佩戴防尘口罩对吸入气溶胶粒度影响的实验研究

本文介绍了应用级联撞击器和佩戴口罩的人头模型在天然铀燃料元件加工现场测定吸入气溶胶粒度的方法。结果表明,佩戴口罩使得吸入气溶胶的活度中值空气动力学直径(AMAD)变小,并且吸入气溶胶的 AMAD 值与场所气溶胶的 AMAD 值有一定关系,粒径分布类型也发生改变。文中还报告了口罩的漏过率有随微尘粒径减小而增大的趋势。实验结果对内照射剂量估算以及评价口罩的防尘能力有一定的参考价值。     

Effect of H_2 dilution on the structure and properties of nc-CrC/a-C:H coatings deposited by a hybrid beams system

Nanocomposite Cr C/hydrogenated amorphous carbon(nc-CrC/a-C:H) coatings were deposited by a hybrid beams system comprised of a hollow cathode ion source and a cathodic arc ion-plating unit with varying H_2 flow rates. The influences of H_2 flow rates on the morphologies, microstructures, and properties of the coatings were systematically studied. The morphologies and microstructures of the coatings were characterized by SEM, AFM, XPS, Raman spectroscopy, GIXRD, and HRTEM. The mechanical and tribological properties were measured by a nano-indenter, scratch tester, and ball-ondisk tribometer. The wear tracks were evaluated using 3D profilometer, optical microscope, and EDS analysis. It has been found that a moderate H_2 flow rate can effectively smooth the surface, enlarge the fraction of a sp~3 bond, and improve the properties. The coating exhibits the highest hardness and elastic modulus at the H_2 flow rate of 40 sccm. A superior combination of adhesion strength,friction coefficient, and wear resistance can be achieved at the H_2 flow rate of 80 sccm.     

A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

基于双阶段多尺度生成对抗网络的图像复原方法

针对人脸图像复原任务中对图像尺度信息利用不足和眼镜结构复原错误的问题,提出一种基于双阶段多尺度生成对 抗网络复原模型。该模型第1阶段引入改进损失的U-Net 粗重构网络,利用跳连接减少原始图像信息的丢失,融合3种不同 的损失函数提高生成器的重构能力,采用双判别器考虑全局信息和局部信息,并提出一种混合域注意力机制用于关注图像的 空间和通道信息。第2阶段的精修复网络构建了全新的特征增强模块,增强网络对细节信息的提取能力和对结构的表达能 力,引入相对判别器,用于关注生成样本与真实样本之间的相对真实性,提高了生成质量和训练稳定性。实验结果表明,该方 法能够复原各类图像缺失的情况,并能够有效复原佩戴眼镜的人脸图像,与其他方法相比,该方法的峰值信噪比、结构相似性 和感知相似度评估等指标分别提升了3.81%、2.65%和0.45%。     

基于阅读2.0模式,高校馆学生读者网络阅读推广分析

阅读2.0是全民阅读推广的新理念.本文简述了阅读2.0的明显特征及两大优势,并结合长春高校图书馆的调查数据,分析了高校大学生网络阅读现状.     

RS(255,223)译码器的设计与FPGA实现

RS码是一种多进制分组循环码。检错和纠错能力强．尤其适合纠正突发错误，在通信系统中有着广泛的应用。本文所研究的RS(255，223)译码器采用修正的Euclid译码算法(MEA)，介绍了一种基于FPGA的RS译码器的设计和硬件电路实现方案。按照自顶向下的设计流程．划分模块．详细论述了各子模块的设计过程。     

低功耗矢量水声信号采集处理系统设计与实现

为进一步降低矢量水听器信号采集处理系统对水下滑翔机平台的续航影响,设计了一种以 ARM和 DSP 为核心控制 器的低功耗信号采集处理系统。利用ARM 控制器实现系统的多种工作模式,以达到不同状态下的最佳功耗控制。此外,在 控制软件中加入必要的优先级设计和流水线设计,以提高系统硬件控制效率,最后利用功率测试仪对系统不同工作模式进行 测试。结果表明,低功耗模式下平均功耗约为1.27 W, 实时处理模式下平均功耗约为4.29 W。 在长时间连续工作情况下,可 大幅度降低实时处理模式的工作时间占比,功耗控制效果显著,有效证明了该方案的有效性和优越性。     

Preparation and structure of fluorinated/non-fluorinated polyacrylate gradient emulsion blend film

The emulsion blend method, which is environmentally friendly and energy saving, was used to prepare a compositional gradient film of fluorinated/non-fluorinated polyacrylate in this paper. The size and glass-transition temperature (T_g) of the emulsion particles were designed to enhance the driving force of their selective congregation and promote the formation of gradient structure. The structures and surface properties of the obtained films were characterized. The results showed that when the fluorinated components have much smaller particle size and higher T_g than those of fluorine-free polyacrylate components, the gradient structures formed in the direction across the film thickness of the films. The concentration of the fluorinated component increased gradually from film-glass interface to film-air interface in the blend film, making the surface free energies of the two sides of the gradient film distinctively different.     

一种新型的激光—等离子体辅助化学气相沉积装置的研究

为探索用激光离子体共同辅助化学气相沉积过程以实现室温沉积的可能性，设计并制造了一种新型的ＣＶＤ装置，实际了ＳｉＨ４－ＮＨ３－Ｎ２体系制取Ｓｉ３Ｎ４膜的试验。结果表明，激光和等离子体是可以相互促进，共同辅助ＣＶＤ过程的，且两者均处于较代的能量水平。