A kinetic study on the autoxidation of sunflowerseed oil

Unhydrogenated and hydrogenated sunflowerseed oils were exposed to the autoxidation process by sunlight under atmospheric conditions. Experiments were carried out in equal-sized glass, PET (polyethylene terephthalate) polymer, and metal (covered by tin) containers. The reaction time was 30 d, and the reaction course was observed by determining weight changes and peroxide values (PV) of the oil samples at the same time within 2-d intervals. The logarithm of the PV was plotted against time, and straight lines were obtained from the 4th or 6th d. The autoxidation reaction constants were obtained for each oil in each container. When comparing the reaction constants, the unhydrogenated oils autoxidize easily, and the autoxidation reaction occurs faster in sunlight in glass than in the PET polymer container and much faster than in the darkness of the metal container.     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Structure and Dielectric Properties of the Ba(Mg1/3Nb2/3)O3-La(Mg2/3Nb1/3)O3 System

A complete range of perovskite solid solutions can be formed in the (1 − x )Ba(Mg_1/3Nb_2/3)O₃- x La(Mg_2/3Nb_1/3)O₃ (BMN-LMN) pseudobinary system. While pure BMN adopts a 1:2 cation ordered structure, 1:1 ordered phases are stabilized for 0.05 ≤ x ≤ 1.0. Dark-field TEM images indicate that the La-doped solid solutions are comprised of large 1:1 ordered domains and no evidence was found for a phase-separated structure. This observation coupled with the systematic variations in the intensities of the supercell reflections supports a charge-balanced "random-site" model for the 1:1 ordering. The substitution of La also induces a transformation from a negative to positive temperature coefficient of capacitance in the region 0.25 ≤ x ≤ 0.5.     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

Fabrication and characterization of silica modified polyimide–zeolite mixed matrix membranes for gas separation properties

In this study, new monomers having silica groups were synthesized as an intermediate for the preparation of poly(imide siloxane)-zeolite 4A and 13X mixed matrix membranes (MMMs). The effects of membrane preparation steps, zeolite loading, precursor’s composition, and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. The new diamine monomer was prepared from 3,5-diaminobenzoic acid (3,5-DABA), 3-aminopropyltrimethoxysilane (3-APTMS), and zeolite 4A and zeolite 13X in N-methyl-2-pyrollidone (NMP) at 180 °C. Poly(imide siloxane)-zeolite 4A and 13X MMMs were synthesized from pyromellitic dianhydride (PMDA) and 4,4-oxydianiline (ODA) in NMP using a two-step thermal imidization. SEM images of the MMMs show the interface between polymer and zeolite phases getting closer when surface modified zeolite is used. The increase in glass transition temperature (T _g) confirms the polymer chain becoming more rigid induced by the presence of zeolite. The experimental results indicated that a higher zeolite loading resulted in a decrease in gas permeability and an increase in gas pair selectivity. In terms of O₂ and N₂ permeance and ideal selectivity, the separation performances of poly(imide siloxane)-zeolite MMMs were related to the zeolite type and zeolite pore dimension.     

Evaluation of rheological and image properties of styrene‐butadiene‐styrene and ethylene‐vinyl acetate polymer modified bitumens

This article presents a laboratory evaluation of conventional, fundamental, rheological, and morphological characteristics of styrene‐butadiene‐styrene (SBS) and ethylene vinyl acetate (EVA) polymer modified bitumens. Polymer modified bitumen (PMB) samples have been produced by mixing a 50/70 penetration grade unmodified (base) bitumen with SBS and EVA copolymer at different polymer contents. The fundamental viscoelastic properties of the PMBs were determined using dynamic (oscillatory) mechanical analysis and presented in the form of temperature and frequency‐dependent rheological parameters. The morphology of the samples as well as the percent area distribution of polymers throughout the base bitumen have been characterized and determined by means of fluorescent light optic microscopy and Qwin Plus image analysis software, respectively. The results indicated that polymer modification improved the conventional and rheological properties of the base bitumen. It was also concluded that the temperature and frequency had a significant effect on complex modulus of PMBs. The behavior of EVA and SBS PMBs had exhibited quite difference at 50°C. Moreover, it was found out that at low polymer contents, the samples revealed the existence of dispersed polymer particles in a continuous bitumen phase, whereas at high polymer contents a continuous polymer phase has been observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid

