Biopolymer foams from Novatein thermoplastic protein and poly(lactic acid)

A batch processing method is used to fabricate foams comprising of a blend of poly(lactic acid) (PLA) and Novatein, a protein‐based thermoplastic. Various compositions of Novatein/PLA are prepared with and without a compatibilizer, PLA grafted with itaconic anhydride (PLA‐g‐IA). Pure Novatein cannot form a cellular structure at a foaming temperature of 80 °C, however, in a blend with 50 wt % of PLA, microcells form with smaller cell sizes (3.36 µm) and higher cell density (8.44 × 10²¹ cells cm^?3) compared to pure PLA and blends with higher amounts of PLA. The incorporation of 50 wt % of semicrystalline Novatein stiffens the amorphous PLA phase, which restrains cell coalescence and cell collapse in the blends. At a foaming temperature of 140 °C, NTP₃₀–PLA₇₀ shows a unique interconnected porous morphology which can be attributed to the CO₂‐induced plasticization effect. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45561.     

In vitro efficacy of copper and silver ions in eradicating Pseudomonas aeruginosa, Stenotrophomonas maltophilia and Acinetobacter baumannii: implications for on-site disinfection for hospital infection control

Pseudomonas aeruginosa, Stenotrophomonas maltophilia and Acinetobacter baumannii are major opportunistic waterborne pathogens causing hospital-acquired infections. Copper-silver ionization has been shown to be effective in controlling Legionella colonization in hospital water systems. The objective was to determine the efficacy of copper and silver ions alone and in combination in eradicating P. aeruginosa, S. maltophilia and A. baumannii at the concentration applied to Legionella control. Kill curve experiments and mathematical modeling were conducted at copper and silver ion concentrations of 0.1, 0.2, 0.4, 0.8 and 0.01, 0.02, 0.04, 0.08 mg/L, respectively. The combinations of copper and silver ions were tested at concentrations of 0.2/0.02 and 0.4/0.04 mg/L, respectively. Initial organism concentration was ca. of 3 x 10(6)cfu/mL, and viability of the test organisms was assessed at predetermined time intervals. Samples (0.1 mL) withdrawn were mixed with 10 microL neutralizer solution immediately, serially diluted and plated in duplicate onto blood agar plates. The culture plates were incubated for 48 h at 37 degrees C and enumerated for the cfu (detection limit 10 cfu/mL). The results showed all copper ion concentrations tested (0.1-0.8 mg/L) achieved more than 99.999% reduction of P. aeruginosa which appears to be more susceptible to copper ions than S. maltophilia and A. baumannii. Silver ions concentration of 0.08 mg/L achieved more than 99.999% reduction of P. aeruginosa, S. maltophilia and A. baumannii in 6, 12 and 96 h, respectively. Combination of copper and silver ions exhibited a synergistic effect against P. aeruginosa and A. baumannii while the combination exhibited an antagonistic effect against S. maltophilia. Ionization may have a potential to eradicate P. aeruginosa, S. maltophilia and A. baumannii from hospital water systems.     

Regional science: back to the future?

After initiating a provocative discussion on “regional science in crisis” (Bailly and Coffey 1994; Gibson 1994; Plane 1994; Stough 1994; Anas 1994; Vickerman 1994; Casetti 1995), we now wish to present some additional thoughts on how regional scientists can simultaneously make their field more relevant scientifically and more useful for society. At a time when resources are tight, when the number of regional science students is small, when administrators are scrutinizing our budgets and our ability to generate outside money, we need to do something to regain (or is it simply to gain?) our place in the sun. In this paper, we argue that regional scientists will not reestablish their field by using classical approaches to regional analysis alone. It is essential that we look at new ways to answer questions raised by our social, economic, and political institutions. More specifically, we make some observations concerning the history of regional science, its role within universities, and its nature, as well as offering some suggestions concerning how regional scientists can attempt to improve the situation.     

Growth of straight, atomically perfect, highly metallic silicon nanowires with chiral asymmetry

In the quest of nano-objects for future electronics, silicon nanowires could possibly take over carbon nanotubes. Here we show the growth by self-organization of straight, massively parallel silicon nanowires having a width of 1.6 nm, which are atomically perfect and highly metallic conductors. Surprisingly, these silicon nanowires display a strong symmetry breaking across their widths with two chiral species that self-assemble in large left-handed and right-handed magnetic-like domains.     

