INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Production of high-alumina cement clinker by fusion in an electric furnace

Conclusions The possibility of obtaining clinker from high-alumina cement by melting a mixture of lime and technical alumina in an electric-arc furnace at the Klyuchevsk Ferroalloy Plant has been shown.The high-alumina cement obtained from fused clinker is significantly better in its physicochemical properties than the cement produced on the basis of the lime-alumina slags from the ferroalloy industry.Translated from Ogneupory, No. 5, pp. 25–27, May, 1984.     

High solids content emulsions. III. Synthesis of concentrated latices by classic emulsion polymerization

Two different methods of producing bi‐ and trimodal latices of a mixture of methyl methacrylate, butyl acrylate, and small amounts of acrylic acid were tested. It is shown that a combination of concentrating blends of seed particles by semibatch reaction, followed by a nucleation of small particles plus a second semibatch phase allowed us to obtain stable latices with solids contents over 65% and viscosities of below 2500 mPa s^?1 with little coagulum formation. The key parameter in determining latex stability, coagulum formation, and viscosity appears to be the the particle size distribution, and especially its modification attributed to secondary nucleation. Because it is not possible to eliminate water‐soluble monomers from the polymerization recipe, secondary (homogeneous) nucleation must be minimized by careful addition of the free‐radical initiator and choice of monomer feed flow rates. The nucleation of the third population in the trimodal latices is best accomplished with a mixed surfactant system because renucleation by anionic surfactant alone leads to detrimental changes in the particle size distribution (PSD) resulting from excessive flocculation of particles. In addition, it was found that the viscosity of the final products was not sensitive to small changes in the ionic strength of the latex, although neutralization to a pH of 6 effectively doubles the final latex viscosity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1916–1934, 2002; DOI 10.1002/app.10513     

Hydrosilylation and dehydrocondensation reactions of methylhydridesiloxane to acrylic and methacrylic acids

The hydrosilylation of α,ω‐bis(trimethylsiloxy) methylhydridesiloxane (degree of polymerization ≈ 53) with acrylic and methacrylic acid with various ratios of the initial compounds, in the presence of platinum hydrochloric acid, has been investigated. In the presence of platinum hydrochloric acid, competitive dehydrocondensation reactions take place with the formation of various oligomers with various chemical links. In the later stages of the reaction, three‐dimensional systems have been obtained. During dehydrocondensation, the reaction order, reaction rate constants, and activation energy have been determined. The structures of the synthesized oligomers have been determined with IR and NMR spectroscopy data. Gel permeation chromatography, differential scanning calorimetry, and X‐ray analyses of the synthesized oligomers have been carried out. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3243–3252, 2007     

Properties of suspensions of electrocorundum and materials based on it

Translated from Steklo i Keramika, No. 11, pp. 28–29, November, 1991.     

Improved methods for the isolation and study of the C18, C20 and C22 monoethylenic fatty acid isomers of biological samples: Hg adducts,HPLC, AgNO3-TLC/FID,and ozonolysis

The monoethylenic isomers of C₁₈, C₂₀ and C₂₂ chain lengths of the depot fat of a nonhominid primate (cynomolgus monkeys,Macaca fascicularis), fed a partially hydrogenated herring oil (IV=76.0) for 30 months, were examined by 2 different approaches. The first isolation method involved preparative gas liquid chromatography and argentation thin layer chromatography (TLC). The second sequence involved a chain-length fractionation system based on the TLC of the methoxy-bromomercuri quence involved a chain-length fractionation system based on the TLC of the methoxy-bromomercuri adducts of the total methyl esters to isolate groups of acids of common degrees of unsaturation, and then high performance liquid chromatography on a reverse-phase column. In both cases, the monoethylenic isomer distribution was determined by ozonolysis in BF₃/MeOH. Comparable results were obtained with the 2 methods. The second approach is recommended for small biological samples, especially for those containing a relatively high proportion of di- and other polyethylenic isomers which might interfere. Presented in part at the AOCS annual meeting, New Orleans, May 1981.     

An oxygen sensor based on the semiconducting properties of (U0.3Y0.7)O2−x

Urania-yttria fluorite solid solutions with a U/Y ratio below 0.33/0.67 and having n-type conductivity are suggested as oxygen sensing materials. The electrical properties of one composition, (U_0.3Y_0.7)O_2–x , have been studied in detail. The resistance of this composition follows a (pO₂) ⁿ relationship over an oxygen concentration range of 0.1 to 100% and shows long-term stability. The value ofn decreases with increase in temperature (0.23 at 400° to 0.15 at 800°C), but is reproducible for a large number of specimens. A method for determining oxygen partial pressure in hot gases using these urania-yttria solid solutions as the sensing material is described.     

HEAT TRANSFER BETWEEN ROUGH SURFACES IN CONTACT OVER A HIGHLY ELLIPTICAL CONTOUR AREA: COMPARISON OF EXPERIMENTAL AND NUMERICAL RESULTS

This paper describes experimental and numerical studies of heat transfer between surfaces in contact over a highly elliptical area in a gas or in vacuum. Measurements of the steady-state thermal resistance of a high aspect ratio contact formed between cylindrical steel surfaces with widely different radii of curvature (76 cm vs 0.95 cm) are reported for two levels of surface roughness (0.05 μm and 1.0 μm rms) and compared to 3-D numerical results obtained with the multigrid method. Theoretical results obtained by evaluating the contact conductance acting over each surface element within the contour area with a method developed previously for rough but nominally flat surfaces are shown to be in excellent agreement with the rough surface experimental data.