Palmqvist Crack Extension and the Center-Loaded Penny Crack Analogy

Palmqvist crack extension in WC-Co can be described using the center-loaded penny crack analogy. When Palmqvist cracks are represented by semicircles of diameter l (l=crack length measured from an impression corner), the stress intensity factor which controls crack extension differs from that of a half-penny crack of radius l+a (2a = impression size) by only a slowly varying factor m=2^1/2 (l/a)^1/2; m≅1.0 to 2.4 for WC-Co and m≅0.8 to 1.4 for ceramics.     

Sintering TiO2 in HCl Atmospheres

TiO₂ was sintered in HCl atmospheres to enhance the effects of vapor transport. Little or no densification is observed for temperatures between 1000° and 1300°C. Particle coarsening occurs at temperatures above 1200°C. The apparent activation energy for particle growth is 114 kJ/mol. It is concluded that the primary mass-transport mechanism is vapor transport while the particle growth rate is limited by grain-boundary mobility .     

Effects of Particle Size on the Fusion of Soda–Lime–Silicate Glass Containing NaCl

The coupled effects of particle size and 1 wt% NaCl additions on the sequence of melting reactions in a multicomponent system (sand–soda ash–calcite–dolomite–feldspar) were studied using data from DTA, DTGA, and XRD interactively. Glass batches varied in average particle size from 250 μm to finer than 45 μm. Milestone events in the fusion process of the coarse particle base glass were elucidated. The termination temperature of the last significant reaction associated with CO₂ release was 35°C lower in the fine particle size batch than with the coarsest batch. Liquid-phase formation at ∼523°C in the batch with 1 wt% NaCl occurred to an increasingly sizable extent with decreasing particle size. This contrasts with a similar effect at ∼630°C for a comparable batch without NaCl via eutectic melting between soda ash and dolomite. Sodium chloride additions significantly enhanced dissolution of CaO relic.     

Surface Chemistry of Lead Titanate and Its Impact on Binder Removal

Carbon residue after binder burnout was characterized for several nonstoichiometric lead titanate powders. Thermal decomposition of the poly(methyl methacrylate) (PMMA) binder was performed in nitrogen at 600°C. A drastic decrease in carbon retention was obtained in the case of the titanium-rich samples. The amount of carbon retention varies from 0.2 mg/m² to 1.2 mg/m² by changing the Pb/Ti molar ratio from 0.92 to 1.08. The surface reaction between PMMA and lead titanate particles was studied by diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS). Surface hydroxyls reacted with ester groups in the PMMA or the methylmethacrylate monomer produced upon pyrolysis. The DRIFTS results showed that titaniumrich samples are less reactive and produce less surfacebound organic groups. Interestingly, titanium-rich samples contained more surface hydroxyls. Isoelectric point measurements, however, show that titanium-rich samples are more acidic. Thus, the reactivity of the surface hydroxyls is determined primarily by their acid-base characteristics rather than their concentration. Lead titanate powder was exposed to MMA vapor in a tube furnace at the indicated temperatures using nitrogen carrier gas as a model experiment. DRIFTS difference spectroscopy and Raman spectroscopy were performed on these samples after the exposure. MMA reacts with lead titanate powder in manner similar to PMMA. Analysis for sp ² and sp ³ absorbance of Raman spectra of these exposed powders at 400°–600°C showed pyrolysis behavior of surface-reacted species. The relative amount of sp ² bonded carbon decreases with increasing exposure temperature.     

