Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A variety of surface active compounds were synthesized by the quaternization of some straight chain amide derivatives with triethylamine or pyridine. Their structure FT-IR and ¹H-NMR spectra were recorded. In addition their physical properties and corrosion prevention efficiencies were investigated. All compounds were tested with steel coupons in acidic media by the gravimetric method. As acidic media 1.5 M HCl and 1.5 M H₂SO₄ were used and the corrosion inhibition tests fulfilled at room temperature for 24 h. Almost all prepared cationic surfactants showed efficient inhibition around their critical micelle concentrations. The effects of HCl concentration on corrosion inhibition of some synthesized compounds were also investigated. The corrosion tests were supported by contact angle measurements.     

Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique

Ceramic preforms with randomly distributed particles as reticulated porous structure which are generally used for metal infiltration as reinforcement, membranes, catalyst supports etc. Preforms are characterized by open porosity making possible their infiltration by liquid metal alloys. In this work, quartz powders using carbon black as a reducing agent were used for alpha Si₃N₄ powders synthesis through a carbothermal reduction and nitridation (CRN) process. The CRN process was carried out under nitrogen flow at 1,450 °C for 4 h. At high temperatures, carbon as reducing agent reacts with the oxygen of SiO₂, and the resulting metallic silicon compounds with nitrogen gas to obtain silicon nitride powder. The reacted powders were used to obtain reticulated ceramic by replica method. The powders containing various bentonite ratios were mixed in water to prepare slurry. The slurry was infiltrated into a polyurethane sponge. A high porous ceramic foam (preform) structure was achieved after burn out of the sponge. All ceramic preforms were sintered to increase stiffness (in the temperature range 900–1,350 °C). The sintered ceramic foams were subjected to compressive tests. The scanning electron microscopy was used to examine the reticulated ceramic foam structure, and X-ray diffraction analysis was performed to determine phases.     

Stepwise optimisation of enzyme production in solid state fermentation of waste bread pieces

When it is not consumed, bread presents a major source of food waste, both in terms of the amount and its economic value. However, bread also possesses the characteristics of an ideal substrate for solid state fermentation. Yet nearly all wasted bread ends up in landfill sites, where it is converted into methane by anaerobic digestion. Governments are finally taking action and, according to the EU Landfill Directive, for example, biodegradable municipal waste disposed into landfills must be decreased to 35% of 1995 levels, by 2020. Solid state fermentation of waste bread for the production of value added products is a novel idea, which could help with the achievement of this target. In this study, glucoamylase and protease production from waste bread pieces, via solid state fermentation, was investigated in detail. The optimum fermentation conditions for enzyme production were evaluated as, 20 mm particle size, 1.8 (w/w, db) initial moisture ratio, and duration of 144 h. Under these conditions, glucoamylase and protease activities reached up to 114.0 and 83.2 U/g bread (db), respectively. This study confirms that waste bread could be successfully utilised as a primary raw material in cereal based biorefineries.     

Synergistic effects of sono-alkaline pretreatment on anaerobic biodegradability of waste activated sludge

The individual and combined effects of alkaline and ultrasonic pretreatment on both physical and chemical properties and anaerobic biodegradability of waste activated sludge (WAS) were investigated comprehensively in this study. The experimental results showed that both disintegration and anaerobic biodegradability of WAS were significantly improved by the combination of alkaline and ultrasonic (sono-alkaline) pretreatment. Besides, it was determined that the hydraulic retention time in anaerobic digester can be shortened by half using this combined pretreatment. However, it was also determined that sono-alkaline pretreatment was not feasible economically due to its high energy requirement.     

The preparation of core–shell Al2O3/Ni composite powders by electroless plating

Core–shell nanostructured Ni-coated Al₂O₃ composite powders were synthesised by using the electroless plating method. The influence of the chemical components and powder concentration in the Ni coating was investigated by scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction techniques. The results show that the concentration of the plating components plays an important role in the formation of core–shell Al₂O₃/Ni composite powders. The nickel content in the composite powders could be effectively controlled by adjusting the nickel chloride content and the concentration of NaH₂PO₂·H₂O in the plating solution. The nanostructure of the crystalline Ni coatings was observed to be very attractive for achieving good bonding between ceramic particles and matrices for composite production.     

Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.     

Effect of clinoptilolite filler on the physical and mechanical properties of polypropylene

This study aims to investigate the mechanical and physical properties of polypropylene (PP) filled by natural zeolite. For this purpose, a natural zeolite (at 1–6 wt% filler loadings) with two different particle sizes was used. Two different kinds of silane coupling agents (3‐aminopropyltriethoxysilane, GAPTES and 3‐glycidoxypropyltrimethoxysilane, GPTMS) at three different volume ratios were used to improve the zeolite compatibility with PP and to improve the mechanical properties of composites. Fillers and PP were compounded with a twin screw extruder, and the composites were moulded with injection moulding press. The samples were subjected to mechanical tests (i.e., impact and tensile tests) and physical tests (i.e., hardness, density, and melt flow index, MFI). The physical test results showed that the levels of hardness and density of both unmodified and modified zeolite‐filled PP composites were higher compared with neat PP. The MFI values of composites were decreased by increasing zeolite loading level. Composites including GAPTES modified zeolite showed improved yield strength, impact strength and stiffness compared with composites filled with unmodified zeolite particles. POLYM. COMPOS. 34:1396–1403, 2013. © 2013 Society of Plastics Engineers     

Naphtha derived from polyolefins

Conversion of polyolefins (HDPE, LDPE and PP) into feedstock naphtha was investigated by hydroliquefaction process. Hydroliquefaction experiments were carried out under cold hydrogen pressure of 5 MPa at the temperatures between 375 and 450 °C in absence and presence of catalyst. Two types commercial catalysts were used, a hydrocracking catalyst (DHC-8) and a hydrogenation catalyst (HYDROBON). The effect of temperature and catalyst type on product yields and composition of gas and liquid products was investigated. The temperature was the main effect in hydroliquefaction. DHC-8 showed good cracking activity, but it gave the liquid product containing high olefin content same as thermal run. Although HYDROBON catalyst produced the sufficient amount of liquid (and naphtha fraction) at the higher temperature, it gave the liquid product with very low olefin content. The naphtha fractions obtained from polyolefins under the optimal hydrocracking conditions were analyzed by PIONA instrument to determine the hydrocarbon groups. PIONA analysis showed that the naphtha obtained from hydroliquefaction over HYDROBON catalyst could be used as a petrochemical feedstock. However, the naphtha obtained in presence of DHC-8 catalyst, which is to be used a feedstock, was needed further hydrogenation treatment.     

Enhanced Catalytic,Antibacterial and Anti-cancer Activities of Erythromycin Capped Gold Nanoparticles

Journal of Inorganic and Organometallic Polymers and Materials - In this study, the nanosized spherical erythromycin capped gold nanoparticles (eryth-Au(0)NPs) were fabricated for the first time....     

Integrative Analysis of Metabolomic,Proteomic and Genomic Data to Reveal Functional Pathways and Candidate Genes for Drip Loss in Pigs

The aim of this study was to integrate multi omics data to characterize underlying functional pathways and candidate genes for drip loss in pigs. The consideration of different omics levels allows elucidating the black box of phenotype expression. Metabolite and protein profiling was applied in Musculus longissimus dorsi samples of 97 Duroc × Pietrain pigs. In total, 126 and 35 annotated metabolites and proteins were quantified, respectively. In addition, all animals were genotyped with the porcine 60 k Illumina beadchip. An enrichment analysis resulted in 10 pathways, amongst others, sphingolipid metabolism and glycolysis/gluconeogenesis, with significant influence on drip loss. Drip loss and 22 metabolic components were analyzed as intermediate phenotypes within a genome-wide association study (GWAS). We detected significantly associated genetic markers and candidate genes for drip loss and for most of the metabolic components. On chromosome 18, a region with promising candidate genes was identified based on SNPs associated with drip loss, the protein “phosphoglycerate mutase 2” and the metabolite glycine. We hypothesize that association studies based on intermediate phenotypes are able to provide comprehensive insights in the genetic variation of genes directly involved in the metabolism of performance traits. In this way, the analyses contribute to identify reliable candidate genes.