In this study, the surface characteristics of polyester and polyamide fabrics were changed by plasma polymerization technique utilizing acrylic acid as precursor. This monomer was used to produce hydrophilic materials with extended absorbency. The hydrophilicity, total wrinkle recovery angle (WRA°) and breaking strength of the fabrics were determined prior and after plasma polymerization treatment. The modification of surfaces was carried out at low pressure (<100 Pa) and low temperature (<50°C) plasma conditions. The effects of exposure time and discharge power parameters were optimized by comparing properties of the fabrics before and after plasma polymerization treatments. It was shown that two sides of polyester fabric samples were treated equally and homogeneously in plasma reactor. For polyester fabrics, the minimum wetting time, 0.5 s, was observed at two plasma processing parameters of 10 W–45 min and 10 W–20 min, where untreated fabric has a wetting time of 6 s. For polyester fabrics, the maximum value was obtained at 60 W–5 min with the wrinkle recovery angle of 306° where the untreated fabric has 290°. The optimum plasma conditions for polyamide fabrics were determined as 30 W–45 min where 2 s wetting time was observed. Wrinkle recovery angle of untreated polyamide fabric was 264°. In this study, after plasma polymerization of acrylic acid, wrinkle recovery angle values were increased by 13%. No significant change was observed in breaking strength of both fabrics after plasma treatment. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2318–2322, 2007     

Synthesis,characterization, thermal stability,conductivity, and band gap of a new aromatic polyether containing an azomethine as a side

In this study, the oxidative polycondensation reaction conditions of 4‐[(4‐methylphenyl)iminomethyl]phenol (4‐MPIMP) were studied by using oxidants such as air O₂, H₂O₂, and NaOCl in an aqueous alkaline medium between 50 and 90°C. The structures of the synthesized monomer and polymer were confirmed by FTIR, UV–vis, ¹H–¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(4‐methylphenyl)iminomethyl]phenol (P‐4‐MPIMP) was found to be 28% for air O₂ oxidant, 42% for H₂O₂ oxidant, and 62% for NaOCl oxidant. According to the SEC analysis, the number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index values of P‐4‐MPIMP were found to be 4400 g mol^?1, 5100 g mol^?1, and 1.159, using H₂O₂, and 4650 g mol^?1, 5200 g mol^?1, and 1.118, using air O₂, and 5100 g mol^?1, 5900 g mol^?1, and 1.157, using NaOCl, respectively. According to TG analysis, the weight losses of 4‐MPIMP and P‐4‐MPIMP were found to be 85.37% and 72.19% at 1000°C, respectively. P‐4‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐4‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels and electrochemical energy gaps (E) of 4‐MPIMP and P‐4‐MPIMP were found to be ?5.76, ?5.19; ?3.00, ?3.24; 2.76 and 1.95 eV, respectively. According to UV–vis measurements, optical band gaps (E_g) of 4‐MPIMP and P‐4‐MPIMP were found to be 3.34 and 2.82 eV, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Fabrication and characterization of in-situ Al3Ni intermetallic and CeO2 particulate-reinforced aluminum matrix composites

Al-xNi-yCeO₂ (x = 6, 10, 15, 20 and y = 0, 5, 10 wt%) composites were produced by a powder metallurgical production route. Powder mixtures of Al, Ni and CeO₂ were fabricated via mechanical alloying (MA) for 4 h in a Spex-type high-energy ball mill. Both the mechanically alloyed (MAed) and non-MAed (as-blended mixtures) powders were pre-compacted in a hydraulic press under 650 MPa and then pressurelessly consolidated at 630 °C for 2 h under an inert atmosphere. The effects of MA process and the amounts of Ni and CeO₂ on the microstructural, mechanical and tribological properties of the sintered composites were determined. Based on the SEM and XRD investigations, the MAed powders illustrated a homogenous structure, comprising flaky particles with smaller crystallite sizes and greater lattice strain. According to the XRD analysis, Ni formed Al–Ni intermetallic compounds in the matrix of sintered composites that act as secondary reinforcement phases. The SEM observations conducted on the MAed samples demonstrated more uniformly and finely distributed Al₃Ni and CeO₂ phases in the microstructure of the MAed samples, unlike the non-MAed ones. The hardness values of sintered composites increased due to the MA process and increasing Ni and CeO₂ amounts, and the hardness value of the MAed Al20Ni–10CeO₂ sample reached 179 HV. The ultimate compressive strength and failure strain of the MAed Al6Ni–10CeO₂ sample were 441 MPa and 11.3%. In the Al20Ni–10CeO₂ sample, the compressive strength and failure strain were 391 MPa and 5.5%, respectively. Additionally, the reciprocating wear test results illustrated that both wear resistance and hardness values of the composites increased as the amounts of Ni and CeO₂ increased, and the Al20Ni–10CeO₂ sample exhibited the highest wear resistance as 0.175 × 10^-3 mm³/Nm.