激光抛光技术的发展与展望

介绍激光抛光技术的发展历史,阐明激光抛光的应用现状及未来的发展前景,论述了激光抛光的工艺特点和作用机理,将激光抛光技术与其它抛光技术进行了全面的对比,指出激光抛光的优势及其存在的问题。     

Control of stroma-dependent hematopoiesis by basic fibroblast growth factor: stromal phenotypic plasticity and modified myelopoietic functions

The immunological agglutination reactions of physically absorbed F(ab')2 molecules onto anionic and cationic latex particles have been investigated by means of optical absorbance measurements. These measurements have been conducted under different conditions to determine the most influential factors. Surface F(ab')2 and BSA densities, particle concentration in the reaction medium and polyethylene glycol concentration are some of these factors. Sensitized cationic and anionic latexes differ considerably with respect to their colloidal stability and reactivity. As a general rule, the sensitized cationic latex has a relatively higher colloidal stability and hence, it provides reagents with a better optical response. Less than 0.025 microgram/ml of C-reactive protein has been detected using this particle enhanced optical immunoassay.     

Applications of a super element model for non-linear analysis of stiffened box structures

Numerical investigations are carried out to verify the new super element model developed in Reference 1 for non-linear analysis of stiffened box structures. The results presented here are obtained from a variety of examples which are chosen to illustrate the accuracy and convergence of the model in various applications. Good agreement is obtained for most of the problems considered and the present formulation is found to be accurate and economical for preliminary engineering design.     

SiC（w）／TZP＋mullite陶瓷复合材料界面和组成设计与力学性能

本文从理论上分析了ＳｉＣ（ｗ）ＴＺＰ＋ｍｕｌｌｉｔｅ（ｐ）复合材料界面残余热应力及其在基质内的分布规律。提出在ＳｉＣ（ｗ）表面涂复Ａｌ２Ｏ３和在ＰＺＴ中加入ｍｕｌｌｉｔｅ（ｐ）联合作用来降低晶须／基质界面残余热应力的界面设计方案，导出ＳｉＣ（ｗ）和ｍｕｌｌｉｔｅ（ｐ）协同补强ＰＺＴ的匹配条件。制备了ＳｉＣ（ｗ）／ＴＺＰ＋ｍｕｌｌｉｔｅ（ｐ）复合材料并了ＳｉＣ（ｗ）表面涂层Ａｌ２Ｏ３厚度和ＳｉＣ（ｗ     

PP－g－AA的制备和表征

用熔融接枝方法制备了聚丙烯－ｇ－丙烯酸（ＰＰ－ｇ－ＡＡ）。用光电子能谱，广角Ｘ射线衍射，红外光谱和化学滴定方法对接枝物进行了定性和定量表征。讨论了单体和引发剂浓度对接枝率的影响，确定了用红外光谱法测定接枝物含量的经验公式     

CF/ABS树脂复合材料制备工艺对导电性能的影响及对屏蔽性能的理论预测

本文研究了使用溶剂法、密炼机和开炼机混炼碳纤维填充ABS树脂复合材料的导电性能,得到了纤维填充量与复合材料电阻率的关系,对其导电机理进行了分析.通过比较,发现纤维长径比是决定复合材料导电性能的重要因素,其它如纤维在基体中的分布也对复合材料导电性能有影响.最后对复合材料的屏蔽性能进行了理论计算.     

BEM 系列原油流动性改进剂的应用

对BEM系列原油流动性改进剂的基本原理以及在中洛、濮临、东临、东黄、鲁宁、魏荆等几条原油长输管道工业应用的现场测试情况进行了介绍。结果表明，BEM系列原油流动性改进剂在降低原油凝点和粘度方面性能良好，能满足管道安全，平稳运行的要求。     

面向表面微加工工艺的微器件设计框架的研究

本文以微器件设计为对象，对微硅表面制造驱动的微器件并行设计方法学及相应的计算机辅助设计工具的开发逻辑进行了研究，提出了采用基于三层Web-ASP集成框架实现e-CAD原型工具的编程方案，其中，并行任务流管理与控制，微器件实例及设计资源库，微加工工艺规划及仿真，微器件设计评价等是该系统实现的关键要素，在此基础上将建立网上微器件设计中心，并通过应用服务机制，实现对微器件设计工具使用的商务化，以达到降低设计成本，加快MEMS产业化之目的。     

新国标烯烃限值的无铅汽油对汽车耐久性能的影响

选用3种轿车,使用烯烃含量接近新国标限值35％的无铅汽油,行驶8×10~4km,进行整车和发动机台架检测,并对进气阀和喷嘴进行评定。试验结果表明,在行驶8×10~4km后,整车的动力性、经济性很稳定,电喷车的排放检测值符合现行国标的限值要求;进气阀较清洁,喷嘴流量损失小;发动机外特性、比油耗、活塞窜气量、汽缸压缩压力等都变化不大。这说明,符合现行国标烯烃限值要求的无铅汽油适合目前我国汽车的使用并能满足现行排放法规的要求。