A quadratic optimization method for connectivity and coverage control in backbone-based wireless networks

The use of directional wireless communications to form flexible mesh backbone networks, which provide broadband connectivity to capacity-limited wireless networks or hosts, promises to circumvent the scalability limitations of traditional homogeneous wireless networks. The main challenge in the design of directional wireless backbone (DWB) networks is to assure backbone network requirements such as coverage and connectivity in a dynamic wireless environment. This paper considers the use of mobility control, as the dynamic reposition of backbone nodes, to provide assured coverage-connectivity in dynamic environments. This paper presents a novel approach to the joint coverage-connectivity optimization problem by formulating it as a quadratic minimization problem. Quadratic cost functions for network coverage and backbone connectivity are defined in terms of the square distance between neighbor nodes, which are related to the actual energy usage of the network system. Our formulation allows the design of self-organized network systems which autonomously achieve energy minimizing configurations driven by local forces exerted on network nodes. The net force on a backbone node is defined as the negative energy gradient at the location of the backbone node. A completely distributed algorithm is presented that allows backbone nodes to adjust their positions based on information about neighbors’ position only. We present initial simulation results that show the effectiveness of our force-based mobility control algorithm to provide network configurations that optimize both network coverage and backbone connectivity in different scenarios. Our algorithm is shown to be adaptive, scalable and self-organized.     

Measurements on a 215-GHz subharmonically pumped waveguide mixerusing planar back-to-back air-bridge Schottky diodes

This paper presents design and performance data for a 215-GHz subharmonically pumped waveguide mixer using an antiparallel-pair of planar air-bridge-type GaAs Schottky-barrier diodes. The waveguide design is a prototype for a 640-GHz system and uses split-block rectangular waveguide with a 2:1 width-to-height ratio throughout. The measured mixer noise and conversion loss are below that of the best reported whisker contacted or planar-diode mixers using the subharmonic-pump configuration at this frequency. In addition, the required local oscillator power is as low as 3 mW for the unbiased diode pair, and greater than 34 dB of LO noise suppression is observed. Separate sideband calibration, using a Fabry-Perot filter, indicates that the mixer can be tuned for true double sideband response at an intermediate frequency of 1.5 GHz. Microwave scale model measurements of the waveguide mount impedances are combined with a mixer nonlinear analysis computer program to predict the mixer performance as a function of anode diameter, anode finger inductance, and pad-to-pad fringing capacitance. The computed results are in qualitative agreement with measurements, and indicate that careful optimization of all three diode parameters is necessary to significantly improve the mixer performance     

Radiosynthesis and biodistribution of [^18F]-tetracosactide using a semi-automated [^18F]SFB production module

In order to prepare a specific melanocortin type 2 receptor (MC2R) ligand, b1-24-corticotrophin was pre-pared in one-step reaction with [18F] SFB and b-1-24-corticotrophin pharmaceutical solution (1 mg/mL, pH=6.5). [18F]SFB was prepared in a semi-automated module in two steps with an overall radiochemical yield of 47% to EOB (not-decay corrected) in 90 min. The 18F-labeled intermediates and 18F-labeled peptide was checked by RTLC and HPLC. The results show that the radiochemical purity is >95% and the yield to EOB (not-decay corrected) is 29% for final 18F-labeled peptide at optimized conditions. Preliminary in vivo studies in normal mice were performed to deter-mine biodistribution of the 18F-labeled peptide for 150 min. The results show that the major tracer uptake is consistent with the natural distribution of MC2R receptors in mammals. Testes/blood and testes/muscle ratios for 18F-labeled peptide at 150 min were 184 and 1.56, respectively, and adipocyte/blood and adipocyte/muscle ratios at 120 min were 221 and 142, respectively. The data support the specific receptor binding of the radiolabeled peptide as reported for MC2R receptor accumulation in adipocytes and testes and demonstrates the retention of biological activity of the pep-tide. This tracer can be used in detection of MC2R distribution in malignancies and sex organ diseases.     

Methacrylate-functionalized POSS as an efficient adhesion promoter in olefin-based adhesives

This study aims to investigate the effects of methacrylate-functionalized polyhedral oligomeric silsesquioxane (MA-POSS) on polyolefin-based adhesives. The so called adhesive was synthesized by the cooligomerization of 1-decene/9-decene-1-ol monomers using a Ti amine bis-phenolate catalyst, [Ti{2,2′-(OC₆H₂-4,6-^tBu₂)₂NHC₂H₄NH(OⁱPr)₂], which was subsequentlyacrylated via a simple reaction with methacryloyl chloride. Different weight fractions of MA-POSS nanoparticles were solution blended with synthesized adhesive and undergone curing reaction with blue light. Observation of a unique tan δ peak in dynamic mechanical thermal analysis (DMTA) curve was clear evidence that two employed moieties were miscible and only one hybrid polymeric phase was created. Most noticeably, significant increase in mechanical parameters was detected in the lower inclusion compositions, 0.2-1 wt% of MA-POSS, where flexural strength and flexural modulus were increased up to 99 and 110%, respectively. Furthermore, thermal stability of the synthesized nanocomposite enhanced dramatically by increasing MA-POSS weight fraction. Influence of employed nanoparticles on adhesion properties of synthesized nanocomposites was evaluated with tensile shear bond strength and pull off analysis. According to the adhesion results, the MA-POSS causes an adhesion promotion on the fabricated adhesive/POSS nanocomposites.     

Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

Development of a Robust Carrier Synchronizer for High Dynamic and Low Signal to Noise Ratio Signals in GPS Receivers

Wireless Personal Communications - In this paper, a robust carrier recovery loop for high dynamic and weak signals in GPS receivers is proposed. To achieve optimal tracking performance at...     

Rotational and axial flow of pseudoplastic fluids

Mechanics of Time-Dependent Materials - Effects of a controllable axial flow on the stability of rotational flow of pseudoplastic fluids in the gap between concentric cylinders are studied. It is...     

Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.