Effect of CR and FT-paraffin versus SBS modification in terms of conventional and rheological properties

In this study, the rheological and conventional properties of binders prepared with crumb rubber (CR) and FT-paraffin were compared to styrene-butadiene-styrene (SBS)-modified binders’ properties. The objective of this study was to determine which modified binders in different combinations of the CR and the FT-paraffin exhibited better performance than the SBS-modified binders, in terms of conventional and rheological properties. Results showed that the additives exhibited different performances for different types of tests. Many of the combinations including the common usage of the CR and the FT-paraffin performed better at high temperature than the SBS modification. Overall, the test results show that the binders prepared by 6% CR with 3 and 4% FT-paraffin and those prepared with 8% CR with 3% FT-paraffin were better binders than the 4% SBS-modified binder, in terms of low and high temperature properties.     

Magnetoresistance behaviour in CoFe/Cu multilayers: thin Cu layer effect

The magnetoresistance properties of the CoFe/Cu multilayers have been investigated as a function of thin non-magnetic Cu layer thickness (from 2.5 to 0.3 nm). CoFe/Cu multilayers were electrodeposited on Ti substrates from a single electrolyte containing their metal ions under potentiostatic control. The structural analysis of the films was made using X-ray diffraction. The peaks appeared at 2θ ≈ 44°, 51°, 74° and 90° are the main Bragg peaks of the multilayers, arising from the (111), (200), (220) and (311) planes of the face-centered cubic structure, respectively. The magnetic characterization was performed by using vibration sample magnetometer in magnetic fields up to ±1600 kA/m. At 0.6, 1.2 and 2.0 nm Cu layer thicknesses, the high saturation magnetization values were observed due to antiferromagnetic coupling of adjacent magnetic layers. Magnetoresistance measurements were carried out using the Van der Pauw method in magnetic fields up to ±1000 kA/m at room temperature. All multilayers exhibited giant magnetoresistance (GMR), and the similar trend in GMR values and GMR field sensitivity was observed depending on the Cu layer thickness.     

Preserving spatial information and overcoming variations in appearance for face recognition

Local feature-based approaches mainly aim to achieve robustness to variations in facial images by assuming that only some parts of the facial images may be affected. However, such approaches may lose spatial information. In this study, a compromise feature extraction scheme is studied which extracts local features while preserving spatial information. The proposed scheme exploits an ensemble of classifiers where each member is constructed using randomly selected design parameters including the size, number and location of sub-images for local feature extraction. Experiments conducted on FERET and ORL databases have shown that proposed scheme surpasses the local feature-based reference systems which focus on either local information or preserving spatial information.     

Model‐based code generation for HLA federates

This paper addresses the problem of automated code generation for a High Level Architecture compliant federate application given its behavior model. The behavior model is a part of the architectural model of a federation that the federate can participate in. The federate behavior model is based on Live Sequence Charts, adopted as the behavioral specification formalism in the Federation Architecture Metamodel (FAMM). FAMM serves as a formal language for describing federation architectures. An objective is to help the testing of federation architecture by means of its prototype implementation early in the development lifecycle. A further objective is to help developers construct complete federate applications that are well modularized. The approach to achieve these objectives is aspect‐oriented in that the generated code, which handles the federate's interactions with a federation execution, serves as the base code, where the computation logic is to be weaved as an aspect. Copyright © 2009 John Wiley & Sons, Ltd.     

