Investigation of flow properties in natural streams using the entropy concept

This paper examines the discharge and velocity distributions in natural open channel flows using the entropy theory. Flow measurements were carried out at four different cross‐sections in central Turkey. The mean and maximum velocities at these stations exhibited a linear distribution and the entropy parameter was calculated to be M=1.31. Using this value, discharges for all flow conditions were calculated as a function of the measured maximum velocities (u_max). It was observed that the u_max/H and z_max/H ratios remained relatively constant when 0.2≤y/T≤0.8, especially for the wider channels. Using these constant values for each station, u_max and z_max could be determined solely as a function of the water depth H. Although the calculated velocities were higher than those measured at some verticals, the entropy‐based approach presents an attractive alternative to the traditional flow‐measurement techniques for the determination of flow properties because of its simplicity and quick application.     

The wind power potential of the eastern Mediterranean region of Turkey

The wind energy potential in the eastern Mediterranean region has been investigated using hourly wind data taken from seven stations during 1992-2001 periods by the Turkish Meteorological Service. The present work suggests that in the east Mediterranean Sea coast of Turkey, wind energy sources are convenient for electricity generation. The mean power density was determined as 500 W/m² in many areas of this region at 25 m from the ground level. The most promising locations in terms of wind power generation are identified. The contours of constant wind speed and power potential could lead the private power developers to decide the locations of appropriate wind farms.     

Effects and modelling of ultrasonic waste‐activated sludge disintegration

Sonication is a well‐known sludge pretreatment technique with the advantages of simple operation and high efficiency. However, it is an energy‐intensive process. Hence, it is very important to predetermine its sludge disintegration efficiency at varying pretreatment conditions in order to minimize the ultrasonic energy consumption. In this study, it was found that the ultrasonic sludge disintegration occurred in two stages: rapid and subsequent slow disintegration stages. For this reason, it was aimed to develop a simple and accurate mathematical model to describe the two‐stage sludge disintegration as a function of pretreatment conditions. Sludge concentration and ultrasonic density along with sonication period were involved in this model as independent variables. It was determined that the mathematical model can predict accurately the degree of sludge disintegration. Thus, the proposed model was seen to be very useful for evaluating the disintegration efficiency and/or for process design using the operating parameters under different conditions.     

An artificial neural network model for the prediction of critical submergence for intake in a stratified fluid medium

Density differences may occur because of temperature differentials, suspended sediments, dissolved salts or other chemicals. Most of the large surface reservoirs are stably stratified throughout most, or all, of the year. One of the means of assisting the management is to allow a selective withdrawal from the reservoir. And while an intake is used for withdrawal (from the lower layer), a maximum discharge is required not allowing the uptake of the upper layer fluids. The value of the intake's vertical distance from the upper layer elevation (submergence) when the upper layer fluids begin to be drawn into the intake is known as ‘critical submergence’. In this study, the critical submergence for a circular intake pipe in a stratified body (which has different layer thickness) is investigated. Experiments were conducted on a vertically flowing downward intake pipe in a still-water reservoir. Artificial neural network (ANN) models and formulas, which are found by the theoretical analysis of critical spherical sink surface (CSSS), are used for the analysis of experimental results. The CSSS has the same centre and discharge as the intake. The ANN model and CSSS results are compared with the experimental results.     

Effects of infills on high‐rise buildings: a case study

In this study, the effects of infill walls to the response of a selected building under earthquake loading were investigated. Although various suggestions have been offered, designers usually neglect the effect of infill walls on building behaviour when designing a building. In this study, the effects of infill walls on a building, which consists of two storeys of basement, one storey of ground floor, one storey of mezzanine floor and 10 storeys of flats, were investigated. Three‐dimensional models of the building with and without infill walls were modelled in SAP2000. Then, nonlinear time history analysis was performed on the models with and without infill walls. Infill walls were modelled both as mass and structural elements. The results of two analyses were compared. Consequently, the effect of infill walls on the behaviour of buildings such as period, maximum roof displacement, base columns end‐forces and soft‐storey formation coefficient was determined. Addition of infill wall to the structures caused changes in maximum roof displacement, modal periods, maximum base column end‐forces, shear force and soft‐storey formation coefficient. Copyright © 2008 John Wiley & Sons, Ltd.     

