Behavior of FRP Strengthened Reinforced Concrete Beams under Torsion

The use of fiber reinforced plastics (FRPs) for flexural and shear strengthening of reinforced concrete beams has been scrutinized to a considerable depth by researchers worldwide. The area of torsional strengthening however has not been as popular. This paper presents the results of an experimental investigation together with a numerical study on reinforced concrete beams subjected to torsion that are strengthened with FRP wraps in a variety of configurations. In the experimental study, the increase in the ultimate torque for different strengthening configurations, failure mechanisms, crack patterns, and ductility levels are monitored and presented. Experimental results show that FRP wraps can increase the ultimate torque of fully wrapped beams considerably in addition to enhancing the ductility. The experimental results upgrade the weak archival data on torsional strengthening by application of FRP. The numerical section reports on analyses performed by the ANSYS finite element program. Predictions are compared with experimental findings and are in reasonable agreement.     

Position and stiffness analysis of a new asymmetric 2PRR–PPR parallel CNC machine

In this paper, structural stiffness analysis of a new 3-axis asymmetric planar parallel manipulator, a 2 P RR–P P R structural kinematic chain, is investigated. The manipulator is proposed as a tool holder for a 5-axis hybrid computer numerical control (CNC) machine. First, the structure of the robot is introduced and inverse kinematics solution is presented. Secondly, stiffness matrix of the robot is determined using a continuous method based on Castigliano’s theorem and calculation of strain energy of the robot components. This method removes the need for commonly used simplifying assumptions and, therefore, results in good accuracy. For this purpose, force and strain energy for each segment of the robot are analyzed. Finally, to verify the analytical results, commercial FEM software is used to simulate the physical structure of the manipulator. A numerical example is presented which confirms the correctness of the analytical formulations.     

A Gauss–Newton approach to joint image registration and intensity correction

We develop a new efficient numerical methodology for automated simultaneous registration and intensity correction of images. The approach separates the intensity correction term from the images being registered in a regularized expression. Our formulation is consistent with the existing non-parametric image registration techniques, however, an extra additive intensity correction term is carried throughout. An objective functional is formed for which the corresponding Hessian and Jacobian is computed and employed in a multi-level Gauss–Newton minimization approach. In this paper, our experiments are based on elastic regularization on the transformation and total variation on the intensity correction. Validations on dynamic contrast enhanced MR abdominal images for both real and simulated data verified the efficacy of the model.     

Boundary query solution using convex hull algorithm

An important issue in database (DB) systems is responding to different users’ queries in an acceptable time. To do this, we should define different queries based on users’ real needs and we should consider suitable solutions. In this article, we express a new query called ‘boundary query’ which is used for achieving an overall view of a subject in the DB. This query does not return all query answers but it returns boundary values that cover all answers for the related query. In this article, we map a DB environment to a vector space based on necessary attributes. Then we implement the proposed method, and based on the results, we observe that the proposed method's run time is acceptable for huge DBs.     

Compact bilayer substrate integrated waveguide leaky wave antenna with dumbbell‐shaped slot based on the TE20 mode

In this article, a compact dual layer leaky wave antenna array is simulated and constructed using the substrate integrated waveguide (SIW) based on the TE₂₀ mode at the X‐ and Ku‐bands. The proposed antenna is designed by creating dumbbell‐shaped slots on the upper layer of the SIW. These slots have increased the antenna bandwidth so that the proposed antenna has a bandwidth of 9.5 to 13.7 GHz and a fractional bandwidth of 36%. In addition, to excite the TE₂₀ mode, an SIW power divider is used in the feeding network of the antenna located in the bottom layer. Moreover, the gain and directivity are other advantages of the proposed antenna so that at 12.5 GHz the antenna peak gain reaches to 15.7 dB. Antenna beam scanning angle is from 5° to 81°. This antenna is simulated and analyzed by the CST Microwave Studio software. The obtained results from the antenna test lab confirm the simulation results.     

A selective modified bentonite–porphyrin carbon paste electrode for determination of Mn(II) by using anodic stripping voltammetry

A novel voltammetric sensor based on chemically modified bentonite–porphyrin carbon paste electrode (MBPCE) has been introduced for the determination of trace amount of Mn(II) in wheat flour, wheat rice and vegetables. In this method Mn(II) gives well-defined voltammetric peak at the pH range of 3.5–7.5. For the preliminary screening purpose, the catalyst was prepared by modification of bentonite with porphyrin and characterized by thermogravimetric method (TG) and UV–vis spectroscopy. The detection limit (three times signal-to-noise) with 4 min accumulation is 1.07 × 10⁻⁷ mol L⁻¹ Mn(II). The peak currents increases linearly with Mn(II) concentration over the range of 6.0 × 10⁻⁷ to 5.0 × 10⁻⁴ mol L⁻¹ (r² = 0.9959). Statistical treatment of the results gave a relative standard deviation lower than 2.30%. The chemical and instrumental parameters have been optimized and the results showed that 1000-fold excess of the additive ions had not interferences on the determination of Mn(II).     

SIW Corporate-Feed Network for Circular Polarization Slot Array Antenna

Wireless Personal Communications - In this paper, multilayer feeding network for linear slot array antenna is studied. A substrate integrated waveguide (SIW) corporate-feed network for linear slot...     

Critical moisture content for microbial growth in dried food‐processing residues

BACKGROUND: Food‐processing residues are good feedstocks for biofuel and biochemical production because they have high energy content and are abundant. Year‐round biofuel and biochemical production requires proper storage to prevent microbial decomposition and thermal runaway. In this study, microbial activity of tomato pomace (TP), grape pomace (GP), fermented grape pomace (FGP) and sugar beet pulp (SBP) was monitored at nine different moisture contents. RESULTS: Maximum and cumulative respirations for each feedstock with respect to moisture content followed a sigmoidal relationship. The critical moisture content below which no microbial activity was detected for SBP, TP, FGP and GP was 24–31, 16–21, 23–33 and 43–46% (dry basis) respectively. A logarithmic relationship was observed (R² = 0.94) between critical moisture content and initial water‐soluble carbohydrate (WSC) content of the processing residues. CONCLUSION: The critical moisture content below which no microbial activity was detected and the relationship between critical moisture content and initial WSC content were determined in this study for four food‐processing residues. Both parameters permit evaluation of the potential for deterioration of food‐processing residues during storage based on moisture content and WSC content. Copyright © 2010 Society of Chemical Industry