Bicriteria robotic operation allocation in a flexible manufacturing cell

Consider a manufacturing cell of two identical CNC machines and a material handling robot. Identical parts requesting the completion of a number of operations are to be produced in a cyclic scheduling environment through a flow shop type setting. The existing studies in the literature overlook the flexibility of the CNC machines by assuming that both the allocation of the operations to the machines as well as their respective processing times are fixed. Consequently, the provided results may be either suboptimal or valid under unnecessarily limiting assumptions for a flexible manufacturing cell. The allocations of the operations to the two machines and the processing time of an operation on a machine can be changed by altering the machining conditions of that machine such as the speed and the feed rate in a CNC turning machine. Such flexibilities constitute the point of origin of the current study. The allocation of the operations to the machines and the machining conditions of the machines affect the processing times which, in turn, affect the cycle time. On the other hand, the machining conditions also affect the manufacturing cost. This study is the first to consider a bicriteria model which determines the allocation of the operations to the machines, the processing times of the operations on the machines, and the robot move sequence that jointly minimize the cycle time and the total manufacturing cost. We provide algorithms for the two 1-unit cycles and test their efficiency in terms of the solution quality and the computation time by a wide range of experiments on varying design parameters.     

Clustering MIT–BIH arrhythmias with Ant Colony Optimization using time domain and PCA compressed wavelet coefficients

In this paper, Ant Colony Optimization (ACO) based clustering analysis of ECG arrhythmias taken from the MIT–BIH Arrhythmia Database is proposed. Both time domain and discrete wavelet transform (DWT) based frequency domain features are used in the analysis. Since the number of wavelet coefficients are huge amount as compared to the time domain parameters, Principal Component Analysis (PCA) based compression is applied on them in order to decrease their number to the number of time domain features. Then, the reduced numbers of frequency parameters are combined with the time domain features, in order to get the total feature sets. Different types of feature sets are tried and the classification results are compared. These are: time domain feature set, frequency domain feature set and the mixture of them. A neural network algorithm is developed in parallel to verify and measure the ACO classifier's success. Moreover, linear discriminant analysis (LDA) is used to show the effect of clustering on the system's results. The method is tested with MIT–BIH database to classify normal beats and five different critical and having vital importance arrhythmia types. Chosen six classes are normal sinus rhythm, premature ventricular contraction (PVC), atrial premature contraction (APC), right bundle branch block (RBBB), ventricular fusion (F) and fusion (f). Comparison results indicate that the mixture feature set gave a better success for the classification.     

Throughput optimization in two-machine flowshops with flexible operations

In this study, a two-machine flowshop producing identical parts is considered. Each of the identical parts is assumed to require a number of manufacturing operations, and the machines are assumed to be flexible enough to perform different operations. Due to economical or technological constraints, some specific operations are preassigned to one of the machines. The remaining operations, called flexible operations, can be performed on either one of the machines, so that the same flexible operation can be performed on different machines for different parts. The problem is to determine the assignment of the flexible operations to the machines for each part, with the objective of maximizing the throughput rate. We consider various cases regarding the number of parts to be produced and the capacity of the buffer between the machines. We present solution methods for each variant of the problem.     

Recovery of sensor embedded washing machines using a multi-kanban controlled disassembly line

Product recovery involves the recovery of materials and components from returned or end-of-life products. Disassembly, an element of product recovery, is the systematic separation of an assembly into its components, subassemblies or other groupings. Stricter environmental regulations together with dramatic decrease in natural resources and landfills have increased the importance of disassembly as all product recovery options require some level of disassembly. Due to changes made during the lifetime of a product by customers or service personnel, the number and the version of components prior to disassembly is unknown. Customers may also discriminate between and demand different versions of components. The existence of non-functional components further adds to the uncertainty associated with disassembly yield. Sensors implanted into products during their production can address this uncertainty by providing information on the number, condition and version of components prior to disassembly. In this study, we evaluate the impact of sensor embedded products (SEPs) on the various performance measures of a washing machine (WM) disassembly line controlled by a multi-kanban system, which takes into consideration the highly stochastic behavior of the line while managing material and kanban flows. First, separate design of experiments studies based on orthogonal arrays are performed for conventional products and SEPs. In order to observe the response of each experiment, detailed discrete event simulation (DES) models for both types of products are developed considering the precedence relationships among the components of a WM. Then, pair-wise t-tests are conducted to compare the two cases based on different performance measures. According to the results, SEPs provide significant reductions in all costs (viz., backorder, holding, disassembly, disposal, testing and transportation) while increasing revenue and profit.