氟化铝生产废水处理工艺的研究

对氟化铝生产废水的处理方法进行了研究。结果表明，一级中和沉淀法和二级中和二级沉淀法均不宜用于氟化铝生产废水的结果，理想的处理方法是碱过量中和酸回调法，辅加氯化钙的石灰乳中和法也可考虑采用。     

浅谈高校基础投资成本的全过程控制

高校基本建设项目的投资成本发生在项目建设的各个过程之中。项目建设的全过程都应该控制投资成本。在可行性研究和设计等前期,应该执行限额设计的目标管理制度。在施工期间应该严格执行合同,对工程签证、工期等实行严格控制。付款方式也是投资成本控制的有效手段。     

超高分子相对质量部分水解聚丙烯酰胺合成研究

选择AM均聚后水解工艺路线,采用新型复配引发体系,合成作为油田驱油剂的超高相对分子质量聚丙烯酰胺(简称PAM).在所选高效的引发体系下,考察了主要聚合反应因素对产品平均分子相对质量的影响,确定了聚合工艺条件溶液的pH值为11～11.5,W(单体)为45%,W(引发剂)为70×10-6,W(链转移剂)为1.3×10-6.在优化的聚合条件下,合成了相对分子质量高达25×106,水解度在20%～30%可调,过滤比小于1.3的聚丙烯酰胺.     

碱式硫酸镁晶须的合成及应用

以一定浓度的MgSO4和NaOH溶液为原料,在常温下混合,在160℃,0.5 MPa的条件下用水热法反应8 h,制备出增强阻燃材料MgSO4.5Mg(OH)2.3H2O型碱式硫酸镁晶须(MOS),探讨了反应条件对产物形貌、结构及组成的影响,初步确立了制备MOS的工艺条件。经过对复合材料的拉伸性能测试得出结论,采用MOS填充改性的聚丙烯,优于市售纳米氢氧化镁和阻燃级氢氧化镁。     

复合矿物功能掺合料对粉煤灰激活增强的研究

根据激发粉煤灰活性机理研制了一种复合矿物功能掺合料,针对其对粉煤灰活性激发增强效果进行了系统研究。结果表明,用Ⅱ级粉煤灰、复合矿物功能掺合料置代50%以上水泥配制的胶砂、普通混凝土和高性能混凝土的早期强度、后期强度均大幅度提高。其中强度等级C15-C100 的混凝土不仅单方可节约水泥 50%以上,而且其强度较单掺粉煤灰有显著提高,具有显著的经济和社会效益。     

高温高压设备瞬态密封分析的三维力学与传热学模型

以大型加氢反应器的高压法兰密封结构为研究对象，建立了瞬态及稳态密封分析的三维力学与传热学模型，主要解决了螺栓载荷的动态模拟和螺栓孔内空气环层的传热计算问题。利用该模型对加氢反应器的瞬态及稳态密封状况进行了计算。     

Miniemulsion and conventional emulsion copolymerization of styrene and butadiene: Effect of process on gel content

The properties of styrene/butadiene copolymers obtained by conventional emulsion and miniemulsion polymerizations were studied. Thin layer chromatography with flame ionization detection was used to determine the gel fraction of the copolymer in the latex particles as a function of conversion. It was found that the gel formation began at a higher conversion in the miniemulsion polymerization when compared with that in the conventional process. Also, a lower glass transition temperature was noted at the lowest conversion sampled (～25%), implying a higher initial butadiene monomer concentration within the nucleated miniemulsion monomer droplets when compared with particles formed conventionally. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4616–4622, 2006     

Coloring effect of the organic hybrid of polyamide 6 and N,N′‐ethylene‐bis(tetrabromophthalimide)

Coloring study in organic hybrid of polyamide (PA6) and N,N′‐ethylene‐bis(tetrabromophthalimide) (EPT), where the chromophore was self‐assembled by hydrogen bonding formed between PA6 molecular chains and EPT compound, have been characterized by several techniques. CS930 double wavelength lamella scanner was employed to measure the change of color. The existence of hydrogen bonding in PA6/N‐N′‐ethylene‐bis (tetrabromophthalimide) (PA6EPT) was investigated with Fourier transform infrared (FTIR), the results of which were compared with that of PA6 with the same thermal history. FTIR spectra at room temperature revealed that there is essentially hydrogen bonding between PA6 and EPT. The crystallization behavior of PA6EPT affected by hydrogen bonding was studied by using FTIR. The temperature‐dependent behavior of both PA6 and PA6EPT was studied by temperature‐FTIR spectroscopy and differential scanning calorimetry (DSC). With temperature increasing, changes in sensitive, high‐resolution absorbance spectra are observed as dissolve‐volatilizing thin film. Temperature‐FTIR results showed that the hydrogen bonding in PA6EPT attenuated and dissociated considerably at a smaller rate than PA6, that is to say, hydrogen bonding in PA6EPT is more stable than that in PA6. DSC showed that the melting temperature of PA6EPT and PA6 are similar. However, the crystalline degree and crystalline temperature and melting enthalpy of PA6 and PA6EPT are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 594–600, 2007     

Preparation and characterization of rubber‐toughened poly(trimethylene terephthalate)/organoclay nanocomposite

Rubber‐toughened poly(trimethylene terephthalate) (PTT)–organoclay nanocomposite (RTPTTCN) was prepared by a melt mixing technique. The rubber‐toughened PTT (RTPTT) was made by blending it with ethylene propylene diene terpolymer (EPDM) and with a small amount of maleated EPDM as a compatibilizer. XRD and TEM analysis indicated that the RTPTTCN forms a partially exfoliated nanocomposite. It was observed from SEM analysis that the clay nanoparticles induced a reduction of rubber particle size in the PTT matrix. Tensile and dynamic mechanical analysis indicated that the clay nanoparticles enhance the stiffness of the RTPTT without adversely affecting its toughness. Melt rheological studies revealed that the nanocomposites exhibited strong shear thinning behavior, and a percolated network of the clay particles was formed. It was also observed from DSC that the clay nanoparticles caused an increase in the nonisothermal crystallization temperature of the PTT. POLYM. ENG. SCI., 47:863–870, 2007. © 2007 Society of Plastics Engineers