Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction

Nano‐sized polyhedral oligomeric silsesquioxane (POSS) diol or ethylene glycol (EG) as diol monomer was incorporated into hydroxyl‐terminated polybutadiene (HTPBD) chain in the presence of fumaryl or thionyl chloride as extenders. Using these polyesterification reactions, two fumarate‐based polyesters and two polyester sulfites were synthesized. Each couple of polyesters and polyester sulfites includes a linear (diol:EG) and a nanohybrid macromer (diol:POSS). Full structural characterization was performed using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies. Gel permeation chromatography was undertaken to study polyesterification mechanisms by deconvolution of the obtained traces. Finally, differential scanning calorimetry, thermogravimetric analysis and cell culture were performed to evaluate the structure–property relationship for the synthesized macromers in comparison with unreacted HTPBD. © 2016 Society of Chemical Industry     

Surfactant‐Free Sub‐2 nm Ultrathin Triangular Gold Nanoframes

Ultrathin triangular gold nanoframes are synthesized in high yield through selective gold deposition on the edges of triangular silver nanoprisms and subsequent silver etching with mild wet etchants. These ultrathin gold nanoframes are surfactant‐free with tailorable ridge thickness from 1.8 to 6 nm and exhibit adjustable and distinct surface plasmon resonance bands in the visible and near‐IR region. In comparison, etching of the nanoprism template by galvanic replacement can only create frame structures with much thicker ridges, which have much lower catalytic activity for 4‐nitrophenol reduction than the ultrathin gold nanoframes.     

Zinc oxide nanoparticles: solvent-free synthesis,characterization and application as heterogeneous nanocatalyst for photodegradation of dye from aqueous phase

In present study, for the first time, ZnO nanoparticles have been synthesized via a simple, novel, solvent and template free solid-state thermal decomposition of the mixed Zn(NO₃)·6H₂O and cochineal powders as a novel starting reagent at 600?°C for 3 h. The as-prepared product was analyzed by XRD, EDS, SEM, TEM, FT-IR and DRS. Besides, the effect of cochineal powder on the morphology and particle size of ZnO nanoparticles was investigated. The results exhibited that cochineal powder prevents the sintering of nanoparticles and leads to formation of uniform particles. Moreover, the efficiency of ZnO nanoparticles as a photocatalyst for the decolorization of methylene orange (MO) has been evaluated and 90% degradation of MO was obtained after 120 min.     

Influence of various surface treated silica nanoparticles on the electrochemical properties of SiO2/polyurethane nanocoatings

Various organosilane-treated SiO₂ nanoparticles were dispersed in a 2-pack polyurethane coating. The influence of surface modification and silica content on the electrochemical behaviour of the resultant nanocoatings was investigated. Electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) variations were examined. The surface chemistry of nanoparticles and its effect on the resultant nanocoating morphology were also studied utilising FTIR, and TEM analyses. The results reveal that the presence of more hydrophobic groups and longer-lengthed hydrophobic chains on the surface of nanoparticles, greatly improves the interfacial interactions at the polymer/filler interfaces resulting in a better corrosion performance.     

Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint

To study the effect of chemical composition on microstructural features and mechanical properties of dissimilar joints between super duplex and austenitic stainless steels, welding was attempted by gas tungsten arc welding process with a super duplex (ER2594) and an austenitic (ER309LMo) stainless steel filler metal. While the austenitic weld metal had vermicular delta ferrite within austenitic matrix, super duplex stainless steel was mainly comprised of allotriomorphic grain boundary and Widmanstätten side plate austenite morphologies in the ferrite matrix. Also the heat-affected zone of austenitic base metal comprised of large austenite grains with little amounts of ferrite, whereas a coarse-grained ferritic region was observed in the heat-affected zone of super duplex base metal. Although both welded joints showed acceptable mechanical properties, the hardness and impact strength of the weld metal produced using super duplex filler metal were found to be better than that obtained by austenitic filler metal.     

Inverse Identification of Thermal Properties of Charring Ablators

The modified Levenberg-Marquardt method is used for simultaneous estimation of decomposition kinetic coefficients and temperature-dependent thermophysical properties of charring ablators with a moving boundary over a wide temperature range. No prior information is used for the functional forms of the unknown thermal conductivity and specific heat. The procedure used differs from the traditional one in that it does not require prescribed time-dependent surface heat flux, recession rate, and pyrolysis gas mass flow rate. These time-dependent quantities may recover during an iterative procedure. The measured temperatures are simulated numerically by the Charring material ablation code, which accounts for unsteady ablation. The method can determine unknown parameters in an efficient manner with reasonable accuracy, without exact advance knowledge about the net surface heat flux, surface recession, and gas flux through the material.     

Control of Hybrid Active Power Filter Based on Switching Function Coefficients

A pulse width modulation (PWM)-based control method for a three-level, four-wire neutral point clamped (NPC) inverter employed in a hybrid active power filter (HAPF) is proposed in this paper. The control method is based on switching function coefficients (SFCs) for harmonic compensation. An interior loop is also proposed for control and balancing of the DC-link voltages. In the proposed control system, one carrier signal is employed in the PWM unit in order to simplify its hardware as compared with traditional PWMs. Based on Fourier decomposition technique, mathematical analysis of the proposed control method is also presented. To decrease the NPC inverter rated power, passive power filters (PPFs) are designed to eliminate fifth and seventh order harmonic currents and to compensate source reactive currents. The proposed control system is implemented by a digital signal processing (DSP) in a laboratory prototype. The experimental results confirmed the validity of the proposed control method in compensation of harmonic currents under non-linear conditions     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.