Effect of clinoptilolite filler on the physical and mechanical properties of polypropylene

This study aims to investigate the mechanical and physical properties of polypropylene (PP) filled by natural zeolite. For this purpose, a natural zeolite (at 1–6 wt% filler loadings) with two different particle sizes was used. Two different kinds of silane coupling agents (3‐aminopropyltriethoxysilane, GAPTES and 3‐glycidoxypropyltrimethoxysilane, GPTMS) at three different volume ratios were used to improve the zeolite compatibility with PP and to improve the mechanical properties of composites. Fillers and PP were compounded with a twin screw extruder, and the composites were moulded with injection moulding press. The samples were subjected to mechanical tests (i.e., impact and tensile tests) and physical tests (i.e., hardness, density, and melt flow index, MFI). The physical test results showed that the levels of hardness and density of both unmodified and modified zeolite‐filled PP composites were higher compared with neat PP. The MFI values of composites were decreased by increasing zeolite loading level. Composites including GAPTES modified zeolite showed improved yield strength, impact strength and stiffness compared with composites filled with unmodified zeolite particles. POLYM. COMPOS. 34:1396–1403, 2013. © 2013 Society of Plastics Engineers     

Naphtha derived from polyolefins

Conversion of polyolefins (HDPE, LDPE and PP) into feedstock naphtha was investigated by hydroliquefaction process. Hydroliquefaction experiments were carried out under cold hydrogen pressure of 5 MPa at the temperatures between 375 and 450 °C in absence and presence of catalyst. Two types commercial catalysts were used, a hydrocracking catalyst (DHC-8) and a hydrogenation catalyst (HYDROBON). The effect of temperature and catalyst type on product yields and composition of gas and liquid products was investigated. The temperature was the main effect in hydroliquefaction. DHC-8 showed good cracking activity, but it gave the liquid product containing high olefin content same as thermal run. Although HYDROBON catalyst produced the sufficient amount of liquid (and naphtha fraction) at the higher temperature, it gave the liquid product with very low olefin content. The naphtha fractions obtained from polyolefins under the optimal hydrocracking conditions were analyzed by PIONA instrument to determine the hydrocarbon groups. PIONA analysis showed that the naphtha obtained from hydroliquefaction over HYDROBON catalyst could be used as a petrochemical feedstock. However, the naphtha obtained in presence of DHC-8 catalyst, which is to be used a feedstock, was needed further hydrogenation treatment.     

Accurate determination of hexanal in beef bouillons by headspace solid‐phase microextraction gas‐chromatography mass‐spectrometry

Lipid oxidation has great impact on the quality of food products through flavor and taste deterioration, reduction in nutritive value, and potential toxicity of the oxidized food components. Flavor and taste deterioration can be easily perceived and it represents one of the major causes of consumer complaints in the food industry. The deterioration of sensory properties is due to the decomposition products of hydroperoxides that easily isomerize and degrade into volatile compounds. Volatile products are responsible for flavor and taste deterioration. In this study, we present the development of the solid‐phase microextraction gas chromatography‐mass spectrometry (SPME‐GC‐MS) technique to quantify low amounts (μg/g range) of secondary oxidation products, i.e. hexanal. The optimization of SPME parameters is a difficult task because of the possibility of further formation of volatile products during analysis. Different parameters such as type of fiber, exposure time of the fiber to the sample headspace and the optimal temperature of absorption have also been investigated. The complete validation of the method was achieved by the determination of linearity, limits of detection and quantification and repeatability. We demonstrated that the SPME method is a valuable tool for the quantification of low amounts of secondary oxidation products such as hexanal. Therefore, this technique can be used to detect early formation of volatiles.     

Integrative Analysis of Metabolomic,Proteomic and Genomic Data to Reveal Functional Pathways and Candidate Genes for Drip Loss in Pigs

The aim of this study was to integrate multi omics data to characterize underlying functional pathways and candidate genes for drip loss in pigs. The consideration of different omics levels allows elucidating the black box of phenotype expression. Metabolite and protein profiling was applied in Musculus longissimus dorsi samples of 97 Duroc × Pietrain pigs. In total, 126 and 35 annotated metabolites and proteins were quantified, respectively. In addition, all animals were genotyped with the porcine 60 k Illumina beadchip. An enrichment analysis resulted in 10 pathways, amongst others, sphingolipid metabolism and glycolysis/gluconeogenesis, with significant influence on drip loss. Drip loss and 22 metabolic components were analyzed as intermediate phenotypes within a genome-wide association study (GWAS). We detected significantly associated genetic markers and candidate genes for drip loss and for most of the metabolic components. On chromosome 18, a region with promising candidate genes was identified based on SNPs associated with drip loss, the protein “phosphoglycerate mutase 2” and the metabolite glycine. We hypothesize that association studies based on intermediate phenotypes are able to provide comprehensive insights in the genetic variation of genes directly involved in the metabolism of performance traits. In this way, the analyses contribute to identify reliable candidate genes.     