A new wireless asynchronous data communications module for industrial applications

All the sensors such as temperature, humidity, and pressure used in industry provide analog outputs as inputs for their control units. Wireless transmission of the data has advantages on wired transmission such as USB port, parallel port and serial port and therefore has great importance for industrial applications. In this work, a new wireless asynchronous data communications module has been developed to send the earth magnetic field data around a ferromagnetic material detected by a KMZ51 AMR sensor. The transmitter module transmits the analog data obtained from a source to a computer environment where they are stored and then presented in a graphical form. In this design, an amplitude shift keying (ASK) transceiver working at the frequency of 433.92 MHz which is a frequency inside the so called Industrial Scientific Medical band (ISM band) used for wireless communications. The analog data first fed into a 10-bit ADC controlled by a PIC microcontroller and then the digital data is sent to the transmitter. A preamble bit string is added in front of the data bits and another bit string for achieving synchronization and determination the start of the data is used. The data arriving at the receiver is taken by the microcontroller and sent to a LCD display as well as the serial port of a computer where it is written in a text file. A Visual Basic based graphics interface is designed to receive, store and present the data in the form of graphical shapes. In the paper, all the work has been explained in detail.     

Determination of Myricetin in Medicinal Plants by High-Performance Liquid Chromatography

The concentrations of myricetin in medicinal plants such as Rosa canina L. (rosa hip), Terebinthina chica L. (terebinth), Urtica dioica L. (nettle), and Portuca oleracea L. (purslane) were determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS). The aglycones of myricetin were extracted using methanol–ascorbic acid– hydrochloric acid, methanol–hydrochloric acid, and methanol, separated within 5 min, and individually quantitated in the positive ionization mode using optimized conditions for HPLC-MS. Methanol–ascorbic acid–hydrochloric acid was the optimum extraction solvent. The myricetin concentration in the plants were between 3 and 58 mg kg^?1, with a limit of quantification equal to 0.1 mg L^?1.     

Development of a Stabilized Pan/Tilt Platform and the State of the Art

In the context of this paper, a small scale, medium precision, stabilized pan/tilt platform is developed as a prototype, which is used to compare various stabilization algorithms experimentally. The overall performance of the system depends on rigid body dynamics, structural dynamics, servo control loops, stabilization control algorithm, sensor fusion algorithm and sensory feedback such as from the IMU （inertial measurement unit）. In the case that the response bandwidth of the overall system is high enough, the same hardware can also achieve active vibration isolation. All of these design aspects are investigated in the paper via numerical models and with their experimental verification.     

PHOTOCATALYTIC OXIDATION OF ALDEHYDES/PCE USING POROUS ANATASE TITANIA AND VISIBLE-LIGHT-RESPONSIVE BROOKITE TITANIA

We have synthesized an annealed porous aerogel titania (LUAG2), which demonstrates a very high photocatalytic activity for aldehydes and perchloroethylene (PCE) photocatalytic oxidation (PCO) in gas phase under blacklight and fluorescent light irradiation. LUAG2 has a BET surface area of 237 m²/g and a porosity of 0.31 (volume fraction). X-ray diffraction (XRD) analysis shows LUAG2 is nearly pure anatase. It has improved the destruction of PCE and aldehydes as a group by 10-34% with black light compared to Degussa P-25. The optimum water vapor to butyraldehyde molar ratio is around 1/3. LUAG2 also shows better mineralization to CO₂ than Degussa P-25 TiO₂ does. Under irradiation of a 4 W fluorescent lamp LUAG2 gives a consistently higher conversion than that of Degussa P-25. The highly active photocatalyst indicates potential applications in indoor and outdoor environmental pollution control. A visible-light-responsive TiO₂, NTB 200, is also investigated for comparison purposes.     

Synthesis and characterization of poly(N-(2-(thiophen-3-yl)methylcarbonyloxyethyl)maleimide) and its spectroelectrochemical properties

A new monomer; N-(2-(thiophen-3-yl)methylcarbonyloxyethyl) maleimide (NMT) was synthesized. The chemical structure of the monomer was characterized by Nuclear Magnetic Resonance (¹H-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. Electrochemical polymerization of NMT was performed in acetonitrile (AN)/borontrifloride ethylether (BFEE) solvent mixture (1:1, v/v) where tetrabutylammonium tetrafluoroborate (TBAFB) was utilized as the supporting electrolyte. The resulting conducting polymer was characterized by Fourier Transform Infrared (FTIR) Spectroscopy, thermal analyses and Scanning Electron Microscopy (SEM). Electrical conductivity was measured by the four-probe technique. The spectroelectrochemical behavior and switching ability of P(NMT) film were investigated by UV–Vis spectrophotometry. P(NMT) revealed color changes between yellow and blue in the reduced and oxidized states respectively.