局部应力分析中两个问题的讨论

容器上的局部结构承受外加载荷时，需要对该局部结构的强度进行评定。本文通过分析后指出，针对局部应力评定的强度条件应根据载荷的种类和性质确定。另外，本文通过实例说明，当进行管系应力分析，从而确定接管施加于容器上的载荷时，接管与容器连接处的柔度对该处载荷值和管道中的最大弯矩值都会有很大影响，在设计中考虑该柔度对设计的安全性和经济性都是有意义的。     

构树皮丙酮抽出物的DEAE—Sephadex分离及GC—MS分析

利用ＤＥＡＥ—Ｓｅｐｈａｄｅｘ分离柱及ＧＣ—ＭＳ对构树皮丙酮抽出物 进行了分离和分析．在丙酮抽出物中中性组分占抽出物的５９．７％，弱酸性 组分和强酸性组分分别占２５．９％和１０．３％．中性组分中不皂化物占 ８９．２％，皂化物仅占８．４％．不皂化物的成分比较复杂，所检出的主要有 甾醇和甾酮类．皂化物中亚油酸占５０％，软脂酸占２１％．弱酸性组分中 ５０％以上是脂肪酸（亚油酸和软脂酸），而没有松香酸．     

Synthesis of novel bisphenol containing phthalazinone and azomethine moieties and thermal properties of cured diamine/bisphenol/DGEBA polymers

A novel bisphenol(1,2-dihydro-2-(4-((4-hydroxy)phenyliminomethylidene)phenyl)-4-(4-((4-(4-hydroxy)phenyliminomethylidene)phenoxy)phenyl)(2H)phthalazin-1-one, DPP) and a diamine(1,2-dihydro-2-(4-aminophenyl)-4-(4-(4-aminophenoxy)phenyl)(2H)phthalazin-1-one, DAP) were synthesized and characterized. The novel epoxy polymers containing phthalazinone and/or azomethine moieties were prepared by binary polymerization of DAP (or DPP) with diglycidyl ether of biphenyl A (DGEBA) and ternary polymerization of hybrid curing agents, DAP/DPP (DAP and DPP under different molar ratios) with DGEBA. The cure behaviors of these new epoxy systems were studied by dynamic differential scanning calorimeter (DSC) and Infrared (IR) scans. Especially, the activation energy of DAP/DGEBA calculated by Kissinger and Ozawa methods were 73.8 and 77.4 kJ/mol, respectively. For ternary epoxy system, it was found that hybrid curing agents of DAP/DPP exhibited significant associated effect on their reactivity towards the oxirane group. Glass transition temperatures (T_g's) of these new epoxy polymers were all above 150 °C from the results of DSC, and the initial thermal decomposition temperatures (T_d,5%'s) and integral procedure decomposition temperatures (IPDT's) of these new epoxy polymers are above 350 and 850 °C, respectively from results of thermogravimetric analyses (TGA). These results show that new epoxy polymers containing phthalazinone and/or azomethine moieties exhibited excellent thermal properties. Especially, thermal properties of the ternary epoxy polymers could be modified by changing the content of DAP and DPP. The linear relationships between char yield (Y_c,wt%) and the structural compositions of these new polymers (weight percentage of phthalazinone, azomethine and nitrogen, C/H weight ratio) were built.     

异种双活性基染料湿摩擦牢度再探讨

影响异种双活性基染料湿摩擦牢度主要有四个基本因素:染色基质的可染性、活性染料的化学结构、洗涤效率和助剂因素。提出了棉坏布预处理、使用助剂、提高染料的固色率和吸尽率、提升力等9项改进此类染料湿处理牢度的措施。有3篇参考文献。     

掺铜TiO^2光催化剂光催化氧化还原性能的研究

利用浸渍法制备了掺铜二氧化钛光催化剂，分别以乙酸降解和二氧化碳还原反应为探针，研究了催化剂的光催化氧化光催化还原性能．结果表明，铜掺杂能显著提高催化剂的光催化性能；结合光电子能谱、X光衍射分析等物理表征结果，对铜掺杂改性机制进行了讨论．     

提高φ5m×11.5m生料磨产量的措施

针对粘土资源枯竭问题,江苏巨龙水泥集团实施了以粉煤灰和硅石代替粘土的技改工程。但改造后因原料的变更,导致入房物料易磨性变差而影响了φ5m×11.5m生料磨的产质量,并进一步影响察系统的运行。因此该厂在工艺分析的基础上,采取了调整钢球级配、用高铬球替代合金刚球、改造选粉机、加强石灰石二破的管理和减少系统是否是“漏风”等技术措施,效果显著。改造后的生料磨台时产量比调整前提高了12t/h,且节电效果显著。     

氟化铵溶解含氟硅渣制备氟硅酸铵的实验研究

以氟化铵溶液和含氟硅渣为原料,通过化学溶解的方式,制备氟硅酸铵产品。考察了反应温度、反应时间、氟化铵溶液浓度和物料配比（氟化铵与二氧化硅的物质的量比）等不同工艺条件对氟硅酸铵收率、二氧化硅转化率的影响。实验结果表明：反应温度为93 ℃、反应时间为60 min、氟化铵溶液质量分数为20%~30%、物料配比为6∶1.1、反应体系搅拌速度为200~300 r/min时,氟硅酸铵的收率和氟化铵的转化率可控制在90%以上。     

Optimization of injection molding design. Part I: Gate location optimization

The placement of a gate in an injection mold is one of the most important variables of the total mold design. The quality of the molded part is greatly affected by the gate location, because it influences the manner in which the plastic flows into the mold cavity. Some defects, such as weldline and overpack, can be effectively controlled only by the gate location. Therefore, the product quality can be greatly improved by determining the optimum gate location. In this paper, we develop a general methodology for gate location optimization. We first quantify quality in terms of flow simulation outputs. We can thus assess detrimental effects such as warpage and dimensional instability as a function of the independent variable, which is in this case the gate location. Next we develop methods to search for the optimum gate location. The search method introduced in this paper is a method that combines a deterministic hill climbing search with a stochastic annealing search method. The method is appropriately called simulated annealing and hill climbing (SANHIL). The criteria used for evaluation during the search process are a function of the flow simulation outputs. We demonstrate the success of the method for a complex industrial mold. The approach is applicable to any complex mold geometry and any plastic.     

立足于创造性思维与实践能力培养的服装设计专业“项目设计”课程改革研究

针对现有服装设计专业“项目设计”课程存在的问题,根据服装产业市场发展的新趋势,提出立足于创造性思维与实践能力培养研究该课程内容及课程体系结构设置等方面的改革思路与举措。改革强调以学生为中心。培养创造性思维与实践能力相结合的复合型人才,以互动式教学与启发式教学为核心,促进由“以教师为中心的知识传授方式”向“以学生为中心,激励自己去发现和创作的教学方式”转变。并经初步改革的教学实践证明该课程的改革是可行的。