Comparison of the characteristics of solar cells fabricated from multicrystalline silicon with those fabricated from silicon obtained by the monolike technology

In order to raise the efficiency of solar cells and reduce the cost of their production, a new process for obtaining silicon ingots based on the so-called moonlike technology is developed. New technologies, which use “solar-grade” silicon, make it possible to fabricate solar cells at a lower cost with a higher efficiency of solar-energy conversion. It is exactly for this reason that the “monolike” process was tested and optimized by us for Kazakhstan solar-grade silicon. The aim of this study is a comparison of the characteristics of solar cells fabricated from “monolike” silicon with those of solar cells obtained on the basis of multicrystalline silicon grown by oriented crystallization. For our study, ingots of multicrystalline silicon are grown on an industrial scale and through the use of Kazakhstan-sourced silicon; solar cells are fabricated and the characteristics of the obtained silicon ingots and solar cells are studied.     

Characterization of mid-infrared single mode fibers as modal filters

We present a technique for measuring the modal filtering ability of single mode fibers. The ideal modal filter rejects all input field components that have no overlap with the fundamental mode of the filter and does not attenuate the fundamental mode. We define the quality of a nonideal modal filter Q(f) as the ratio of transmittance for the fundamental mode to the transmittance for an input field that has no overlap with the fundamental mode. We demonstrate the technique on a 20 cm long mid-infrared fiber that was produced by the U.S. Naval Research Laboratory. The filter quality Q(f) for this fiber at 10.5 microm wavelength is 1000+/-300. The absorption and scattering losses in the fundamental mode are approximately 8 dB/m. The total transmittance for the fundamental mode, including Fresnel reflections, is 0.428+/-0.002. The application of interest is the search for extrasolar Earthlike planets using nulling interferometry. It requires high rejection ratios to suppress the light of a bright star, so that the faint planet becomes visible. The use of modal filters increases the rejection ratio (or, equivalently, relaxes requirements on the wavefront quality) by reducing the sensitivity to small wavefront errors. We show theoretically that, exclusive of coupling losses, the use of a modal filter leads to the improvement of the rejection ratio in a two-beam interferometer by a factor of Q(f).     

Keys to effective third-party process safety audits

The Occupational Safety and Health Administration's (OSHA's) Process Safety Management (PSM) regulation was promulgated in 1992. The U.S. Environmental Protection Agency's (EPA's) corresponding Risk Management Program (RMP) rule followed in 1996. Both programs include requirements for triennial compliance audits. Effective compliance audits are critical in identifying program weaknesses and ensuring the safety of facility personnel and the surrounding public. Large companies with corporate and facility health, safety, and environmental groups typically have the resources and experience to conduct audits internally, either through a corporate audit team or the sharing of personnel between multiple facilities. Small to medium sized businesses frequently do not have the expertise or the resources to perform compliance audits, and rely on third-party consultants to provide these services. This paper will discuss the observations of the authors in performing audits and working with PSM/RMP programs across a number of market sectors (e.g. chemical, petrochemical, pharmaceutical, food and beverage, water treatment), including effective practices, hurdles to successful implementation and execution of programs, and typical program shortcomings. The paper will also discuss steps to improve the audit process and increase effectiveness whether performed by a third party or internally.     

Fermentative bioenergy production from distillers grains using mixed microflora

The feasibility of hydrogen production from distillers grains substrate, an industrial cellulosic waste, was investigated. A substrate concentration of 80 g/L gave the maximum production at 50 °C and pH of 6.0 using sewage sludge. Four controllable factors with three levels: seed sludge (two sewage sludges and cow dung), temperature (40, 50, and 60 °C), pH (6, 7 and 8) and seed pretreatment (none, heat, and acid) were selected in Taguchi experimental design to optimize fermentation conditions. The peak hydrogen and ethanol productions were found with heat-treated cow dung seed, substrate concentration 80 g/L, 50 °C and pH 6. The peak hydrogen production rate and hydrogen yield were 7.9 mmol H₂/L/d and 0.40 mmol H₂/g-COD respectively whereas the peak ethanol production was 3050 mg COD/L and rate 0.22 g EtOH/L/d. A total bioenergy yield of 41 J/g substrate was obtained which was 21% and 79% from hydrogen and ethanol respectively.     

Fermentative biohydrogen production from starch-containing textile wastewater

The present study deals with the biohydrogen production from starch-containing wastewater collected from the textile industry in Taiwan. The effects of inoculums collected from different sources (sewage sludge, soil and cow dung), substrate concentrations (5–25 g COD/L) and pH (4.0–8.0) on hydrogen production from wastewater were investigated.