Autoxidation of saturated fatty acids. II. The determination of the site of hydroperoxide groups in autoxidizing methyl palmitate

The monohydroperoxides of methyl palmitate oxidized at 150C were concentrated, purified, and reduced to yield a mixture of isomers of monohydroxy palmitate. No evidence of unsaturation in these molecules could be obtained, and no direct method for the resolution or identification of the individual isomers was found. Nuclear magnetic resonance (NMR) spectroscopy of the reduced esters suggested that the hydroxy groups were not located at either end of the chain of the fatty ester. To establish the location of the initial oxidative attack on saturated esters, the reduced esters of oxidized methyl palmitate were chemically cleaved at the location of the hydroxy group by means of chromium trioxide oxidation and by the Beckmann transformation. The resulting mono- and dibasic fatty acids were methylated and analyzed by gas chromatography. This analysis indicated that the oxidation of methyl palmitate did not occur selectively at one location along the ester. Although all carbon atoms can apparently be oxidized, preferential oxidation was observed toward the center of the molecule.     

Flood hazard maps in the European context

The implementation of the EU Floods Directive by water authorities across Europe has generated a lack of consistency in the present situation, especially regarding the scales adopted, the hydrological scenarios and the elements represented on flood hazard and risk maps. From the EU-funded project HYTECH, this article presents a general overview of Floods Directive implementation in eight European countries, highlighting the differences between them, with particular attention to flood hazard maps. For the implementation cycle that started at the beginning of 2016, a minimization of such differences is necessary in order to manage flood risk in a better and more integrated way.     

Biodesulfurization of dibenzothiophene sulfone by Arthrobacter sp. and studies with oxidized Illinois No. 6 coal

A bacterium identified as Arthrobacter sp. was grown on dibenzothiophene (DBT) sulfone as a sole source of sulfur, producing sulfite and sulfate. Sulfur in DBT sulfone (1.0 mM) was nearly quantitatively converted to sulfate by the organism. The organism could also use DBT sulfone as a sole source of carbon and energy. There was evidence for transient accumulation of benzoic acid in the culture medium after growth of the cells slowed. The DBT sulfoxide analogue 9-fluorenone was converted by resting cells to a product identified as 1,10-dihydroxy-1,10-dihydrofluoren-9-one, suggesting that DBT sulfone may be metabolized via an angular hydroxylation resulting in carbon- sulfur bond cleavage. This strain of Arthrobacter showed no ability to desulfurize oxidized Illinois No. 6 coal.     

Surface properties of commercial polymer films following various gas plasma treatments

Surface properties of a number of commercial thermoplastic polymer films were investigated before and after brief exposures to RF induced, low temperature gas plasmas. Water wettability and adhesion of vapor deposited aluminum to thin films (8–12 micron) of polyethylene, polypropylene, polyester, polysulfone, polycarbonate, and polyvinylidene fluoride films were studied before and after treatments with oxygen, 96% CF₄/4% O₂, and helium plasmas. Treatment with oxygen plasmas showed the greatest change in water wettability for polyvinylidene fluoride and polypropylene films, while treatment with 96% CF₄/4% O₂ showed dramatic changes in wettability of polycarbonate, polysulfone, and polystyrene. Excellent adhesion of aluminium was found for polymers that had been previously exposed to gas plasmas.     

Statistical Analysis of the Intergranular Film Thickness in Silicon Nitride Ceramics

Silicon nitride materials typically reveal thin amorphous intergranular films along grain boundaries, with only the exception of special boundaries. It is known that such grainboundary films strongly affect the high-temperature properties of the bulk material. High-resolution electron microscopy (HREM) was used to study these amorphous films in different Si₃N₄ ceramics. The observed film thicknesses at grain boundaries in these materials varied between 5and 15 Å. It was shown that the grain-boundary film thickness strongly depends on film chemistry. Careful inspections of film-thickness measurements across grain boundaries in a given material suggest that the film widths vary on the order of 1 Å. Therefore, a quantitative evaluation should allow for the determination of the standard deviation of the film thickness. The amorphous film widths along grain boundaries in four materials were measured over the entire length (up to 1 μm) of the grain boundary between two triple points. Forty to fifty data points were evaluated for each boundary, giving a Gaussian-like distribution of the film thickness around a median value, which corresponded well with the film width measured from single HREM micrographs. The accuracy achieved by the statistical method was better than ± 1 Å.