Quantitative determination of aflatoxin B1 in chick liver

A method for the rapid and quantitative determination of aflatoxin B1 from small quantities of liver, around 1-2 g, is described. The extraction procedure involves acidification to pH 2 of the aqueous liver homogenates, extraction with chloroform: acetone and HPLC-fluorimetric detection after derivatization with trifluoroacetic acid. Quantitative recovery of aflatoxin B1 from chick liver was achieved and detection at levels of 0.2-1 ppb was proved feasible. The aflatoxin B1 concentration in chick liver after oral administration is also shown.     

Crystallization of amorphous Ni60 Nb40−x Cr x alloys

Crystallization behaviour of amorphous Ni₆₀ Nb_40-x Cr _x (x = 0, 5, 10 and 13 at%) alloys was studied by differential Scanning calorimetry and X-ray diffraction measurements. It is shown that the addition of chromium reduces the crystallization temperature, stages of crystallization and activation energies associated with the crystallization sages of the Ni₆₀Nb₄₀ glass. Crystallization of the Ni₆₀Nb₄₀ glass occurred in three stages; in the initial stage a metastable M-phase formed in the amorphous matrix as reported earlier [1] . However, contrary to earlier observation [1], M -phase was not very stable and transformed together with some amorphous phase to the equilibrium Ni₃Nb phase in the second stage of crystallization. In the third stage, the remaining amorphous matrix transformed to the equilibrium NiNb phase. On addition of chromium the formation/stability of the M-phase was found to be suppressed and equilibrium NbCr₂ phase precipitated preferentially in the first stage. The second stage, corresponding to the formation of Ni₃Nb phase, remained almost unaltered. The third stage corresponding to the crystallization of NiNb phase disappeared completely at 13 at% Cr. In the fully crystallized samples the proportion of the NiNb phase decreased and that of NbCr₂ phase increased continuously with chromium concentration.     

Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

Toughening of Dental Porcelain by Tetragonal ZrO2 Additions

The effect on mechanical behavior of ZrO₂ additions to a dental porcelain was investigated. The ZrO₂ was introduced into the glassy matrix phase of the porcelain by refritting the all-glass porcelain constituent. X-ray diffraction indicated that a sizeable fraction of the ZrO₂ was retained in the tetragonal form after the porcelain was fired. Zirconia additions to the porcelain produced substantial improvements in fracture toughness, strength, and thermal shock resistance.     

Elastic-Plastic Contact Damage in a Lead Lanthanum Zirconate Titanate

Spherical indenters were used to produce elastic-plastic contact damage in a lead lanthanum zirconate titanate (PLZT) under conditions of quasi-static and impact loading. The extent of radial cracking produced under both loading conditions showed good correlation with the response predicted by an earlier fracture mechanics analysis for quasi-static conditions. Calculated radial crack lengths corresponding to conditions of impact loading exhibited excellent agreement with experimentally measured values. The dynamic hardness of the PLZT was determined to be ∼ 1.5 times the quasi-static hardness. Differences in the radial crack lengths produced under the two loading conditions were attributed primarily to this difference in hardness response.     

Dissolution Profiling of Six Modified-Release Oral Solid Dosage Forms

Dissolution testing was conducted for six non-combination, single entity, modified-release oral solid dosage forms. Dissolution medium was water and 0.1 N hydrochloric acid. USP Apparatus 1 and Apparatus 2 were used arid were rotated at either 50 or 100 rpm. A complete dissolution profile was obtained for all six dosage forms based on their stated dosing interval, D. The three strengths of Theo-dur tablets, Norpace CR 150 mg capsules, and the two strengths of Chlor-trimeton tablets passed the Compendial Case One requirements (USP XXI, 2S, 1906). Thorazine spansules and Quinidex tablets were unable to meet the specifications with water as the dissolution medium; the latter showed improved dissolution character in 0.1 N hydrochloric acid. Tenuate Dospan 75 mg tablets showed good release characteristics in water when the authentic (dosing interval (D = 24 hours) was changed to a modified dosing interval of D* = 12 hours. All dissolution aliquots were assayed by UV absorbance measurements at the absorbance maximum for each drug and were also checked for excipient interference. Newer drugs appearing on the market will be more likely candidates for meeting compendial specifications; modified-release pharmaceuticals that appeared before the new specifications may have to be allocated specifically expanded window percentages.     

Dynamic viscosities of mixtures of n-butyraldehyde and isobutyraldehyde over wide ranges in the state parameters

Dynamic-viscosity measurements are reported for liquid mixtures in the system formed by n-butyraldehyde and isobutyraldehyde.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 48, No. 2, pp. 321–322, February, 1985.     

Pesticide monitoring programme of the Ministry of Health of Brazil

The structure of the recently introduced Brazilian government programme for monitoring pesticide residues in six major agricultural products is described. Residues found from the analysis of samples of tomatoes and strawberries are discussed in detail. The much greater frequency of detection of pesticide residues, many of which are not approved for use in Brazil, in produce being sold on the domestic market, as opposed to that produced for export, is of major concern. It is perceived that this new monitoring programme will become permanent and be used to underpin enforcement actions that will need to be taken to reduce the numbers of incidents of illegal residues occurring, particularly in fresh fruits and vegetables.     

Production of maraging steel grades and the influence of specified and nonspecified elements for special applications

The material properties of maraging steels are greatly affected by the alloy and inclusion content and hence by the production route. This paper describes various past and current production routes at Böhler Edelstahl GmbH and the effect of these routes on the specified element (alloy) and non-specified element (inclusion) contents. Non-metallic inclusions were investigated by EDX analysis. The effects of various alloying and tramp elements on the material properties are presented as a statistical evaluation of previous melts. Nitrogen solubility was calculated with Thermo–Calc for maraging steel Mat.-No. 1.6354 and the precipitation of nitrides is discussed. A proposal is made for the production of melts with improved properties.