Investigating the effect of zirconium-based and titanium-based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis application

This study aims to investigate polysulfone (PSF) mixed matrix membranes (MMMs) properties containing zirconium-based and titanium-based metal–organic frameworks (MOFs). for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membrane characterization conducted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), field emission Scanning electron microscope (FE-SEM), energy-dispersive x-ray analysis (EDX), transmission electron microscopy (TEM), x-ray diffraction (XRD), and atomic force microscopy (AFM) confirmed the presence of MOF nanoparticles. Also, the evaluation of the specific surface area of nanoparticles was done by BET. The water contact angle reduced from 64.4° to 51.2°, indicating the hydrophilicity improvement, enhancing the pure water flux from 46.8 L/m²h for the pristine membrane to 76.7 L/m2h for the pristine membrane M₄. The total fouling resistance decreased from 30% to 21%, and the bovine serum albumin (BSA) adsorption of modified membranes was lower than that of the pristine membrane. Urea and creatinine were cleared significantly for modified ones, up to 82.6% and 72.1%, respectively, and all membranes showed BSA retention of more than 93%. A comparison between MMMs that contained UIO-66-NH₂ and MIL-125-NH₂ showed that the former had a better effect on the performance. M₄ had better results, indicating high water flux, the lowest fouling resistance, high porosity, lower BSA adsorption, proper clearance for urea and creatinine, and 94.2% BSA retention.     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Determination of 4-nonylphenol and 4-tert-octylphenol compounds in various types of wastewater and their removal rates in different treatment processes in nine wastewater treatment plants of Iran

Alkylphenols(APs), considered as xenoestrogenic compounds, mainly exist as 4-nonylphenol(4-NP) and 4-tertoctylphenol(4-t-OP) in environments. The high stability and accumulation of APs in aquatic systems have caused endocrine disruption. In this study we measured APs in the wastewater influent and effluent samples, from the urban, rural, livestock, commercial and hospital wastewater treatment plants(WWTPs) in Iran. Dispersive liquid–liquid microextraction(DLLME) combined with gas chromatography–mass spectrometry(GC–MS) was used for the extraction and determination of 4-NP and 4-t-OP. In these treatment plants, various processes such as activated sludge, aerated lagoon, moving bed biofilm reactor and activated sludge along with wetland were applied. The highest concentration of 4-NP and 4-t-OP was observed in commercial and livestock sewages. The activated sludge along with wetland and then the MBBR process showed the highest removal rates of pollutants. The rates of biodegradability and accumulation in sludge were determined and also the specific adsorption coefficient Kdand the organic carbon–water partition coefficient kOCof the sludge for APs were calculated.     

Densification improvement of spark plasma sintered TiB2-based composites with micron-, submicron- and nano-sized SiC particulates

Taguchi design of experiments methodology was used to determine the most influential spark plasma sintering (SPS) parameters on densification of TiB₂–SiC ceramic composites. In this case, four processing factors (SPS temperature, soaking time, applied external pressure and SiC particle size) at three levels were examined in order to acquire the optimum conditions. The statistical analysis identified the sintering temperature as the most effective factor influencing the relative density of TiB₂–SiC ceramics. A relative density of 99.5% was achieved at the optimal SPS conditions; i.e. temperature of 1800?°C, soaking time of 15?min and pressure of 30?MPa by adding 200-nm SiC particulates to the TiB₂ matrix. The experimental measurements and predicted values for the relative density of composite fabricated at the optimum SPS conditions and reinforced with the proper SiC particle size were almost similar. The mechanisms of sintering and densification of spark plasma sintered TiB₂–SiC composites were discussed in details.     

Cr2O3 nanoparticles: A promising candidate to improve the mechanical properties and corrosion resistance of Ni-Co alloy coatings

This study was aimed to assess the effects of reinforcement nanoparticles content, on the microstructural features, mechanical properties, and corrosion-related properties of Ni-Co-Cr₂O₃ nanocomposite coatings. Scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), and X-ray diffraction (XRD) analysis were employed in order to evaluate the microstructural features and chemical composition of the nanocomposites. Moreover, the microhardness tester and electrochemical impedance spectra (EIS) tests coupled with potentiodynamic polarization measurements were used to investigate the mechanical and corrosion-related properties, respectively. Results demonstrate that albeit the volume fraction of cobalt in coating, average particle size, Cr₂O₃ nanoparticle content in coating, and microstructural features are of prime significance in determining the mentioned properties of the nanocomposite coatings, Co content is more important. Actually, Cr₂O₃ nanoparticles serve as suitable nucleation sites for Co particles deposition throughout the microstructure. Thus, combined actions of Cr₂O₃ nanoparticles incorporation and their optimal content ensures the nucleation of high population of Co particles, which significantly contributes to the improvement in the properties. The Ni-Co-8.9 wt%Cr₂O₃ nanocomposite coating exhibits the superior mechanical and corrosion-related properties.     

Theoretical Study of the Doping Effects of n-type and p-type Silicon on the Surface Plasmon Resonance Using a 2D Grating

Silicon - A theoretical study on the excitation of surface plasmon (SP) through a 2D doping silicon gratingis present. Both n- and p-type doping silicon were used. The doping effects of n -type and...     

Use of axial dispersion model for determination of Sherwood number and mass transfer coefficients in a perforated rotating disc contactor

The mass transfer process in a perforated rotating disk contactor (PRDC) using a toluene-acetone-water system was investigated.The volumetric overall mass transfer coefficients are calculated in a PRDC column.Both mass transfer directions are considered in experiments.The influences of operating variables containing agitation rate,dispersed and continuous phase flow rates and mass transfer in the extraction column are studied.According to obtained results,mass transfer is significantly dependent on agitation rate,while the dispersed and continuous phase flow rates have a minor effect on mass transfer in the extraction column.Furthermore,a novel empirical correlation is developed for prediction of overall continuous phase Sherwood number based on dispersed phase holdup,Reynolds number and mass transfer direction.There has been great agreement between experimental data and predicted values using a proposed correlation for all operating conditions.     

Infrared thin layer drying of saffron (Crocus sativus L.) stigmas: Mass transfer parameters and quality assessment

Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass transfer parameters of saffron stigmas is available in the literature. This study aimed at investigating the moisture transfer parameters and quality attributes of saffron stigmas under infrared treatment at different temperatures(60,70, …, 110 °C). It was observed that the dehydration process of the samples occurred in a short accelerating rate period at the start followed by a falling rate period. The effective moisture diffusivity and convective mass transfer coefficient were determined by using the Dincer and Dost model. The diffusivity values varied from1.1103 × 10~(-10)m~2·s~(-1)to 4.1397 × 10~(-10)m~2·s~(-1) and mass transfer coefficient varied in the range of 2.6433 × 10~(-7)–8.7203 × 10~(-7)m·s~(-1). The activation energy was obtained to be 27.86 k J·mol~(-1). The quality assessment results showed that the total crocin content increased, when the temperature increased up to90 °C but, in higher temperatures, the amount of crocin decreased slightly. The total safranal content of the samples decreased slightly when drying temperature increased from 60 °C to 70 °C and then continuously increased up to 110 °C. Also, the amount of picrocrocin increased from 83.1 to 93.3 as the drying temperature increased from 60 °C to 100 °C.