Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Photocatalytic degradation of diclofenac using hybrid MIL-53(Al)@TiO2 and MIL-53(Al)@ZnO catalysts

In this work, TiO₂ and ZnO were incorporated successfully into a MIL-53(Al) metal–organic framework (MOF) to form nanocomposites via a facile post-modification technique. The hybrid MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO were characterized by several characterization tests. The X-ray diffraction (XRD), Fourier-transform infrared (FTIR), and field-emission scanning electron microscopy (FE-SEM) analyses showed evidence of the successful incorporation of TiO₂ and ZnO within the MIL-53(Al) framework. The thermal gravimetric analysis (TGA) analysis demonstrated the excellent thermal stability of MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO, while diffuse reflectance spectroscopy (DRS) determined the direct optical band gaps of MIL-53(Al)@ZnO and MIL-53(Al)@TiO₂ to be 3.24 and 3.34 eV, respectively. The composites were also tested for the photocatalytic degradation of diclofenac (DCF) as a micropollutant. The DCF degradation efficiency of the photocatalysts was ranked in the following order: MIL-53(Al)@TiO₂ > MIL-53(Al) > TiO₂ > ZnO > MIL-53(Al)@ZnO. The incorporation of TiO₂ enhanced the optical properties of MIL-53 (Al), which was confirmed with the superior photodegradation efficiency of MIL-53(Al)@TiO₂ (>85% in 2 h) as compared to the pristine MIL-53(Al) (around 80% in 2 h). The improvement in the photodegradation of the hybrid-MOF is mostly associated with the possible dual function of the adsorption and photodegradation mechanisms. The reusability of MIL-53(Al) and its composites was inspected over 3 cycles of photodegradation experiments with DCF. The photocatalytic activity of MIL-53(Al)@TiO₂ remained unchanged (>90%), while for MIL-53(Al) and MIL-53(Al)@ZnO a slight drop was observed over three cyclic degradation experiments. Fluorescence measurements revealed that the hydroxyl radical is an important reactive oxygen species produced by all the photocatalysts that aid in the photodegradation of DCF. Furthermore, the kinetic modelling of the photoreaction identified a second-order kinetics for all catalysts. Experiments with scavengers showed that hydroxyl radicals played a major role in the photocatalytic process, and it was found that only 2 h of treatment was sufficient to obtain a considerable chemical oxygen demand (COD) reduction of 58%.     

Investigating the effect of zirconium-based and titanium-based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis application

This study aims to investigate polysulfone (PSF) mixed matrix membranes (MMMs) properties containing zirconium-based and titanium-based metal–organic frameworks (MOFs). for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membrane characterization conducted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), field emission Scanning electron microscope (FE-SEM), energy-dispersive x-ray analysis (EDX), transmission electron microscopy (TEM), x-ray diffraction (XRD), and atomic force microscopy (AFM) confirmed the presence of MOF nanoparticles. Also, the evaluation of the specific surface area of nanoparticles was done by BET. The water contact angle reduced from 64.4° to 51.2°, indicating the hydrophilicity improvement, enhancing the pure water flux from 46.8 L/m²h for the pristine membrane to 76.7 L/m2h for the pristine membrane M₄. The total fouling resistance decreased from 30% to 21%, and the bovine serum albumin (BSA) adsorption of modified membranes was lower than that of the pristine membrane. Urea and creatinine were cleared significantly for modified ones, up to 82.6% and 72.1%, respectively, and all membranes showed BSA retention of more than 93%. A comparison between MMMs that contained UIO-66-NH₂ and MIL-125-NH₂ showed that the former had a better effect on the performance. M₄ had better results, indicating high water flux, the lowest fouling resistance, high porosity, lower BSA adsorption, proper clearance for urea and creatinine, and 94.2% BSA retention.     

