Mathematical and experimental investigation of the self-propagating high-temperature synthesis (SHS) of TiAl3 and Ni3Al intermetallic compounds

One-dimensional mathematical modeling was used to describe the self-propagating high-temperature synthesis (SHS) process for preparing TiAl₃ and Ni₃Al intermetallics. The kinetic parameters (activation energies and pre-exponential factors) for the two compounds were obtained by matching experimental measurement and the numerical solution. The results thus obtained were compared with rate parameters obtained using different methods. The activation energy was 483 and 283 kJ mol^?1 for the formation of TiAl₃ and Ni₃Al, respectively. The temperature profiles calculated using the mathematical model were compared with experimental measurements for both aluminides which indicated reasonable agreement. Fine particle size and moderate preheating increase the SHS rates.     

SHS法陶瓷衬管的研究现状及应用前景

回顾了自蔓延高温合成陶瓷衬管的发展历史，对国内外的研究现状进行归纳总结，介绍了离心ＳＨＳ法生产陶瓷衬管的工艺特点及产品性能，展望了离心ＳＨＳ陶瓷衬管的应用前景。     

混凝土结构非线性全过程分析中的迭代控制法研究

在深入研究各类迭代控制法的基础上，针对混凝土结构的非线性全过程分析，在常规的位移和弧长控制法中引入了简单适用的考虑路径搜寻和单因加速的方法，明显改善了收敛情况。     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

精密角位移传感器及其可靠性研究

从理论上探讨了磁阻率效应，叙述了精密角位移传感器的工作原理及结构设计。传感器的分辨率已达０．０１°，通过可靠性寿命试验，传感器的失效率λ（ｔ）＜１×１０－７／ｈ。     

Model-based location of automated guided vehicles in the navigation sessions by 3d computer vision

A model-based approach to determining the location of an automated guided vehicle (AGV) in the navigation session is proposed. Significant scenes along the navigation path are taken and stored as model images. Also, specific templates of each model image are chosen in advance for matching. When the AGV approaches one significant scene in the navigation session, an input image is taken and the corresponding model image is fetched. Each template in the model image is matched with the input image through the use of the three-step method. The templates are directly used for matching; therefore, no special image processing techniques are required for the input image in the navigation session. In addition, several templates in a model image are used for matching instead of the model image itself. This promotes the robustness of the matching results and saves the computation cost. Furthermore, the 2D string method is used as a post-verifier to discard erroneous matching results. The remaining correct matching results then can be used to determine the vehicle location on the navigation path. Simulated experiments are implemented and the results confirm the feasibility of the proposed approach. © 1994 John Wiley & Sons, Inc.     

管内机器人研究中的几项新技术

介绍了我们研制的管内机器人中应用的具有创新性的三项技术：１．轮式全主动新型行走机构；２．内壁环带视觉装置；３．新型离心喷涂器。     

PPS：基于PROSITE数据库检索蛋白质功能位点的计算机程序

用标准Ｃ语言在ＩＢＭ－ＰＣ兼容微机上开发了基于ＰＲＯＳＩＴＥ数据库检索蛋白质序列功能位点的ＰＰＳ程序，ＰＲＯＳＩＴＥ是Ｂａｉｒｏｃｈ建立的蛋白质功能位点或结构模式的资料库，为蛋白质序列分析和结构功能研究提供了新工具。     

AN EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE STARTING FLOW OF A UNIFORMLY ACCELERATING CIRCULAR CYLIINDER

The starting flow around a uniformly accelerated circular cylinder is investigatedby flow visualization techncque and solving N-S equations numerically in detail.The results ofthe starting flow are similar with those of the impulsively started one.At lower Re_α,numbers the“phenomenon a”is revealed;the“phenomenon β”appears at higher Re_α numbers,but withonly one secondary vortex.At the early stage of the starting vortex formation,the flow islaminar;at the later stage,the flow transforms into turbulent flow.The velocity distribution inthe flow field is measured with the multiwires installment.The calculational results are comparedwith the results of experiment,and both are in agreement with each other.     

相似理论在真空灭弧室研究和设计中的应用

本文应用相似理论得出,真空灭弧室中电弧运动速度与电流强度成线性关系的相似准则,和极限开断电流与触头直径、开距间的经验公式。认为用小电流模型来研究大电流真空灭弧室是可行的。