Modified Indigo Method For Gaseous And Aqueous Ozone Analyses

The indigo method developed by Bader and Hoigné for aqueous ozone analysis was modified to allow for both gaseous and aqueous ozone determination. Gas or water samples were extracted with a gas-tight syringe containing a known volume of indigo reagent. The modified procedure provided a more consistent basis for gaseous and aqueous ozone determination allowing for more accurate ozone mass balance calculations. Direct gaseous ozone UV absorbance with molar absorptivity of 3,000 M^?1cm^?1 at 258 nm was used as primary standard to determine the molar absorptivity of the indigo reagent. The molar absorptivity of indigo reagent, assuming a 1:1 stoichiometric ratio for the reaction between indigo and ozone, was determined to be 23,150 ± 80 M^?1cm^?1, or approximately 16 percent higher than that of 20,000 M^?1cm^?1 suggested by Bader and Hoigné. An independently calibrated membrane-electrode ozone monitor showed good correlation with indigo method results using the molar absorptivity value determined in this study. The apparent molar absorptivity of aqueous ozone at the wavelength of 258 nm measured by the modified indigo method increased from 2,400 to 3,600 M^?1cm^?1 in the investigated ozone concentration range of 0.4 to 11.0 mg/L. This variation might have been caused by the inherent interference of unidentified ozone byproducts, which presence was supported with scanning spectra in the wavelength range of 200 to 300 nm.     

Fabrication and characterization of PFSI/ePTFE composite proton exchange membranes of polymer electrolyte fuel cells

PFSI/ePTFE composite proton exchange membranes were fabricated by impregnating perfluorosulfonic acid resin (PFSI resin, Nafion) into chemically modified expanded PTFE (ePTFE) matrix. Chemical modification of sodium-naphthalene treatment and N-methylol acrylamide (NMA) grafting decreased the contact angle of the as-received ePTFE from 125 ± 0.5° to 67 ± 0.5°, effectively converting the as-received hydrophobic ePTFE to a hydrophilic ePTFE matrix. The composite membrane fabricated with the hydrophilic ePTFE have higher impregnated PFSI loading, much lower porosity and better PTFE/PFSI interface contact, as compared to the composite membranes with the as-received ePTFE. This leads to much lower gas permeability and significantly improves the durability under an accelerated dry/wet cycle test. The fuel cell made from the PFSI/ePTFE composite membranes with hydrophilic ePTFE showed superior performance as compared to that with the composite membrane made from the as-received ePTFE and Nafion 211 membrane.     

基于仿射传播的有向网络聚类算法

现有大多数的网络聚类方法都只是针对无向网络, 已有的有向网络聚类方法建立在传统聚类算法基础之上, 存在着一定的局限性。针对上述问题, 提出一种基于仿射传播的有向网络聚类算法, 该算法首先采用SimRank作为节点之间的相似度, 并将计算得到的结果转换为适应于仿射传播算法的负值; 然后将相似度矩阵作为输入, 利用具有更好性能的仿射传播算法对有向网络进行聚类。实验结果表明, 所提出算法的聚类性能优于其他几种具有代表性的有向网络聚类算法。     

果酸脂质体的制备、检测及应用

以大豆卵磷脂为包封材料 ,用反相蒸发法制备果酸脂质体。并用透射电子显微镜表征了其形态结构 ,证实其直径在1 0 0纳米～ 2 0 0纳米之间。研究了果酸浓度对包封率 ,稳定剂浓度对脂质体稳定性的影响。结果表明 ,果酸浓度为 0 .3mg/ml时可以得到较好的包封率 ,丙二醇的适宜浓度是 5 % -1 5 % ,最终将脂质体应用于化妆品中 ,并证明是可行的     

Influence of processing on ethylene propylene block copolymers (II): Fracture behavior

