Removal of polyaromatic hydrocarbons from scrap tires by solvent extraction

This study analyzes polycyclic aromatic hydrocarbon (PAH) compounds released from scrap tires by GC/MS and introduces a simple extraction process at ambient conditions to remove PAHs from scrap tires. The PAH species released from scrap tires included seven PAH compounds with high molecular weight and 4- and 5-aromatic rings and total-PAH content of 159 mg/L. When scrap tires were extracted using hot water (180 °C) for 3 h, the overall removal efficiency was 53%, indicating that PAHs were not adequately removed by this method. However, using organic solvents, the overall PAH removal efficiency improved to 82% for propionic acid and 70% for acetic acid, because the mass transfer of PAHs within scrap tires increases with decreasing dielectric constant. The PAH removal efficiency was dependent on solvent type and temperature.     

Tuning the electronic band structure of PCBM by electron irradiation

Tuning the electronic band structures such as band-edge position and bandgap of organic semiconductors is crucial to maximize the performance of organic photovoltaic devices. We present a simple yet effective electron irradiation approach to tune the band structure of [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM) that is the most widely used organic acceptor material. We have found that the lowest unoccupied molecular orbital (LUMO) level of PCBM up-shifts toward the vacuum energy level, while the highest occupied molecular orbital (HOMO) level down-shifts when PCBM is electron-irradiated. The shift of the HOMO and the LUMO levels increases as the irradiated electron fluence increases. Accordingly, the band-edge position and the bandgap of PCBM can be controlled by adjusting the electron fluence. Characterization of electron-irradiated PCBM reveals that the variation of the band structure is attributed to the molecular structural change of PCBM by electron irradiation.     

Synthesis of poly(ε‐caprolactone)/clay nanocomposites using polyhedral oligomeric silsesquioxane surfactants as organic modifier and initiator

Poly(ε‐caprolactone)/clay nanocomposites were synthesized by in situ ring‐opening polymerization of ε‐caprolactone in the presence of montmorillonite modified by hydroxyl functionalized, quaternized polyhedral oligomeric silsesquioxane (POSS) surfactants. The octa(3‐chloropropyl) polyhedral oligomeric silsesquioxane was prepared by hydrolytic condensation of 3‐chloropropyltrimethoxysilane, which was subsequently quaternized with 2‐dimethylaminoethanol. Montmorillonite was modified with the quaternized surfactants by cation exchange reaction. Bulk polymerization of ε‐caprolactone was conducted at 110°C using stannous octoate as an initiator/catalyst. Nanocomposites were analyzed by X‐ray diffraction, transmission electron microscopy, thermo gravimetric analysis, and differential scanning calorimetry. Hydroxyl functionalized POSS was employed as a surface modifier for clay which gives stable clay separation for its 3‐D structure and also facilitates the miscibility of polymer with clay in the nanocomposites due to the star architecture. An improvement in the thermal stability of PCL was observed even at 1 wt % of clay loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)

Ni-YSZ cermet anode supports solid oxide fuel cells (SOFCs) were fabricated by high-frequency induction heated sintering (HFIHS) under 60 MPa pressure with powders synthesized by the glycine nitrate process (GNP) as well as mechanically mixed commercial powders. The HFIHS method created a uniformly porous microstructure without abnormal grain growth compared to the conventional sintering method. Samples sintered by HFIHS show higher strength and electrical conductivity than conventionally sintered samples, even though they have similar porosity.     

Effect of the amount of reducing agent on surface structures, electrochemical activity and stability of PtRu catalysts

The effect of the amount of reducing agent used in the synthesis of PtRu alloy catalysts on their surface structure was investigated, and the prepared catalysts were characterized using transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, cyclic voltammetry, and potential cycling. The alloying degree of the catalysts was essentially the same for all of the catalysts studied, despite the use of different amounts of reducing agent. Varying the amount of reducing agent resulted in changes in the surface composition of the catalysts, wherein the surfaces were found to be composed of several PtRu domains that differed in local inhomogeneity and hence showed differences in activity for CO_ad oxidation. The highest activity for methanol oxidation was obtained when there was moderate Ru enrichment of the catalyst. The electrochemical stability of the catalysts was also investigated via potential cycling in a methanol-containing electrolyte solution. The electrochemical stability under methanol oxidation was enhanced by Ru-enrichment at the catalyst surface, because the Ru-rich surface had sufficient Ru atoms near the Pt atoms to act as a bifunctional catalyst, even though the Ru atoms were leached out by potential cycling. The most Ru-rich catalyst exhibited an increase in methanol oxidation current in the middle of potential cycling whereas the other catalysts showed a monotonic decrease.     

Preparation and characterization of high‐molecular‐weight sericin by γ irradiation

We conducted this study to examine the changes in the molecular structure and physiological activities of silk sericin after γ irradiation. Sericin from Bombyx mori was extracted with an Na₂CO₃ solution. The molecular weight distribution of sericin increased in the gel permeation chromatography and sodium dodecyl sulfate/polyacrylamide gel electrophoresis results as the irradiation dose increased. Circular dichroism data also revealed that the α‐helix contents decreased with the irradiation dose. Ultraviolet absorption was shown a different pattern between the irradiated and unirradiated sericin. However, the Fourier transform infrared spectrum was not changed in all of the groups. Furthermore, the irradiated sericin was significantly increased in 2,2‐diphenyl‐1‐picryl‐hydrazil radical scavenging, and the tyrosinase inhibitory activities increased with irradiation dose. Therefore, γ irradiation was an effective method for producing high‐molecular‐weight sericin and for developing functional foods and cosmetics. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

Analysis of microbial adaptation at enzyme level for enhancing biodegradation rate of BTX

Catechol was found to be a common intermediate in the degradation of benzene and toluene byAlcaligenes xyhsoxidans Y234, and the ring cleavage of the catechol mediated by catechol 1,2-dioxygenase was a rate-determining step. Since benzene induced higher level of catechol 1,2-dioxygenase than toluene, the cells pre-adapted to benzene showed higher degradation rate of benzene and toluene. The degradation rate ofm-xylene was also increased significantly when benzene-adapted cells were inoculated.m-Xylene was metabolized via 3-methyl catechol which was effectively cleaved by catechol 1,2-dioxygenase.     

Adaptive neuro-fuzzy inference system based faulty sensor monitoring of indoor air quality in a subway station

A new faulty sensor monitoring method based on an adaptive neuro-fuzzy inference system (ANFIS) is proposed to improve the monitoring performance of indoor air quality (IAQ) in subway stations. To enhance network performance, a data preprocessing step for detecting outliers and treating missing data is implemented before building the monitoring models. A squared prediction error (SPE) monitoring index based on the ANFIS prediction model is proposed to detect sensor faults, where the confidence limit for the SPE index is determined by using the kernel density estimation method. The proposed monitoring approach is applied to detect four typical kinds of sensor faults that may happen in the indoor space of a subway. The prediction results in the subway system indicate that the prediction accuracy of an ANFIS structure with 15 clusters is superior to that of an appropriate artificial neural network structure. Specifically, when detecting one kind of complete failure fault that happened within the normal range, the detection performance of ANFIS-based SPE outperforms that of a traditional principal component analysis method. The developed sensor monitoring technique could work well for other kinds of sensor faults resulting from a noxious underground environment.