中国电子商务思考

网络经济持续走低，但电子商务的发展大方向是不会改变的。在中国，目前的主要问题是宽带网的重复建设、认证机构建设缺乏有效监管、电子商务立法滞后、物流配送系统不完善、标准化问题成为电子商务发展的障碍等，当前应做的主要是：政策的宏观引导、示范推广、加强对宽带网和认证机构建设的监管等。     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

喷射轧制Fe-4.5%Si硅钢片的组织和性能

采用喷射成形和轧制工艺制备了厚度为0.5mm的Fe-4.5%Si高硅钢片，并对其密度、显微组织和电磁性能进行了测试分析，研究结果表明：在最佳的喷射成形和轧制工艺条件下，所制备硅钢片的磁感应强度B25为1.544T、B50为1.641T；铁损P1050为1.437W/kg、P1550为3.43W/kg，说明喷射成形轧制技术可以制备出高磁感应强度、低铁损的高硅钢片。     

面向21世纪课程教材对地方综合大学电工学教学改革的影响--广西大学使用面向21世纪电工学课程系列教材的实践与探索

阐述了我校使用“面向21世纪”电工学课程系列教材的实践与探索过程，以及对我校电工学教学所产生的转折性影响和积极的导向作用，最后对教材提出了几点建议。     

基于POSC的测井曲线数据存储管理系统

在基于POSC标准的基础上，分析了POSC EPICENTER数据模型，对油田中普遍使用的LS716测井大块数据在磁盘和远程自动磁带库之间实现了一体化的数据管理，开发了数据加载，数据删除，头信息浏览线回施行能模块。该系统特点是，管理信息加载到POSC数据仓中，而真正的数据体以外部数据文件的形式存放，使得大块数据的加载和提取速度大大提高，同时，在数据仓库和远程带库之间实现了一体化的数据管理。     

祝贺《农机推广与安全》杂志全新出版

随着农村经济的发展和产业结构的调整,广大农民在生产中对新技术及农机具产品的需求日益多样化,特别是农业产前和产后适用机械装备的应用,逐步显现出了新的市场前景,农业机械化的发展已经逐步深入到农业生产的各个环节和农村经济建设的各个领域.因此,农机的新技术推广与安全运用,是在新形势下促进农机化健康发展的重要任务.     

AutoCAD 下非结构网格自动生成

在AutoCAD环境下，从背景网格生成和数据结构两方面对推进阵面法进行修正。采用修理后的方法，使得在流场、泥沙输移和床面冲淤数值计算的前处理过程中无须精心预设内部控制点而只需给边界一个尺度，就能自动生成适应任意复杂边界的非结构网格，从而提高网格生成、优化的效率和通用性。     

企业培训中心的六个主要特征

提出企业培训中心的本质特征,并以此为基点阐述企业培训中心的六个主要特征;通过对企业培训中心的使命、培训对象的确定、培养目标、培训内容、组织设置、组织发展的分析,力求揭示企业培训中心组织构建和发展的自身规律。     

The Synthesis of Sulfated Titanium Oxide Nanotubes

TiO₂ nanotubes can be prepared in gram quantities by treating anatase TiO₂ powder with concentrated NaOH solution. These TiO₂ nanotubes acquired strong acidity after being impregnated with sulfuric acid solution and calcined at 300 °C. The anatase TiO₂ powder used to prepare the nanotube did not catalyze the esterification between cyclohexanol and acetic acid, while sulfated TiO₂ nanotubes were very reactive toward the esterification reaction.     

舰船水声隐身技术(二)

本文探讨了水声隐身性能对舰船战技术性能的影响 ,舰船水噪声的主要噪声源、水噪声的治理措施及其展望。