取代2-四氢萘酮的一步合成新方法研究

本文介绍了一步法制备取代2-四氢萘酮的新方法,与常规合成方法相比,该法具有明显的优点:不需要先将羧酸转化成酰氯,避免了三氯化铝以及含氯溶剂的应用,并使催化剂得以循环利用。因此,该方法安全、环保,有望取代常规的付-克反应在工业上的应用。     

改性胶粉/SBR共混胶料的结构性能研究

研究了硫黄、促进剂、改性胶粉用量对胶粉／ＳＢＲ共混胶料性能的影响。结果表明；改性胶粉用量在１０－３５份的范围内．对共混胶料的静态力学性能影响不大：在１０－２２份的范围内对动态压缩疲劳生热影响不大．适当调整基质胶中硫黄、促进剂的用量．有利于降低胶料的动态压缩疲劳生热。扫描电子能谱微区分析的研究表明：由于硫黄的迁移形成了具有特殊结构的界面过渡层．该过渡层是降低动态压缩疲劳生热的关键。     

“中山舰”防腐保护研究

本文叙述了一种互穿网络防腐蚀涂料的性能,根据其试验结果,认为它适宜于作“中山舰”的防腐蚀和保护涂料。     

Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA

Polybutylene terephthalate (PBT)/acrylonitrile–butadiene–styrene (ABS) copolymer blends compatibilized by a mixture of styrene–acrylonitrile–maleic anhydride (ASMA) copolymers and epoxy resin (EP) were prepared through melt reactive extrusion. The morphological, rheological, and mechanical properties of these blends were studied. The epoxy functional groups of EP can react with anhydride groups of ASMA and the PBT terminal groups (? OH and ? COOH) simultaneously, leading to the formation of ASMA–EP–PBT graft copolymers. Because of the effective compatibilization of these copolymers at the interface, finer dispersed phase morphologies were obtained. Compared with PBT/ABS/ASMA blends, the addition of EP induced a more stable molten phase structure, with increases of storage moduli, loss moduli, and dynamic viscosities. Results indicated that 1.5 wt% of the EP in the blends was most suited for the compatibilization. Impact properties of these blends were also investigated. POLYM. ENG. SCI., 47:1943–1950, 2007. © 2007 Society of Plastics Engineers     

293K下K+/CO2-3,HCO3-、Cl-、H2O四元体系相图的研究--从农药废水中回收无机盐

用等温法测定了293K下K+/CO32-、HCO3-、Cl-、H2O四元体系的溶解度,根据溶解度数据绘制了相图,相图由KCl、KHCO3、K2CO3·3/2H2O、K2CO3·2KHCO3·3/2H2O四个相区组成.实验结果表明,K2CO3对KCl和KHCO3有强烈的盐析作用.以四元水盐体系相图理论作指导,对吡虫啉农药生产废水进行等温蒸发,分析计算了废水中各种盐的析出顺序及析出量,给出了分离氯化钾和碳酸钾较为理想的蒸发终止点,并提出了合理的工艺流程.     

Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes

Polypropylene (PP)/carbon composites were prepared via melt blending PP with carbon fillers, including multiwalled carbon nanotubes (MWNTs) and carbon black (CB). Field‐emission scanning electron microscopy was used to research the morphology and dispersion of fillers in the PP matrix. The electrical properties, mechanical properties, and crystallization behaviors of PP/carbon composites were also investigated. The results show that the influence of MWNTs on the properties of PP composites is different with CB, which can be ascribed to the structure and aspect ratio difference between MWNTs and CB. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4823–4830, 2006     

Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

废短纤维/橡胶复合材料的力学和疲劳性能

考察了橡胶再生废短纤维的表面特性和长度分布，研究了橡胶再生废短纤维／橡胶复合材料（ＷＳＦＲＣ）的力学性能以及纤维表面预处理对它的影响，探讨了它在橡胶工业中应用的可能性。对ＷＳ－ＦＲＣ的动态拉伸和压缩疲劳性能也进行了考察。结果表明：随着纤维用量的增加．ＷＳＦＲＣ的拉伸和压缩疲劳性能下降；与同样硬度的纯炭黑胶料相比，ＷＳＦＲＣ的疲劳温升更低；ＷＳＦＲＣ的疲劳性能还随纤维排列方向的不同而变化。     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

一次低烧SrTiO3基晶界层电容器的研究

研究了以Ｌｉ２ＣＯ３为助烧结剂、Ｓｒ（Ｌｉ１／４Ｎｂ３／４）Ｏ３为施主掺杂剂、Ｂｉ２Ｏ３和ＳｉＯ２为晶界绝缘剂的ＳｒＴｉＯ３基晶界层电容器的一次低温烧成技术。初步探索了Ｔｉ／Ｓｒ比值、施主掺杂剂、绝缘剂对显微结构及介电性能的影响。在１１５０℃烧成温度下，获得了εａｐｐ〉３．５×１０＾４；ｐ〉１．０×１０＾１１Ω·ｃｍ；ｔｇδ〈１．０％；ΔＣ／Ｃ〈±５．０％（－２５￣＋８５℃）的ＳｒＴｉＯ３基晶界层