Preparation of tailor‐made polystyrene nanocomposite with mixed clay‐anchored and free chains via atom transfer radical polymerization

Tailor‐made polystyrene nanocomposite with mixed free and clay‐attached polystyrene chains was synthesized using atom transfer radical polymerization. Vinylbenzyl trimethylammonium chloride having a double bond, which could be incorporated into polystyrene chains by a grafting through process, was used as a nanoclay modifier. Conversion and molecular weight evaluation was carried out using gas chromatography and gel permeation chromatography, respectively. The thermogravimetric analysis results confirmed the elevated thermal stability of the nanocomposites in comparison with the neat polystyrene sample. Additionally, the T_g increases by clay loading was confirmed by differential scanning calorimetry (DSC). The difference in the degradation temperature of C? Br bond in attached and free polystyrene chains was well revealed in DSC thermograms. Finally, a lower clay loading resulted in an exfoliated structure as proved by X‐ray diffraction and transmission electron microscopy results. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Efficient Synthesis of α-Monoglycerides via Solventless Condensation of Fatty Acids with Glycerol Carbonate

Highly pure α-monoglycerides (5a–e) were successfully prepared in high yields by the condensation of fatty acids such as lauric, myristic, palmitic, stearic and oleic (2a–e) with glycerol carbonate (4-hydroxymethyl-1,3-dioxolan-2-one) (1) in the presence of triethylamine as catalyst. Reaction conditions and spectroscopic identification of products will be presented in this article.     

Kinetic study of styrene atom transfer radical polymerization from hydroxyl groups of graphene nanoplatelets: Heterogeneities in chains and graft densities

Confinement effect of graphene nanoplatelets on the kinetics of styrene atom transfer radical polymerization was studied by a “grafting from” reaction. Graphene oxide was modified by different amounts of (3‐aminopropyl) triethoxysilane and then alpha‐bromoisobutyryl bromide from the hydroxyl groups. Polymerization of styrene in the presence of modified graphene and free initiator, ethyl alpha‐bromoisobutyrate, was accomplished at 110°C. Then, effect of various graft densities and different graphene loadings on the heterogeneous graft and free polystyrene chains characteristics and also kinetics of polymerization was studied by gas and gel permeation chromatographies. Efficiency of grafting reactions along with the graft contents was studied by X‐ray photoelectron spectroscopy, elemental analysis, and thermogravimetric analysis. Confinement effects of graphene on the relaxation behavior of polystyrene chains and also morphology of the graphenes were studied by differential scanning calorimetry and transmission electron microscopy, respectively. POLYM. ENG. SCI., 55:1720–1732, 2015. © 2014 Society of Plastics Engineers     

Evolution of vinyl chloride conversion below critical micelle concentration: A response surface analysis

Utilizing response surface methodology, the conversion of vinyl chloride monomer (VCM) was monitored when the polymerization temperature, the type of surfactant, and the weight ratio of water‐to‐monomer (W/M) were taken as the emulsion polymerization variables. Because the homogeneous nucleation was found to be the dominant mechanism in VCM emulsion polymerization, irrespective of the surfactant concentration, the whole experiments have been carried out below critical micelle concentration of the used surfactants. Among all the studied variables, the polymerization temperature appeared as the most effective parameter; moreover, its interactive effect with W/M caused different trends in the alteration of final conversion being observed. Also, depending on the reaction temperature, the VCM conversion would be affected by the type of the surfactant used. Contrarily, simultaneous change in the type of surfactant and W/M revealed an insignificant effect on the evolution of VCM conversion. The optimization of final conversion of VCM was also accessible through contour plots of response surface methodology. It is worth noting that, taking a conventional approach into consideration, the alteration of VCM conversion seemed to be a monotonic function of temperature. J. VINYL ADDIT. TECHNOL., 21:157–165, 2015. © 2014 Society of Plastics Engineers     

Synthesis,Characterization, and Bioactivity Evaluation of Amorphous and Crystallized 58S Bioglass Nanopowders

The aim of this work was synthesis and characterization of amorphous and crystallized 58S nanopowders produced via sol‐gel method. According to the thermal analysis, the nanopowders were heat‐treated at 600°C and 1100°C. X‐ray diffraction results revealed that the phases of Wollastonite and tricalcium phosphate were formed at 1100°C. The in vitro tests showed that hydroxyl carbonate apatite was precipitated on both crystallized and amorphous nanopowders, while amorphous nanopowder showed a higher bioactivity than that of crystallized nanopowder. In contrast, mechanical properties of crystallized specimen were higher than those of amorphous specimen.     

Effect of different modified nanoclays on the kinetics of preparation and properties of polymer-based nanocomposites

Polymer-clay nanocomposites have been prepared by free radical and RAFT polymerizations. To investigate the effects of nanoclay content and its modification system on the kinetics of polymerization, two different commercial grades of clay including Na-MMT and Cloisite 30B have been used and a method has been developed for further modification of Na-MMT with two commercial modifiers containing either a long organic chain or a vinyl group. Also, kinetics of free radical and RAFT polymerizations of both styrene and methyl methacrylate in the presence of these nanoclays was studied. Morphology of the nanocomposites has been studied by XRD and the results have been assessed with TEM observations. Exfoliated structure was obtained for the nanocomposites with 1?wt.% of vinyl-containing clays. Thermogravimetric behavior of the nanocomposites has been studied by TGA. Incorporation of clays has resulted in an evident increase in thermal stability of both polymers.     

Microwave Synthesis and Characterization of Spinel-type Zinc Aluminate Nanoparticles

In the present work, ZnAl₂O₄ nanoparticles have been synthesized with the aid of Zn(OAc)₂·2H₂O and Al(NO₃)₃·9H₂O as starting reagents in the presence of microwave irradiation. Besides, the effect of preparation parameters such as microwave power and irradiation time on the morphology and particle size of products was studied by SEM images. The as-prepared ZnAl₂O₄ nanoparticles were characterized extensively by techniques like XRD, TEM, SEM, FT-IR, PL, and EDS. Photoluminescence studies of the ZnAl₂O₄ nanoparticles displayed quantum confinement behavior with band gap of 3.2 eV. The XRD studies showed that pure orthorhombic ZnAl₂O₄ nanoparticles have been produced after calcination.