The present work investigates the relationships between the microstructural state and fracture properties in commercial polypropylene‐based materials. In this case an isopolypropylene homopolymer and three ethylene propylene block copolymers (EPBC) with different ethylene content (EC) have been studied. A variety of morphologies were obtained by a combination of several processing methods (injection molding, injection molding‐annealing, and compression molding) and thickness. Fracture behavior of deeply double‐edged notched specimens was evaluated by scanning electron microscopy (SEM) and by the essential work of fracture (EWF) method, analyzing the influence of processing, thickness (t), EC, and orientation respect to melt flow direction (MD and TD). The testing direction and EC are the most relevant variables that affect the ability of the crack tip to deform plastically during the crack propagation, determining the final fracture behavior. The fracture parameters obtained with the EWF method, specific EWF, w_e, and plastic item, βw_p, have proved to be very sensitive to the processing induced morphology, finding interesting relationships between such morphologies (characterized by crystallinity index, orientation level, and skin/core ratio) and the fracture parameters of the plaques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2714–2724, 2006     

Nutritional recovery of mild and moderately malnourished children under two different treatment approaches (ambulatory versus day-care)

This retrospective analysis was conducted between May 1997 and May 2000 at the Centro de Atención Nutricional Infantil de Antímano, CANIA, in Caracas, Venezuela to assess the efficacy of two treatments (ambulatory versus day-care) of mild and moderate malnourished children. Inclusion criteria were: children under 10 years old with mild and moderate malnourishment, who attended a minimum of 3 control visits during a period of 12 months. One hundred fourteen malnourished children were included: fifty seven in ambulatory treatment and fifty seven in day-care treatment paired per nutritional diagnosis, gender and age (thirty nine mild and eighteen moderate malnourished children). The nutritional recovery criterion was weight for height above tenth percentile. No relation was found between treatment approaches and nutritional recovery at 3 and 6 months of treatment. In the group of mild malnourished children, the percentage of recovered patients at 3 months of treatment, that kept their recovered condition at 6 months was 83% (15/18) in the ambulatory treatment and 82% (18/22) in the day-care treatment Age of children, associated disease, acute morbidity, dietetic risk and mother's education and age were not associated with nutritional recovery at 6 months of treatment (p > 0.05). The day-care approach resulted as effective as ambulatory in mild malnourished children. In moderate malnourished new studies will need to be conducted with greater number of patients.     

STM32的双路信号源及其配置平台设计

针对目前测量分析、弱信号检测的需求,以STM32F107和AD9958为核心实现了一种高分辨率幅度、频率、相位的双路信号源。首先对直接数字合成(Direct Digital Synthesis,DDS)工作原理进行介绍,重点分析了杂散的主要来源,并设计LC椭圆低通滤波器对杂散进行抑制。设计输出电路使信号源满足低频需求,并可直接用于驱动负载。最后采用STM32F107和VC6.0搭建了配置平台,对信号源波形灵活控制。     

试述疗养院信息化建设

当今社会疗养院建设快速推进,疗养院卫生信息化发展极为迅速.那么疗养院怎样根据自身情况,提高疗养院整体管理水平、规范各项医疗工作,已成为一个迫切需要解决的问题.这就要求疗养院必须提高自己的自身信息化建设水平,必须跟上社会卫生信息化建设步伐.本文对疗养院信息化建设的基本情况、遇到的主要问题及其今后发展的趋势进行了探讨.以促进疗养院信息化建设迅速健康的发展.     

Modèles Hydrodynamiques pour la Séparation des Courants dans un Décanteur Pilote

Despite of its general use in industry, particle sedimentation is still a not well understood unit operation. Hydrodynamics is complex in essence, mainly because the possible volumes are depending on the operating conditions, which in turn has consequences on the stability of the equipment in unsteady state conditions.     

齐鲁文化精神对中国传统体育文化的影响

本文主要论述了齐鲁文化所表现出来的和合精神、人道主义精神、厚德仁民精神、大公无私精神、自强不息精神等,对中国传统体育文化产生的重要影响。