Activated gas plasma surface treatment of polymers for adhesive bonding

Polyethylene, polypropylene, poly(vinyl fluoride) (Tedlar), polystyrene, nylon 6, poly(ethylene terephthalate) (Mylar), polycarbonate, cellulose acetate butyrate, and a poly(oxymethylene) copolymer were treated with activated helium and with activated oxygen. Mechanical strengths of adhesive-bonded specimens prepared from treated and from untreated coupons were compared. Polyethylene (PE) and polypropylene (PP) showed the greatest increases in bond strength. Oxygen and helium were both effective with polyethylene, but polypropylene showed no improvement when treated with activated helium. The results with excited helium parallel the effects of ionizing radiation on these two polymers, as does the appearance of unsaturation bands in the infrared (965 cm^?1 in PE, and 887 and 910 cm^?1 in PP). Active nitrogen produced excellent bond strength with polyethylene but not with polypropylene. Of the remaining polymers examined, Tedlar, polystyrene, and nylon 6 showed the greatest improvement in bondability after treatment, and Mylar showed moderate improvement. Polycarbonate, cellulose acetate butyrate, and the poly(oxymethylene) copolymer gave approximately two-fold increases in lap-shear bond strength. In several cases, significant differences in response to time of treatment and type of excited gas were found.     

The synthesis and characterization of calcium aluminate monoiodide

The hydrated calcium aluminate AFt and AFm phases are known hosts for a wide variety of chemical species. This characteristic is beneficial to those using portland cement to solidify/encapsulate radioactive waste which more often than not contains a wide variety of elements. In order to investigate the potential of the calcium aluminate hydrates as host phases for selected ions, the following experiments were carried out. Bottle hydration studies (water/solid > 1) were used to investigate the suitability of the AFt and AFm phases as hosts for iodine, one of the more mobile radioactive waste elements. Trial compositions along the AFt and AFm joins in the systems 3CaO·Al₂O₃---CaSO₄---CaI₂---H₂O were investigated. No stable iodine end-member AFt phase was formed at room temperature. The end-member AFm phase, 3CaO·Al₂O₃·CaI₂·12H₂O, was synthesized and was designated monoiodide. Characterization was carried out using chemical analysis, scanning electron microscopy, x-ray diffraction (conventional and high temperature), thermogravimetric analysis and differential thermal analysis. Monoiodide was indexed as hexagonal and thus isostructural with previously described AFm phases. Monoiodide is stable to about 85°C. A loss of approximately four molecules of water occurs between 71° and 101°C. The lower hydrate, tentatively identified as 3CaO·Al₂O₃·CaI₂·8H₂O, is stable to approximately 300°C. The latter hydrate was observed to revert to the original hydrate on exposure to the relative humidity in the laboratory.     

A predicted three-dimensional structure of human cytochrome P450: implications for substrate specificity

A three-dimensional structure for human cytochrome P450IA1 waspredicted based on the crystal coordinates of cytochrome P450camfrom Pseudomonas putida. As there was only 15% residue identitybetween the two enzymes, additional information was used toestablish an accurate sequence alignment that is a prerequisitefor model building. Twelve representative eukaryotic sequenceswere aligned and a net prediction of secondary structure wasmatched against the known -helices and ß-sheets ofP450cam. The cam secondary structure provided a fixed main-chainframework onto which loops of appropriate length from the humanP450IA1 structure were added. The model-built structure of thehuman cytochrome conformed to the requirements for the segregationof polar and nonpolar residues between the core and the surface.The first 44 residues of human cytochrome P450 could not bebuilt into the model and sequence analysis suggested that residues1–26 formed a single membrane-spanning segment. Examinationof the sequences of cytochrome P450s from distinct gene familiessuggested specific residues that could account for the differencesin substrate specificity. A major substrate for P450IA1, 3-methyl-cholanthrene,was fitted into the proposed active site and this planar aromaticmolecule could be accommodated into the available cavity. Residuesthat are likely to interact with the haem were identified. Thesequence similarity between 59 eukaryotic enzymes was representedas a dendrogram that in general clustered according to genefamily. Until a crystallographic structure is available, thismodel-building study identifies potential residues in cytochromeP450s important in the function of these enzymes and these residuesare candidates for site-directed mutagenesis.     