Siloxane‐based segmented poly(urethane‐urea) elastomer: Synthesis and characterization

A series of segmented poly(urethane‐urea) block copolymers were synthesized with varying proportions of polydimethylsiloxane diols in combination with polytetramethylene ether glycol (PTMG) using 4,4'‐methylenediphenyl diisocyanate followed by chain extension with a (50:50 mol %) mixture of 4,4'‐methylene‐bis(3‐chloro‐2,6‐diethylaniline) (M‐CDEA) and 1,4‐butanediol (BD). The molecular structures of polydimethylsiloxane urethane‐ureas were characterized by ATR‐FTIR and ¹H‐NMR spectroscopic techniques. Distribution of siloxane domain and its influence on surface roughness were investigated by scanning electron microscopy (SEM) and atomic forced microscopy (AFM), respectively. The mechanical and thermal properties of the elastomers were studied by thermogravimetric analysis, dynamical mechanical thermal analysis, and tensile measurement. The results showed that by incorporation of polydimethylsiloxane diol and M‐CDEA chain extender in polyurethane formulation, some improvements in thermal stability, fire resistance and surface hydrophilicity were achieved. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1743–1751, 2013     

The effects of processing parameters on formation of nano-spinel (MgAl2O4) from LiCl moltensalt

Nano-MgAl₂O₄ particles were successfully synthesized at 850 °C using the molten-salt method, and the effects of processing parameters, such as temperature, holding time and amount of salt on the crystallization of MgAl₂O₄ were investigated. Nano-alumina, magnesia and lithium chloride were used as starting materials. LiCl molten salt provided a liquid medium for reaction of Al₂O₃ and MgO to form MgAl₂O₄. The results demonstrated that MgAl₂O₄ started to form at about 650 °C and that, after the temperature was increased to 1000 °C, the amounts of MgAl₂O₄ in the resultant powders increased with a concomitant decrease in Al₂O₃ and MgO contents. After washing with hot-distilled water, the samples heated for 3 h at 850 °C were single-phase MgAl₂O₄ with 30–50 nm particle size. Furthermore, the synthesized MgAl₂O₄ particles retained the size and morphology of the Al₂O₃ powders, which indicated that a template formation mechanism dominated the formation of MgAl₂O₄ by molten-salt method.     

Charged Particle Trajectory Statistics and Deposition in a Turbulent Channel Flow

The statistical properties of charged particles and their wall deposition in a turbulent channel flow in the presence of an electrostatic field is studied in this paper. For a dilute concentration, the influence of small particles on the fluid motion is neglected. The instantaneous velocity field is generated by a direct numerical simulation of the Navier-Stokes equation via a pseudospectral method. The case in which each particle carries a single unit of charge and the case in which the particles have a saturation charge distribution are analyzed. Ensembles of 8192 particle trajectories are used for evaluating various statistics. Effects of size and electric field intensity on particle trajectory statistics and wall deposition rate are studied. RMS particle velocities and particle concentrations at different distances from the wall are evaluated and discussed. The results for deposition rates are compared with those obtained from empirical equations.     

Efficient Degradation of a Biorecalcitrant Pollutant from Wastewater Using a Fluidized Catalyst-Bed Reactor

This study investigated the treatment of an azo dye, as a biorecalcitrant model, from industrial wastewater by using Cu/Mg/Al-chitosan in a fluidized catalyst-bed reactor. A number of variables were used to study the impact they had on the oxidation process involving azo dye. The maximum degradation of the azo dye was achieved at 7 g Cu/Mg/Al-chitosan. The chloride and sulfate ions had a synergistic effect on azo dye removal. The oxidation of the azo dye under the selected conditions was of pseudo-first-order. Textile wastewater could effectively be treated using a low concentration of about 7 g of Cu/Mg/Al-chitosan in a short hydraulic retention time of 10 min. The use of Cu/Mg/Al-chitosan demonstrated a promising method to eliminate the azo dye from the wastewater.     

Direct Numerical Simulation of Curly Fibers in Turbulent Channel Flow

Wall deposition of rigid-link fibrous aerosols in a turbulent channel flow is studied. The instantaneous turbulent velocity vector field is generated by the direct numerical simulation of the Navier-Stokes equation with the aid of a pseudospectral code. It is assumed that the fiber is composed of five rigidly attached ellipsoidal links. The dynamic behavior of these elongated and irregular shaped particles is markedly different from the spherical ones. The hydrodynamic forces and torques acting on the fiber are evaluated and the equations governing the translational and rotational motions of the fiber are analyzed. Euler's four parameters are used, and motions of fibrous particles in the turbulent channel flow field are studied. Ensembles of 8000 fiber trajectories are generated and are used for evaluating various statistics. Root mean-square fiber velocities and fiber concentrations at different distances from the wall are evaluated and discussed. Empirical models for the deposition rate of curly fibers are also developed. The model predictions are compared with the simulation data and good agreement is observed.