Novel conductive magnetic nanocomposite based on poly (indole-co-thiophene) as a hemoglobin diagnostic biosensor: Synthesis,characterization and physical properties

The novel conductive nanocomposite has been successfully prepared by emulsion polymerization. First, magnetite nanoparticles were synthesized via coprecipitation reaction. Then, poly (indole-co-thiophene)@Fe₃O₄ nanocomposite was prepared via emulsion copolymerization of indole and thiophene monomers using sodium dodecyl sulfate as an emulsifier and ammonium persulfate as an oxidant in the presence of Fe₃O₄ nanoparticles. Characterization of the synthesized copolymer, Poly (In-co-T), and its magnetic nanocomposite were studied by Fourier transform infrared spectra, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetric, UV-vis spectrophotometer, and vibrating sample magnetometer. Also, the electrical conductivity of copolymer and nanocomposite were determined by four-probe instrument. Results showed a synergic effect in thermal stability by good interaction between polymer chain and magnetic nanoparticles. The conductivity of the nanocomposite was higher than bare copolymer, and increase of nanoparticles content caused an increment in the conductivity of the nanocomposites. The applicable properties of proposed conductive nanocomposite as a base at electrochemical biosensing have been investigated.     

Amine corrosion and amine cracking of API 5L X52 carbon steel in the presence of hydrogen sulphide and carbon dioxide

In this research, stress corrosion cracking (SCC) and corrosion behaviour of API 5L X52 carbon steel in 25?wt-% diethanolamine solution, saturated/unsaturated with carbon dioxide and containing 0 and 200?ppm hydrogen sulphide at different temperatures were investigated using slow strain rate test, electrochemical measurement and microscopic analysis. In addition, the presence of heat stable amine salts (HSASs) in the test solution was studied using spectrophotometry and Fourier transform infra-red spectroscopy. Analysis of the results showed that the primary components to form HSASs exist in the solution. The results indicated that SCC is more likely in solutions without amine. Increase in corrosion rate of carbon steel by increase in temperature was clearly observed and concluded that the simultaneous presence of hydrogen sulphide and carbon dioxide in the solution can increase the corrosion rate of carbon steel more than having one of the gases in the solution.     

Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Vulcanization kinetics of nano-silica filled styrene butadiene rubber

It was shown that the physical filler-polymer and filler–filler interactions, apart from the filler surface chemistry, has a substantial role in controlling the vulcanization kinetics of styrene butadiene rubber filled with nano-silica in a sulfur vulcanization system. Kinetic studies by the oscillating disc rheometer, differential scanning calorimeter, and swelling tests revealed that the vulcanization rate goes through a maximum as loading of silica increases, but conversion in crosslinking continuously decreases as the amount of silica increases. The effect of silica loadings on the vulcanization reactions was linked to the immobilization of rubber chains around particles as well as in a polymer-mediated filler network, which were differentiated by the nonlinear viscoelastic behavior of rubber vulcanizates. By surface modification of nano-silica, the accelerating/decelerating effects of nano-silica on the vulcanization reactions were altered corresponding to the non-linear viscoelastic behavior of the vulcanizates. Therefore, a mechanism was proposed which correlates vulcanization kinetics of rubber to the dynamics of chains influenced by the reinforcing fillers.     

Radiosynthesis and biodistribution of [^18F]-tetracosactide using a semi-automated [^18F]SFB production module

In order to prepare a specific melanocortin type 2 receptor (MC2R) ligand, b1-24-corticotrophin was pre-pared in one-step reaction with [18F] SFB and b-1-24-corticotrophin pharmaceutical solution (1 mg/mL, pH=6.5). [18F]SFB was prepared in a semi-automated module in two steps with an overall radiochemical yield of 47% to EOB (not-decay corrected) in 90 min. The 18F-labeled intermediates and 18F-labeled peptide was checked by RTLC and HPLC. The results show that the radiochemical purity is >95% and the yield to EOB (not-decay corrected) is 29% for final 18F-labeled peptide at optimized conditions. Preliminary in vivo studies in normal mice were performed to deter-mine biodistribution of the 18F-labeled peptide for 150 min. The results show that the major tracer uptake is consistent with the natural distribution of MC2R receptors in mammals. Testes/blood and testes/muscle ratios for 18F-labeled peptide at 150 min were 184 and 1.56, respectively, and adipocyte/blood and adipocyte/muscle ratios at 120 min were 221 and 142, respectively. The data support the specific receptor binding of the radiolabeled peptide as reported for MC2R receptor accumulation in adipocytes and testes and demonstrates the retention of biological activity of the pep-tide. This tracer can be used in detection of MC2R distribution in malignancies and sex organ diseases.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

辊速差对连铸连轧7075铝板显微组织、 织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响.采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验.结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5％和21.9％.此外,当辊...     

Effect of Various On-Farm Water Management Scenarios on Equity and Productivity in Irrigation Networks

This research investigated the optimum on-farm water management methods for a summer crop (Maize). Water equity and productivity were optimized simultaneously by using genetic algorithms in Doroodzan Irrigation Network. Increase in water reduction fraction (WRF) (0.0 to 0.8) has the incremental effect on water equity (on average 19.4 %), however by increasing WRF, water productivity initially increased (on average 25.3 % at WRF?=?0.4) and then decreased. With increasing irrigation application efficiency (E_a) (40 to 90 %), the values of water equity and productivity increased by on average 52.8 and 91.5 %, respectively. Increment of conveyance efficiency of channels (E_c) (70 to 90 %) resulted in minimum incremental effect on water equity and productivity (on average 18.5 and 11.9 %, respectively). Furthermore, the values of performance measure decreased from wet water year to drought water year. Tape irrigation system was considered as the best choice at low quantities of WRF (<=0.4), however for higher values of WRF (>?=?0.6), sprinkler irrigation system was considered as the best choice for achieving higher values of water equity and productivity. Meanwhile, when equity and productivity were considered together for a specific method of deficit irrigation scheduling, under specified quantity of irrigation water, with increasing equity the water productivity reduction was negligible.     

Energy and exergy analyses of five conventional liquefied natural gas processes

In this paper, five conventional LNG processes were investigated by energy and exergy analysis methods. On the basis of the energy analysis, three‐stage process of Linde AG and Stat oil (mixed fluid cascade [MFC]) has less energy consumption than the other ones (0.254 kWh/kg liquefied natural gas). Also, coefficient of performance of the cycles of this process is higher compared with the other ones. Exergy analysis results showed that the maximum exergy efficiency is related to the MFC process (51.82%). However, performance of the MFC process in terms of quality and quantity of energy consumption is considerable. But using three cycles in this process needs more components and consequently more fixed costs. In this study, sensitivity of coefficient of performance, specific energy consumption, and indexes of exergy analysis were also analyzed versus important operating variables for all cases. Copyright © 2014 John Wiley & Sons, Ltd.