Enhanced Catalytic,Antibacterial and Anti-cancer Activities of Erythromycin Capped Gold Nanoparticles

Journal of Inorganic and Organometallic Polymers and Materials - In this study, the nanosized spherical erythromycin capped gold nanoparticles (eryth-Au(0)NPs) were fabricated for the first time....     

Fabrication and characterization of silica modified polyimide–zeolite mixed matrix membranes for gas separation properties

In this study, new monomers having silica groups were synthesized as an intermediate for the preparation of poly(imide siloxane)-zeolite 4A and 13X mixed matrix membranes (MMMs). The effects of membrane preparation steps, zeolite loading, precursor’s composition, and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. The new diamine monomer was prepared from 3,5-diaminobenzoic acid (3,5-DABA), 3-aminopropyltrimethoxysilane (3-APTMS), and zeolite 4A and zeolite 13X in N-methyl-2-pyrollidone (NMP) at 180 °C. Poly(imide siloxane)-zeolite 4A and 13X MMMs were synthesized from pyromellitic dianhydride (PMDA) and 4,4-oxydianiline (ODA) in NMP using a two-step thermal imidization. SEM images of the MMMs show the interface between polymer and zeolite phases getting closer when surface modified zeolite is used. The increase in glass transition temperature (T _g) confirms the polymer chain becoming more rigid induced by the presence of zeolite. The experimental results indicated that a higher zeolite loading resulted in a decrease in gas permeability and an increase in gas pair selectivity. In terms of O₂ and N₂ permeance and ideal selectivity, the separation performances of poly(imide siloxane)-zeolite MMMs were related to the zeolite type and zeolite pore dimension.     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Evaluation of rheological and image properties of styrene‐butadiene‐styrene and ethylene‐vinyl acetate polymer modified bitumens

This article presents a laboratory evaluation of conventional, fundamental, rheological, and morphological characteristics of styrene‐butadiene‐styrene (SBS) and ethylene vinyl acetate (EVA) polymer modified bitumens. Polymer modified bitumen (PMB) samples have been produced by mixing a 50/70 penetration grade unmodified (base) bitumen with SBS and EVA copolymer at different polymer contents. The fundamental viscoelastic properties of the PMBs were determined using dynamic (oscillatory) mechanical analysis and presented in the form of temperature and frequency‐dependent rheological parameters. The morphology of the samples as well as the percent area distribution of polymers throughout the base bitumen have been characterized and determined by means of fluorescent light optic microscopy and Qwin Plus image analysis software, respectively. The results indicated that polymer modification improved the conventional and rheological properties of the base bitumen. It was also concluded that the temperature and frequency had a significant effect on complex modulus of PMBs. The behavior of EVA and SBS PMBs had exhibited quite difference at 50°C. Moreover, it was found out that at low polymer contents, the samples revealed the existence of dispersed polymer particles in a continuous bitumen phase, whereas at high polymer contents a continuous polymer phase has been observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Grafting of poly(ethylene terephthalate) fibers with methacrylic acid using benzoyl peroxide

The graft copolymerization of methacrylic acid onto poly(ethylene terephthalate) fibers, by the aid of benzoyl peroxide, have been investigated. The graft yield increased up to 85°C, and then decreased with the further increase in temperature. The maximum graft yield was obtained at benzoyl peroxide concentration of 4.0 × 10^?3 mol/L. The increase in the concentration of monomer was found to increase the graft yield. The change in the graft yield was followed by the experiments carried out using different water/solvent mixtures. Also, the change in the properties of polye (thylene terephthalate) fibers grafted with methacrylic acid such as moisture regain, density, and diameter were investigated.     

Phenolic profiles of Turkish olives and olive oils

Phenolic compound distribution of Turkish olive cultivars and their matching olive oils together with the influence of growing region were investigated. One hundred and one samples of olives from 18 cultivars were collected during two crop years from west, south and south‐east regions of Turkey. The olives were processed to oils and both olive and olive oil samples were evaluated for their phenolic compound distribution. The results have shown that main phenolics of Turkish olives were tyrosol, oleuropein, p‐coumaric acid, verbascoside, luteolin 7‐O‐glucoside, rutin, trans cinnamic acid, luteolin, apigenin, cyanidin 3‐O‐glucoside and cyanidin 3‐O‐rutinoside. Oleuropein and trans cinnamic acid were present in higher amounts among all phenolics. Principal component analyses showed that the growing region did not have drastic effect on phenolic profile of olives. The major phenolic compounds of olive oils were tyrosol, syringic acid, p‐coumaric acid, luteolin‐7‐O‐glucoside, trans cinnamic acid, luteolin and apigenin. Luteolin is a predominant phenolic compound in almost all oil samples. Total phenol concentrations of Southeast Anatolian oils were found to be lower than those of the other regions.