Isosteric heat of sorption of CO2 in poly(ethylene terephthalate)

Sorption isotherms for carbon dioxide in poly(ethylene terephthalate) have been measured at 35–55°C. The isotherms were measured gravimetrically on a Mettler Thermoanalyzer-1 from vacuum to 1 atmosphere. The sorption data were used to generate sorption isotherms from which the isosteric heat of sorption of CO₂ in PET was determined. At 45°C the isosteric heat of sorption increases from −10 kcal/mole at a concentration of 0.5 cm³ (STP)/cm³ (polymer) to −8 kcal mole⁻¹ at a concentration of 1.5 cm³ (STP)/cm³ (polymer). It has been reported in the literature that the isosteric heat of sorption for this system decreased through a minimum before increasing with increasing concentration. Our measurement of the low-pressure sorption isotherms shows that this is not the case.     

NN-based Prediction Interval for Nonlinear Processes Controller

Neural networks (NNs) are extensively used in modelling, optimization, and control of nonlinear plants. NN-based inverse type point prediction models are commonly used for nonlinear process control. However, prediction errors (root mean square error (RMSE), mean absolute percentage error (MAPE) etc.) significantly increase in the presence of disturbances and uncertainties. In contrast to point forecast, prediction interval (PI)-based forecast bears extra information such as the prediction accuracy. The PI provides tighter upper and lower bounds with considering uncertainties due to the model mismatch and time dependent or time independent noises for a given confidence level. The use of PIs in the NN controller (NNC) as additional inputs can improve the controller performance. In the present work, the PIs are utilized in control applications, in particular PIs are integrated in the NN internal model-based control framework. A PI-based model that developed using lower upper bound estimation method (LUBE) is used as an online estimator of PIs for the proposed PI-based controller (PIC). PIs along with other inputs for a traditional NN are used to train the PIC to predict the control signal. The proposed controller is tested for two case studies. These include, a chemical reactor, which is a continuous stirred tank reactor (case 1) and a numerical nonlinear plant model (case 2). Simulation results reveal that the tracking performance of the proposed controller is superior to the traditional NNC in terms of setpoint tracking and disturbance rejections. More precisely, 36% and 15% improvements can be achieved using the proposed PIC over the NNC in terms of IAE for case 1 and case 2, respectively for setpoint tracking with step changes.

     

EDITORIAL

The process undertaken by an information seeker, in order to form relevance decisions regarding documents, is defined as “Document Triage.” To better facilitate users’ needs in their triage activities, interactive interfaces have begun to evolve within on-line academic repositories. In order to complement current work on interface design and interaction, and produce custom guidelines to inform the creation of triage interfaces, we examine how interfaces that alter the document presentation and structure affect information seekers’ visual and navigational attention. We present a set of heuristics for both creating and evaluating such interfaces.     

Interval or moments: which carry more information?

In many practical situations, we do not have enough observations to uniquely determine the corresponding probability distribution, we only have enough observations to estimate two parameters of this distribution. In such cases, the traditional statistical approach is to estimate the mean and the standard deviation. Alternatively, we can estimate the two bounds that form the range of the corresponding variable and thus, generate an interval. Which of these two approaches should we select? A natural idea is to select the most informative approach, i.e., an approach in which we need the smallest amount of additional information (in Shannon’s sense) to obtain the full information about the situation. In this paper, we follow this idea and come up with the following conclusion: in practical situations in which a 95 % confidence level is sufficient, interval bounds are more informative; however, in situations in which we need higher confidence, the moments approach is more informative.     

Taking science education beyond schooling

Abstract

The shape and content of science education has always been articulated from the scientist's perspective. Recently, an increasing number of science educators have recognized the serious limitations of this perspective and have proposed to define scientific literacy from societal or citizenship perspectives. In this article, I argue that these alternatives will remain as limited as their predecessors unless the very structures of schooling are called into question. Furthermore, I argue that alternatives cannot be designed at the drawing board by theoreticians, but have to be grounded in praxis, thereby providing concrete trajectories along which science education can actually change.