> Nanowires and Aligned Nanocakes by Simple Carbothermal Evaporation

The growth of SiO_x nanowires and nanocakes on an Au-coated n-type-Silicon (100) substrate was achieved via carbothermal evaporation. The effects of the Au layer thickness and the rapid heating rate on the morphology of obtained SiO_x nanowires were investigated. A broad emission band from 290 to 600 nm was observed in the photoluminescence (PL) spectrum of these nanowires. There are four PL peaks: one blue emission peak 485 nm (2.56 eV) two green bands centered at 502 nm (2.47 eV) and 524 nm (2.37 eV) for nanocakes and one ultraviolet emission peak at 350 nm (3.54 eV) and a hemisphere curve over the bluish green area taken for SiO_x nanowires. These emissions may be related to the various oxygen defects and twofold coordinated silicon lone pair centers.     

Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.